VAV Omron

Basic Switch Common Accessories Separator (Sold Separately) To ensure a secure insulation distance, or if there are other metal parts or copper wire installed too close to the Switch, use the Switch with insulation guard or use a separator purchased separately to keep the insulation distance. List of models Appearance Applicable Switches Thickness (mm) Model V 0.18 SEPARATOR FOR V0.18 D3V-01 VX D2MV D2RV Separator 0.25 SEPARATOR FOR V0.25 D2VW 0.18 SEPARATOR FOR SS0.18 SS SS-P D2S D2SW Separator D2SW-P 0.4 SEPARATOR FOR SS0.4 Note. The Separator is made of EAVTC (epoxy alkyd/varnish tetron cloth) and has heat-resistant temperature of +130C. Dimensions (Unit: mm) SEPARATOR FOR V0.18 SEPARATOR FOR V0.25 2-3.2 dia. holes 3 14 8 0.1 10.3 24 0.1 11 22.2 38 SEPARATOR FOR SS0.18 SEPARATOR FOR SS0.4 2-2.6 dia. holes +0.28 12 0.12 +0.23 7 0.17 0.1 9.5 7 21.6 B-149 Basic Switch Common AccessoriesBasic Switch Common Accessories Actuator (Sold Separately) Actuators are supplementary components used when operating The VAV models can be used where a small Operating Force the Switch using cams or dogs or when transmitting mechanical (OF) is required. movements that are not in alignment with the switch plunger. These Actuators do not include Switches. The VAL models are suitable for cases where a Switch is Note. Switches with the operated by a rotary cam or sliding devices with relatively low mounting holes shown in 10.30.15 operation frequency. the diagram can be used except for special The VAM models are designed to operate in reverse movements models. 0.15 22.2 and have high shock and vibration resistance. Since the Overtravel (OT) of these models is rather large, they can be used for automatic control or door switches of machining tools. Dimensions (Unit: mm) / Operating Characteristics * Model numbers are for the Actuators only. The value given for operating characteristics are reference values. For operating characteristics of models not listed above, consult your OMRON sales representative. Leaf Spring Model VAL t=0.3, width 4.7* In the case of A 5.6 21.8 Operating characteristics V-15-1A5 Operating Force OF Max. 2.26 N 230 gf 0.1 5.1 FP Releasing Force RF Min. 0.49 N 50 gf OP 18.2 0.15 10.3 Overtravel OTMin. 0.8 mm Movement Differential MD Max. 0.4 mm 2-M316 Free Position FP Max. 17 mm 2.8 22.20.15 *Stainless-steel lever Operating Position OP 14.90.5 mm 27.8 Note. Pin plunger (Designed for models of OF 1.96 N 200 gf or greater). Simulated Leaf Spring VAL12 5.6 In the case of t=0.3* Operating characteristics V-15-1A5 A 20.6 4.7 R2.4 Operating Force OF Max. 2.26 N 230 gf 5.8 Releasing Force RF Min. 0.49 N 50 gf 5.1 FP OP Overtravel OT Min. 0.8 mm 18.2 0.15 10.3 Movement Differential MD Max. 0.4 mm Free Position FP Max. 22.9 mm Operating Position OP 20.50.8 mm 2-M316 0.15 2.8 22.2 Note. Pin plunger (Designed for models of OF *Stainless-steel lever 27.8 1.96 N 200 gf or greater). Roller Leaf Spring VAL2 In the case of 5.6 4.8 dia.4.8* Operating characteristics V-15-1A5 VAL02 A 20.6 4.8 Operating Force OF Max. 2.26 N 230 gf Releasing Force RF Min. 0.49 N 50 gf 5.10.25 Overtravel OTMin. 0.8 mm FP OP Movement Differential MD Max. 0.4 mm 18.2 0.05 10.3 Free Position FP Max. 22.6 mm Operating Position OP 20.50.5 mm 2-M316 0.08 2.8 22.2 Note. Pin plunger (Designed for models of OF * VAL2: polyacetal resin roller 27.8 1.96 N 200 gf or greater). VAL02: Stainless-steel roller Note1. Unless otherwise specified, a tolerance of 0.4mm applies to all dimensions. Note2. The operating characteristics are for operation in the A direction ( ). B-150 Basic Switch Common Accessories