Two-circuit Limit Switch WL-N Select the Best Two-circuit Switch for the Operating Environment and Application. Standard-feature crossbar contacts provide high contact reliability. Applicable to either standard loads or microloads. Standard features include 90 overtravel, one- side operation, and four-direction mounting. IP67 degree of protection. Approved standards: EN/IEC, UL, cUL, and CCC. Contact your OMRON representative for information on approved models. Be sure to read Safety Precautions on page 24 to 26 and Safety Precautions for All Limit Switches. Features Easy to Select Easy to See (Models with Operation Indicators) The contacts can be used with either standard loads or microloads. An indicator with a wide field of view has been used. Standard features include 90 overtravel, one-side operation, and four-direction mounting. Easy to Work With Downsizing of the built-in switch has increased the space to house the wiring. Steel screws that are attracted by magnetic screwdrivers have been used for the terminal screws inside the Switches. Resin and elastomer resistance has replaced the insulating paper. Internal Structure WL WL-N *1 A 3D structure disperses light Whether the indicator is lit can be clearly seen from the side. More space *1. The wiring method is different for models with indicators. Refer to Wring on page 25 under Safety Precautions. Easy tightening with magnetized screwdrivers 1WL-N Product Configuration Lineup of rotational lever models Additional series planned in the future: plunger models, fork lever lock models, and flexible rod models Basic Switches WLC -N High-sensitivity Switches WLG -N Standard High-precision Switches Use the WL Series. *1 Protective General-purpose Indicator-equipped Switches: Neon lamps Use the WL Series. *1 Operation indicators Indicator-equipped Switches: Light emitting diodes (LED) WL -LD-N Direct-wired Switches WL - LDK -N Sensor I/O connectors Pre-wired Switches WL - LD-M1 -N WL - LD-AGJ -N WL - LD-DGJ -N Heat-resistant Switches WL -TH-N Low-temperature Switches WL -TC-N Weather-proof Switches WL -P1-N Environment-resistant Airtight Switches Use the WL Series. *1 Hermetic Switches Corrosion-proof Switches Basic Switches WLC - S-N Spatter-prevention High-sensitivity Switches WLG - S-N High-precision Switches Use the WL Series. *1 Use the WL Series. *1 Long-life *1. Planned to be added to the WL-N Series in the future. 2