XC5 DIN Twin-contact Connectors A Wide Variety of DIN Connectors That Conform to UL/CSA Standards. Fully preserve the characteristics of normal DIN con- nectors while increasing the number of terminals avail- able. A wide product range to fit almost any application. Meeting world market needs with products ranging from one-piece connectors (card edge) to two-piece connec- tors. Use the twin-contact system for high reliability and low cost. Lower insertion force as a result of FEM analysis tech- niques. Mates with OMRON s XC6-series connectors. Conform to UL standards (file no. E103202) and CSA standards (file no. LR 62678). RoHS Compliant Ratings and Characteristics Materials and Finish Item Plugs Sockets Rated current 2 A (See note 2.) Rated voltage 300 VAC Housings Fiber-glass reinforced PBT resin (UL94V-0)/gray Contact resistance 20 m max. (at 20 mV, 100 mA max.) Contacts Mating Brass/nickel base, Phosphor bronze/nickel 6 end 0.4- m gold plating base, 0.4-m gold plating Insulation resistance 10 M min. (at 100 VDC) (See note 1.) (See note 1.) Dielectric strength 1,000 VAC for 1 min (leakage current: Terminal Brass/nickel base, Phosphor bronze/nickel 1 mA max.) 2.0- m tin plating base, 2.0-m tin plating Total insertion force 0.59 N max. per contact Note: 1. For non-standard plating specifications, contact your OMRON representative. Removal force 0.15 N min. (with test gauge, t = 0.56 mm) 2. Wrap terminal contacts are made from phosphor bronze. Insertion durability 200 times Applicable Wrap Post Wire Sizes Ambient operating Operating: 55 to 125 C (with no icing) AWG30, AWG28, AWG26, or AWG24 temperature (Solid wire: 0.25 to 0.51 mm dia.) Wrap Post Length 3 wires 1XC5E Double-row Plugs, DIN Q-type (Reverse) Dimensions (unit: mm) XC5E- 21 (With straight DIP terminals) Two, 2.8 dia. Coding Key position XC5E DIP terminal cross-section view (Straight DIP terminals) (Straight wrap terminals) 0.7 dia. XC5E- 23 (With straight wrap terminals) Mounting holes (bottom view) XC5E Wrap terminal cross-section +0.1 +0.1 0.8 dia. (DIP terminals) Two, 2.8 dia. 1.0 dia. (Wrap terminals) 0 0 view Dimensions No. of Dimensions (mm) Coding Key positions contacts (contact No.) AB CD E F 20 38.9 32.1 22.86 34.12 28.1 29.3 3, 8 32 54.2 47.4 38.10 49.36 43.3 44.6 5, 12 0.9 dia. 44 69.4 62.6 53.34 64.60 58.5 59.8 4, 9, 14, 19 50 77.0 70.2 60.96 72.22 66.2 67.4 5, 10, 16, 21 64 94.8 88.0 78.74 90.00 83.9 85.2 6, 13, 20, 27 100 140.5 133.7 124.46 135.72 129.7 130.9 10, 20, 31, 41 Ordering Information No. of Terminal type contacts Straight DIP terminals Straight wrap terminals 20* XC5E-2021 XC5E-2023 32 XC5E-3221 XC5E-3223 44* XC5E-4421 XC5E-4423 50* XC5E-5021 XC5E-5023 64 XC5E-6421 XC5E-6423 100* XC5E-0121 XC5E-0123 *Marked items have an increased number of contacts while following DIN standards. 4 DIN Twin-contact Connectors XC5