XC5 DIN Twin-contact Connectors A Wide Variety of DIN Connectors That Conform to UL/CSA Standards. Fully preserve the characteristics of normal DIN con- nectors while increasing the number of terminals avail- able. A wide product range to fit almost any application. Meeting world market needs with products ranging from one-piece connectors (card edge) to two-piece connec- tors. Use the twin-contact system for high reliability and low cost. Lower insertion force as a result of FEM analysis tech- niques. Mates with OMRON s XC6-series connectors. Conform to UL standards (file no. E103202) and CSA standards (file no. LR 62678). RoHS Compliant Ratings and Characteristics Materials and Finish Item Plugs Sockets Rated current 2 A (See note 2.) Rated voltage 300 VAC Housings Fiber-glass reinforced PBT resin (UL94V-0)/gray Contact resistance 20 m max. (at 20 mV, 100 mA max.) Contacts Mating Brass/nickel base, Phosphor bronze/nickel 6 end 0.4- m gold plating base, 0.4-m gold plating Insulation resistance 10 M min. (at 100 VDC) (See note 1.) (See note 1.) Dielectric strength 1,000 VAC for 1 min (leakage current: Terminal Brass/nickel base, Phosphor bronze/nickel 1 mA max.) 2.0- m tin plating base, 2.0-m tin plating Total insertion force 0.59 N max. per contact Note: 1. For non-standard plating specifications, contact your OMRON representative. Removal force 0.15 N min. (with test gauge, t = 0.56 mm) 2. Wrap terminal contacts are made from phosphor bronze. Insertion durability 200 times Applicable Wrap Post Wire Sizes Ambient operating Operating: 55 to 125 C (with no icing) AWG30, AWG28, AWG26, or AWG24 temperature (Solid wire: 0.25 to 0.51 mm dia.) Wrap Post Length 3 wires 1XC5H Triple-row Sockets, DIN R-type (Reverse) Dimensions (unit: mm) XC5H- 22 A (With right-angle DIP terminals) B C 2.54 10.6 8.5 2.54 3 2.54 1 Coding Key slot 6.3 10 12.4 3 2.54 2.54 Two, 2.8 dia. 2.54 E 3.85 D 2.9 6 XC5H Mounting holes (bottom view) DIP terminal cross-section view +0.1 0.8 dia. 0 Two, 2.8 dia. 0.75 dia. Dimensions No. of Dimensions (mm) Coding Key slot contacts positions (contact No.) A BCD E 48 53.2 44.4 38.10 48.26 42.3 5, 12 64* 93.8 85.0 78.74 88.90 82.9 6, 13, 20, 27 96 93.8 85.0 78.74 88.90 82.9 6, 13, 20, 27 *Has no center row (row b). Ordering Information No. of contacts Terminal type Model 48 Right-angle DIP XC5H-4822 terminals 64* XC5H-6422 96 XC5H-9622 *Has no center row (row b). DIN Twin-contact Connectors XC5 9