XM2S-0911-E Omron

D-sub Connector Assembly Hood with ESD Protection XM2S-E Connector Hood with ESD Protection Simplifies Circuit Design Non-conductive surface protects against ESD (static electricity). Internal grounding provides EMI protection. Screwdrivers eliminated by overmold jackscrews. RoHS Compliant Structural Diagram (Assembled) Overmold jackscrew Insulated enclosure Securing Connectors is Non-conductive surface easier because screwdrivers provides ESD protection. are not needed. Cable Wrapped in shielded tape and secured with a clamp. Grounding structure Internal grounding plate provides EMI protection. Performance, Materials, and Finishes Ambient operating temperature 25 to 85C (with no condensation or icing) Cover ABS (UL94 V-0)/black Grounding plate Phosphor bronze/nickel plating Jackscrew ABS (UL94 V-0)/black Dimensions (unit: mm) Max. applicable cable diameter: 9 dia. XM2S-0911-E D-sub Connector Assembly Hood with ESD Protection 15 11 13 40.8 18.2 24.99 M2.6 0.45 32.2 1 Ordering Information Type Appearance No. of contacts Model D-sub Connector Assembly Hood with ESD protection 9 XM2S-0911-E Precautions Correct Use Use a torque of 0.25 Nm to secure the cable clamp to the Hood. When you tighten the jack screws, hold the hood and make sure that the Connector is connected straight. If the screws are tightened when the Connector is not connected completely, the Connector may be damaged. Always use your fingers to tighten the jack screws. If you use pliers or any other tool to tighten the jack screws, the screws may be dam- aged. 2 D-sub Connector Assembly Hood with ESD Protection XM2S-E