Slim D-Sub Connector XM3-LS Space-saving 9-pin Slim D-sub Connectors for Boards Board mounting area is reduced by 33% (compared with previous models) using depth of 8.4 mm. Nine D-sub right-angle DIP terminals. RoHS Compliant Molding material 30% reduction (Compared with previous model XM2C-L) Footprint on board reduced by 33% over previous models. 12.6 mm 8.4 mm Reduced by 4.2 mm. Previous model Slim model Ratings and Characteristics Materials and Finish Rated current 3 A Housing PBT (UL94 V-0)/black Rated voltage 300 VAC Socket Phosphor bronze/nickel base, flash gold plated Contacts Contact resistance 20 m max. (at 20 mVDC, 100 mA max.) Plug Brass/nickel base, flash gold plated Insulation resistance 1,000 M min. (at 500 VDC for 1 min) Shell Steel/nickel plated Withstand voltage 1,000 VAC for 1 min (leakage current: 1 mA max.) Anchors Stainless steel Insertion durability 100 times Grounding fixture Phosphor bronze/tin plated Operating temperature 25 to 105C (with no condensation or icing) Ordering Information Socket Plug Appearance Appearance No. of contacts No. of contacts M2.6 0.45 4-40 UNC M2.6 0.45 4-40 UNC Anchors Anchors 9 XM3B-0942-112LS XM3B-0942-132LS 9 XM3C-0942-112LS XM3C-0942-132LS 1+0.1 Nine, 1 dia. 0 T , 3.2 0.1 dia. wo XM3-LS Slim D-Sub Connector Dimensions (Unit: mm) Socket XM3B-0942-1 2LS 30.8 Mounting Holes 24.99 (BOTTOM VIEW) 16.3 14.7 2.74 24.99 0.05 Anchors 2.74 0.05 Board edge 1.905 5.85 Note: Applicable board thickness: 1.0 or 1.6 mm. Plug XM3C-0942-1 2LS Panel Cutout 30.8 24.99 14.5 31.0 min. 16.92 5.8 5.8 2.74 Anchors Two, R3.2 11.4 min. 6.4 min. Four, R2.5 1.905 Note: Applicable panel thickness is 1.2 mm max. 5.85 Note: The mounting hole and panel cutout dimensions are the same for the Sockets and Plugs. Precautions Precautions for Correct Use Insert the connector into the board and then simultaneously Automatic Soldering dip-solder the connector terminals and lock pins to the board. Automated Soldering Conditions (Jet Flow) Pull or push the connector straight in or out when you connect or (1) Soldering temperature: 250 5C disconnect it. Twisting it may cause damage or faulty contact. (2) Continuous soldering time: within 5 1 s max. Do not remove the anchors from the connector. Removing the Mating anchors may cause damage or faulty contact. Do not connect the Connectors in the wrong direction, otherwise The Plugs cannot be secured to a panel. it may be damaged. Board Board (t=1.6 mm) (t=1.0 mm) Lock pin grounding fixture Lock pin grounding fixture Please check each region s Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas Europe