XS2F-D421-J80-F Omron

Round Water-resistant Connectors (M12) XS2 CSM XS2 DS E 4 2 Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors meet IP67 requirements and ensure a 94V- 0 fire retardant rating. A wide array of connectors makes a wiring system more modular, simplifies maintenance, and reduces downtime. Connectors with Cables and Connector Assemblies are available. Three types of Connector Assembly: Crimping, soldering, and screw-on. Connectors with Cables are UL certified. Based on IEC61076-2-101 (IEC 60947-5-2) and NECA 4202. Refer to Safety Precautions on page 20. Construction (XS2G Soldering Connector Plug Materials and Finish Assemblies) Item XS2F/H/W XS2M/R/P XS2C/G Phosphor Materials Brass Lock spring Watertight bushing bronze Contacts Finish Nickel base, 0.4-m gold plating Fixture Solder-cup pin Cable clamp Materials Brass * Thread bracket Finish Nickel plated * PBT resin PA resin PBT resin Materials (UL94V-0) (UL94V-0) (UL94V-0) Pin block Finish For DC: light gray for AC: dark gray O-ring/rubber bushing Rubber PBT resin PBT resin O-ring Cover --- (UL94V-0) (UL94V-0) Contact block Cover Cap PBT resin Cap --- --- (UL94V-0) Ratings and Specifications PA resin Cable clamp --- --- (UL94V-0) Rated current 3 A PBT resin Pin clamp --- --- (UL94V-0) Rated voltage For DC 125 VDC, for AC 250 VAC LCP resin Contact resistance (Connector) 40 m max. (20 mV max., 100 mA max.) Lock spring --- --- (UL94V-0) Insulation resistance 1,000 M min. (at 500 VDC) Watertight bushing --- --- Rubber 1,500 VAC for 1 min (leakage current: Dielectric strength (Connector) Ring --- --- Steel 1 mA max.). Degree of protection IP67 (IEC529) *The T-joint of the XS2R is aluminum/white. Insertion tolerance 200 times min. Tensile: 98 N/15 s Socket Appearance Assembled fixture strength Torsion: 0.98 Nm/15 s Cable diameter: 6 mm 98 N/15 s DC type AC type Cable holding strength 4 to 5 mm 49 N/15 s Male (plug) Female (socket) Male (plug) Female (socket) 3 mm 29 N/15 s contacts contacts contacts contacts Ambient operating temperature Operating: 25C to 70C range 1 1 2 2 4 4 Ambient humidity range 20% to 85% 2 2 1 3 1 3 4 3 4 3 Recommended Cables Note: The AC and DC connectors are different as shown here and therefore cannot be connected together. Core sizes Cable outer Soldering Screw-on diameter Crimping models models models 8 mm 7 to 8 mm --- --- 7 mm 6 to 7 mm 0.18 to 6 mm 5 to 6 mm Two types of contacts 2 0.75 mm are available. 4 mm 4 to 5 mm 2 0.5 mm max. 2 0.18 to 0.3 mm 3 mm 3 to 4 mm 2 0.5 to 0.75 mm 1XS2 List of Products Name Model Appearance XS2W Sockets and Plugs on Cable Ends XS2F Sockets on One Cable End 1. Connectors attached to Cable XS2H Plugs on One Cable End XS2G Plug Assemblies XS2C Socket Assemblies 2. Connector Assemblies (Crimp- ing, Soldering, or Screw-on) XY2F Crimp Tool (for Crimping Connectors) Used to enable using connec- tors for sensor cables and relay cables. XW4Z Screwdriver (for Screw-on Connectors) 3. Terminal Box Connectors XS2P Panel-mounting Sockets Used to enable using connec- tors for terminal boxes. AB T-Joints C 4. T-Joints and Y-Joints XS2R T-Joint/Y-Joint Used for branching and for Plug/Socket Connectors daisy-chain connections. Y-Joints Embedded Plugs with 5. Sensor Connector Assemblies Screw Threads XS2M Plugs Used to enable using connec- Embedded Plugs with tors in sensors. No Screw Threads Flange-mounting Plugs 6. Panel-mounting Connectors XS2M Plugs Used to enable using I/O box connectors mounted to panels. Screw-mounting Plugs 2