IO-Link Proximity Sensor (Standard Models) E2E- -IL CSM E2E- -IL DS E 1 1 IO-Link Makes Sensor Level Information Visible and Solves the Three Major Issues at Manufacturing Sites Standard Proximity Sensor. Downtime can be reduced. Notifies you of faulty parts and such phenomena in the Sensor in real time. The frequency of sudden failure can be decreased. Notifies you of objects being too far or too close. The efficiency of changeover can be improved. The batch check for individual sensor For the most recent information on models that have been certified for IDs significantly decreases commissioning time. safety standards, refer to your OMRON website. Standard Sensor for detecting ferrous metals. Be sure to read Safety Precautions on page 5. Ordering Information Sensors Refer to Dimensions on page 6. DC 3-wire IO-Link Models Model Pin IO-Link Appearance Sensing distance Connection method arrangement baud rate PNP COM2 (38.4 kbps) E2E-X3B4-IL2 2M Pre-wired Models --- (2 m) COM3 (230.4 kbps) E2E-X3B4-IL3 2M M12 3 mm M12 Pre-wired Smartclick 1: +V COM2 (38.4 kbps) E2E-X3B4-M1TJ-IL2 0.3M Connector Models 3: 0 V COM3 (230.4 kbps) E2E-X3B4-M1TJ-IL3 0.3M (0.3 m) 4: C/Q output COM2 (38.4 kbps) E2E-X7B4-IL2 2M Pre-wired Models --- Shielded (2 m) COM3 (230.4 kbps) E2E-X7B4-IL3 2M M18 7 mm M12 Pre-wired Smartclick 1: +V COM2 (38.4 kbps) E2E-X7B4-M1TJ-IL2 0.3M Connector Models 3: 0 V COM3 (230.4 kbps) E2E-X7B4-M1TJ-IL3 0.3M (0.3 m) 4: C/Q output COM2 (38.4 kbps) E2E-X10B4-IL2 2M Pre-wired Models --- (2 m) COM3 (230.4 kbps) E2E-X10B4-IL3 2M M30 10 mm M12 Pre-wired Smartclick 1: +V COM2 (38.4 kbps) E2E-X10B4-M1TJ-IL2 0.3M Connector Models 3: 0 V COM3 (230.4 kbps) E2E-X10B4-M1TJ-IL3 0.3M (0.3 m) 4: C/Q output Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file). Accessories (Sold Separately) Sensor I/O Connectors (Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) Sensor I/O Connector Type Appearance Cable length Applicable Proximity Sensor model number model number Straight 2 m XS5F-D421-D80-F 5 m XS5F-D421-G80-F Socket on one cable end L-shape 2 m XS5F-D422-D80-F 5 m XS5F-D422-G80-F E2E-X B4-M1TJ-IL Straight/straight 2 m XS5W-D421-D81-F 5 m XS5W-D421-G81-F Socket and plug on cable ends * L-shape/L-shape 2 m XS5W-D422-D81-F 5 m XS5W-D422-G81-F Note: Refer to Sensor I/O Connector/Sensor Controller on your OMRON website for details. * There are also straight type/L-shape type combinations available. 1E2E- -IL Ratings and Specifications DC 3-wire IO-Link Models (E2E-X B4-IL ) Size M12 M18 M30 Shielded Shielded Item Model E2E-X3B4-IL E2E-X7B4-IL E2E-X10B4-IL Sensing distance 3 mm 10% 7 mm 10% 10 mm 10% Set distance *1 0 to 2.4 mm 0 to 5.6 mm 0 to 8 mm Differential travel 10% max. of sensing distance Ferrous metal Detectable object (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 3.) Standard sensing object Iron, 12 12 1 mm Iron, 18 18 1 mm Iron, 30 30 1mm Response frequency *2 1 kHz 0.5 kHz 0.4 kHz Power supply voltage 10 to 30 VDC (including 10% ripple (p-p)) Current consumption 20 mA max. Load current 100 mA max. Control output Residual voltage 2 V max. (Load current: 100 mA, Cable length: 2 m) In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and stability indicator (green, lit) Indicators *1 In the IO-Link mode: Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) PNP NO/NC switching type (Factory setting: NO) Operation mode Refer to the timing charts under I/O Circuit Diagrams on page 4 for details. Power supply reverse polarity protection, output reverse polarity protection, surge suppressor, and Protection circuits output short-circuit protection Ambient temperature range Operating/Storage: -25 to 70C (with no icing or condensation) Ambient humidity range Operating/Storage: 35% to 95% (with no condensation) Temperature influence 10% max. of sensing distance at 23C in the temperature range of -25 to 70C Voltage influence 1% max. of sensing distance at rated voltage in the rated voltage 15% range Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions 2 Shock resistance Destruction: 1,000 m/s 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67, in-house standards: oil-resistant *3 Connection method Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m) Case Nickel-plated brass Sensing surface PBT Materials Clamping nuts Nickel-plated brass Toothed washer Zinc-plated iron Operation mode switching between NO and NC, self diagnosis enabling, excessive proximity judgment Main IO-Link functions distance selecting, timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting function, monitor output, operating hours read-out, and initial reset IO-Link Ver 1.1 specification Communication Baud rate -IL3: COM3 (230.4 kbps), -IL2: COM2 (38.4 kbps) specifications Data length PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE 2 2) Minimum cycle time -IL3 (COM3): 1 ms, -IL2 (COM2): 2.3 ms Accessories Instruction manual Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file). *1. In the Standard I/O mode (SIO mode), use the product in a range that the green stability indication lamp is lit. (Although the lamp is turned off when the object detected has approached excessively, the detection performance is stable.) In the IO-Link mode, use the product in a range that the Byte1 bit4 for instability detection is zero. (Although the Byte1 bit5 for excessive proximity detection is one if the object detected has approached excessively, the detection performance is stable.) Please contact your OMRON sales representative regarding assignment of data. *2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. *3. Oil resistance in-house standard: Performance with Oil resistance test respect to water insoluble oil. After the test time elapses, the characteristics Test oil: Water insoluble oil (Test at right) below are checked for problems. Velocite No. 3 (1) Visual appearance (no damage that (manufactured by affects product characteristics) Exxon Mobil) (2) Operation check (ON/OFF) 50C 250 hours (3) Insulation resistance (50 M min. at Depth 10 cm 500 VDC) (4) Dielectric strength (500 VAC, 1 min.) Sensor (5) Water resistance (IP67) 2