XW3D-P852-G11 Omron

Connector Terminal Boxes XW3D Simple Wiring of Sensors, Limit Switches and Actuators Greatly reduce wiring in combination with the Smartclick XS5. Also improves maintenance efficiency. Features Smartclick connections that enable the connectors to be locked by simply inserting them and turning them approximately 1/8 of a turn. A positive click indicates locking. Because these support Smartclick connections, attaching and removal of central ports (8-port type) is made easier. Higher rated current to enable output applications. Use previous M12 screw connectors. Refer to Safety Precautions on page 8. Model Number Structure Model Standards Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. 1 2 3 4 1. No. of Ports 3. Applicable Sensor Types, No. of I/O (each port) 4. Cable Length P4: 4 2: 2-wire DC, No. of I/O (each port) 1 G: 5 m P8: 8 3: 3-wire DC PNP, No. of I/O (each port) 1 H: 7 m 5: 3-wire DC NPN, No. of I/O (each port) 1 J: 10 m 2. Connector Poles 7: 3-wire DC PNP, No. of I/O (each port) 2 K: 15 m 8: 3-wire DC NPN, No. of I/O (each port) 2 No. of connector poles: 5 1 XW3D Ordering Information Main Unit No. of No. of Cable Applicable No. of I/O Cable length connector Circuits connection Model specifications sensor type (each port) (m) poles ports 5 XW3D-P453-G11 41 7 XW3D-P453-H11 10 XW3D-P453-J11 5 XW3D-P853-G11 7 XW3D-P853-H11 PNP 3-wire DC 81 10 XW3D-P853-J11 15 XW3D-P853-K11 Standard 5 5 XW3D-P457-G11 cable (PVC) 42 7 XW3D-P457-H11 10 XW3D-P457-J11 41 5 XW3D-P455-G11 NPN 3-wire DC 81 5 XW3D-P855-G11 42 5 XW3D-P458-G11 41 5 XW3D-P452-G11 PNP/NPN 2-wire DC 81 5 XW3D-P852-G11 Accessories (Sold Separately) Waterproof Cover Appearance Model Material Remarks The Waterproof Cover ensures IP67. When XS5Z-11 PBT mounting the Water-resistive Cover to a Connector, be sure to apply a torque range between 0.39 and 0.49 Nm to tighten the Water-resistive Cover. Brass with XS2Z-22 XS5Z-11 is Smartclick mechanism. There s no Ni plating need to keep track of locking torque. Note 1. The XW3D comes with a dust cover. If IP67 degree of protection is required, use the XS5Z-11 or XS2Z-22 (sold separately). 2. The XS2Z-22 connection is threaded. 2