Motor Timer H2C Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and Application Considerations (page 12), and Safety Precautions (page 10). DIN-sized (48 x 48, 45 x 75 mm) Motor Timer with Variable Time Ranges Five time ranges are selectable per timer unit. Easy-to-monitor neon lamp for timing operation indication (for 110, 120, 220, 240 VAC types only). Easy-to-set large transparent knob and easy-to-read single pat- tern scale facilitate time setting. Equipped with timing operation indicator and moving pointer. Conforms to EN61812-1 and IEC60664-1 4 kV/1 for Low Volt- age, and EMC Directives (except for H2C-F ). Model Number Structure Model Number Legend H2C- 12 1. External Connection/Attachment 2. Operation/Resetting System None: 11-pin socket None: Time-limit operation/self-resetting S: 11-pin socket/time setting ring R: Time-limit operation/electric resetting 8: 8-pin socket F: Front screw Ordering Information List of Models Operation/resetting Internal Terminal Time-limit Instantaneous Attachment Model system connection contact contact Time-limit operation/ Parallel motor and 8-pin socket SPDT SPDT --- H2C-8 self-resetting clutch connection Separate motor 11-pin socket H2C and clutch connec- Y92A-Y1 Time Set- H2C-S tion ting Ring Front screw --- H2C-F Time-limit operation/ 8-pin socket SPDT --- --- H2C-8R electric resetting 11-pin socket SPDT H2C-R Y92A-Y1 Time Set- H2C-SR ting Ring Front screw --- H2C-FR Note: Specify both the supply voltage and time range code (A, B, or C) in addition to the model number when ordering. Example: H2C-S 24 VAC B Time range code Supply voltage Motor Timer H2C 1 Discontinued Accessories (Order Separately) Name/specifications Models Flush Mounting Adapter Y92F-30 Time Setting Ring (See note 1.) Y92A-Y1 Mounting Track 50 cm (l) 7.3 mm (t) PFP-50N 1 m (l) 7.3 mm (t) PFP-100N 1 m (l) 16 mm (t) PFP-100N2 End Plate PFP-M Spacer PFP-S Protective Cover Y92A-48B Track Mounting/Front Connecting 8-pin P2CF-08 Socket 8-pin, finger safe type P2CF-08-E 11-pin P2CF-11 11-pin, finger safe type P2CF-11-E Back Connecting Socket 8-pin, screw terminal P3G-08 8-pin, finger safe type P3G-08 with Y92A-48G (See note 2.) 11-pin P3GA-11 11-pin, finger safe type P3GA-11 with Y92A-48G (See note 2.) Hold-down Clip (See note 3.) For PL08 and PL11 Sockets Y92H-1 For PF085A Socket Y92H-2 Note: 1. Supplied with H2C-S/-SR models. 2. Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 or P3GA-11 Socket. 3. Hold-down Clips are sold in sets of two. Specifications Time Ranges Five time ranges are available for each timer by turning the time range selector every 60 degrees. Note: Rated time is displayed on the window. Time range code Position of time range selector A 1.25 to 30 s 7.5 s to 3 min 1.25 to 30 min 7.5 min to 3 h 1.25 to 30 h B 0.2 to 6 s 2 to 60 s 0.2 to 6 min 2 to 60 min 0.2 to 6 h C 0.5 to 12 s 5 to 120 s 0.5 to 12 min 5 to 120 min 0.5 to 12 h Ratings Item H2C Rated supply voltage (motor and 24, 48, 100, 110, 115, 120, 200, 220, or 240 VAC (50/60 Hz) (see note) clutch) Operating voltage range 85% to 110% of rated supply voltage Power consumption 4.2 VA max. (3.96 W max.) Reset voltage 10% max. of rated supply voltage Reset time Minimum power-opening time:0.5 s Minimum pulse width: 0.5 s Control outputs 6 A at 250 VAC, resistive load (cos = 1) Mounting method Flush mounting (except for H2C-F/-FR models), surface mounting, DIN track mounting Note: The front panel of the timer is color coded to identify the following supply voltage classifications: 100 to 120 V: Blue 200 to 240 V: Red Other classes: Black 2 Motor Timer H2C Discontinued
