ZAP-2A Omron

Pushbutton Switch (Cylindrical 30-dia.) ZAP CSM ZAP DS E 4 1 Long Service Life with Built-in Z-series Basic Switch Using a Basic Switch enables direct switching of large-capacity loads Shock-absorbing construction of Operation Unit protects the Switch Drip-proof Pushbutton construction enab les use in locations subject to splashing water and oil and scattering dust. Pushbuttons are available in three shapes and six colors. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions on page 3. Ordering Information Operation Unit color Shape of Operation Classification Output Unit Blue (-A) Black (-B) Green (-G) Red (-R) White (-W) Yellow (-Y) 1 ZAP-A ZAP-B ZAP-G ZAP-R ZAP-W ZAP-Y 36 dia. 25 dia. 2 2ZAP-A 2ZAP-B 2ZAP-G 2ZAP-R 2ZAP-W 2ZAP-Y 1 ZAP-1A ZAP-1B ZAP-1G ZAP-1R ZAP-1W ZAP-1Y Momentary 36 dia. 25 dia. operation 2 2ZAP-1A 2ZAP-1B 2ZAP-1G 2ZAP-1R 2ZAP-1W 2ZAP-1Y 1 ZAP-2A ZAP-2B ZAP-2G ZAP-2R ZAP-2W ZAP-2Y 40 dia. 2 2ZAP-2A 2ZAP-2B 2ZAP-2G 2ZAP-2R 2ZAP-2W 2ZAP-2Y Note: Models with special specifications are available for use in environments with high humidity or outdoors. Contact your OMRON representative for information. Specifications Ratings Item Non-inductive load (A) Inductive load (A) Rated voltage (V) Resistive load Lamp load Inductive load Motor load Built-in Switch NC NO NC NO NC NO NC NO 125 VAC 15 3 1.5 15 5 2.5 200 VAC 15 2.5 1.25 15 3 1.5 500 VAC 10 1.5 0.75 6 1.5 0.75 8 VDC 15 3 1.5 15 5 2.5 Z-15G5-B 14 VDC 15 3 1.5 10 5 2.5 30 VDC 6 3 1.5 5 5 2.5 125 VDC 0.5 0.5 0.5 0.05 0.05 0.05 250 VDC 0.25 0.25 0.25 0.03 0.03 0.03 Note: 1. The above values are for steady-state currents. 2. Inductive load: Power factor = 0.4 (AC) time constant = 7 ms (DC). 3. The lamp load has an inrush current of 10 times the steady-state current. 4. The motor load has an inrush current of 6 times the steady-state current. 5. Standard testing condition. (1) Ambient temperature: 20 2C (2) Ambient humidity: 65% 5%RH (3) Operating frequency: 20 times/min 1ZAP Specifications Characteristics Operating Characteristics Operat- Mechanical 60 operations/min Model ZAP- 2ZAP- ing fre- Operating characteristics Electrical 20 operations/min quency Approx. 5.88 to Approx. 9.81 to Operating force OF Insulation resistance 100 M min. (at 500 VDC) 14.71 N 17.70 N Contact resistance 30 m max. (initial value) Note: Operating force may vary depending on thickness of mounting panel. Between terminals of same 1,000 VAC, 50/60 Hz for 1 min polarity Contact Form Dielectric Between current-carrying metal part strength Name Contact form 2,000 VAC, 50/60 Hz for and ground, and between each termi- 1 minute NC nal and non-current-carrying metal part Double-throw contacts COM NO Vibra- 10 to 55 Hz, 1.5-mm double tion re- Malfunction amplitude (1 ms max.) sistance Approved Safety Standards 2 Destruction 500 m/s Shock re- The built-in Z-15G5-B Switch is approved for UL and CSA. 2 sistance Malfunction 200 m/s max. (1 ms max.) Mechanical 1,000,000 operations min. Durabili- ty Electrical 500,000 operations min. Weight Approx. 130 to 210 g NC 30 A max. Inrush current NO 15 A max. 25 to 80C (with no icing or Ambient operating temperature condensation) Ambient operating humidity 35% to 85%RH 25 to 80C (with no icing or Ambient storage temperature condensation) Degree of protection IP65 (Operation Unit only) Electric shock protection class Class II PTI (proof tracking index) 175 Pollution degree 3 (IEC947-5-1) Dimensions Insert one of the following letters into the box ( ) at the end of the model number. Refer to Ordering Information for color symbols. (Unit: mm) Mounting panel thickness: ZAP- 1.6 to 6 mm ZAP- 2ZAP- Z-15G5-B Basic Switch Rubber packing 2ZAP- Washer 26 24.6 36 dia. 25 dia. 25 dia. 49.2 52 24.6 26 37 * 9.75 43.5 19 51.8 max. Three, M4 5.5 10.8 t Terminal screws 40 dia. (with toothed washer) * Chromed plating ZAP-1 ZAP-2 2ZAP-1 2ZAP-2 40 dia. 36 dia. 36 dia. 25 dia. Mounting panel thickness: * * Mounting panel thickness: 1.6 to 6 mm 1.6 to 6 mm t t 27.6 15.8 * Chromed plating * Chromed plating 2