Switching Mode Power Supply ZEN-PA03024 CSM ZEN-PA03024 DS E 3 1 New Compact Power Supply (30 W) for ZEN Programmable Relays Slim size with a depth of 56 mm (W H D: 70 90 56 mm). EMI: Conforms to EN61000-6-3 (Class B). Allows parallel operation. Safety standards: UL 508/UL60950-1/UL1604, CSA C22.2 No. 14/No.60950-1/ No.213 (Evaluated by UL), EN60950-1 (VDE 0805 Teil 1), EN50178 (VDE0160) Output voltage: 24 VDC Output current: 1.3 A Capacity: 30 W Uses lead-free soldering. Refer to Safety Precautions on page 6 Model Number Structure Model Number Legend ZEN-PA 030 24 12 3 1. Unit PA: Power supply unit 2. Power Ratings 030: 30 W 3. Output voltage 24: 24 V Ordering Information List of Models Power ratings Input voltage Output voltage Output current Model number 30 W 100 to 240 VAC 24 VDC 1.3 A ZEN-PA03024 Accessories (Order Separately) Name Models Mounting Track 50 cm (l) 7.3 mm (t) PFP-50N 1 m (l) 7.3 mm (t) PFP-100N 1 m (l) 16 mm (t) PFP-100N2 End Plate PFP-M Spacer PFP-S 1ZEN-PA03024 Specifications Ratings/Characteristics Efficiency (typical) 80% min. Input Voltage 100 to 240 VAC (85 to 264 VAC), 95 to 350 VDC (See note 1.) Frequency 50/60 Hz (47 to 450 Hz) Current 100 VAC input 0.8 A max. 200 VAC input 0.45 A max. Leakage current 100 VAC input 0.4 mA max. 200 VAC input 0.75 mA max. Inrush current (See note 2.) 100 VAC input 25 A max. 200 VAC input 50 A max. Output Voltage adjustment range (See note 3.) 10 to 15% (with V.ADJ) of rated output voltage Ripple 2% (p-p) max. (25 to 10C: 4% max.) Input variation influence 0.5% max. Load variation influence (rated input voltage) 1.5% max. Temperature variation influence 0.05%/C max. Start up time (See note 2.) 1,000 ms max. (100 VAC or 200 VAC, at rated output voltage) Hold time (See note 2.) 15 ms min., 20 ms (typical) (100 VAC or 200 VAC, at rated output voltage) Additional Overload protection (See note 2.) 105% to 135% of rated load current, inverted L drop, intermittent, automatic reset functions Parallel operation Yes (2 units max. For details, refer to the derating curve in Engineering Data on page 4. For DC input, parallel operation is possible only for 110 to 350 VDC.) Series operation No Others Ambient temperature Operating: Refer to the derating curve in Engineering Data on page 4. (with no icing or condensation) Storage: 25 to 75C (with no icing or condensation) Ambient humidity Operating: 10 to 90% Storage: 10 to 90% Mounting method DIN track mounting, surface mounting Dielectric strength 2.0 kVAC for 1 min. (between all inputs and exposed non-current-carrying metal parts detection current: 10 mA max.) 3.0 kVAC for 1 min. (between all inputs and all outputs detection current: 20 mA max.) 1.0 kVAC for 1 min. (between all outputs and non-current-carrying metal parts detection current: 10 mA max.) Insulation resistance 100 M min. (between all outputs and all inputs/exposed non-current-carrying metal parts) at 500 VDC Vibration resistance 10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z direction 2 Shock resistance , 3 times each in X, Y, Z directions 300 m/s Output indicator Yes (color: green) EMI Conducted Conforms to EN61000-6-3 (Class B) emissions Radiated Conforms to EN61000-6-3 (Class B) emissions Approved standards UL: UL508 (listing, Class 2: Per UL1310), UL60950-1, UL1604 (Class I/Division 2) cUL: CSA C22.2 No. 14 (listing, Class2: Per CSA C22.2 No. 223), CSA C22.2 No. 213 (Class I/Division 2) cUR: CSA C22.2 No.60950-1 EN/VDE: EN60950-1 (=VDE 0805 Teil 1), EN50178 (=VDE 0160) Weight 240 g max. Note: 1. This product has been approved for safety standards only when an AC input is used. It has not been approved when a DC input is used. 2. Refer to the Engineering Data section on page 4 for details. 3. If the V. ADJ adjuster is turned, the voltage will increase by more than 15% of the voltage adjustment range. Check the output voltage of the power supply when converting the output voltage, and make sure that the load will not be damaged. 2