Smart Sensors (Inductive Displacement Type) ZX-E Series High-accuracy Detection of Met- al Workpiece Displacement Sensor Heads support a wide variety of applications. Linearity can be adjusted for non-ferrous metals, such as SUS and aluminum, using the material selection function. Simple linearity compensation (teaching). Easily perform calculation for two Sensors by using a Calculating Unit. Prevent mutual interference for up to five Units by using a Calculating Unit For the most recent information on models that have been certified for safety standards, refer to your OMRON website Ordering Information Sensors Sensor Heads (Refer to Dimensions on page 11.) Shape Dimensions Sensing distance Resolution *1 Model Cylindrical 3 dia. x 18 mm 0.5 mm 1 m ZX-EDR5T 5.4 dia. x 18 mm 1 mm ZX-ED01T *2 8 dia. x 22 mm 2 mm ZX-ED02T *2 Screw-shaped M10 x 22 mm ZX-EM02T *2 M18 x 46.3 mm 7 mm ZX-EM07MT *2 Flat 30 x 14 x 4.8 mm 4 mm ZX-EV04T *2 *3 Heat-resistant, cylindrical M12 x 22 mm 2 mm ZX-EM02HT *4 *1: For an average count of 4,096. *2: Models with Protective Spiral Tubes are also available. Add a suffix of -S to the above model numbers when ordering. (Example: ZX-ED01T-S) As for ZX-EM07MT, please mention ZX-EM07M-S when ordering. For detailed dimensions of the Protective Spiral Tube, refer to the information on the E39-F32A on the OMRON website. *3: Be sure to use ZX-EDA Amplifier Unit version 1,200 or later with the ZX-EV04T. *4: Be sure to use ZX-EDA Amplifier Unit version 1,300 or later with the ZX-EM02HT. Amplifier Units (Refer to Dimensions on page 13.) Appearance Power supply Output type Model DC NPN ZX-EDA11 2M PNP ZX-EDA41 2M Note: Compatible connection with the Sensor Head. ZX-E Series Smart Sensors (Inductive Displacement Type) 1Accessories (Order Separately) Calculating Unit (Refer to Dimensions on page 14.) Setup Tool for Personal Computer Appearance Model Appearance Name Model ZX-CAL2 Communications Interface ZX-SFW11EV3 Unit (RS-232C) + Smart (See note 1.) + Monitor Basic*2 (Function Setting Software) Note 1. The ZX-SFW11EV3 or ZX-SW11EV3 is required to use the Smart Monitor with the ZX-LDA11-N/41-N. Earlier versions Amplifier Mounting Brackets cannot be used. A ZX-XBE1 is provided with the Sensor. Order an 2. The Smart Monitor Basic does not have a logging function. Amplifier Mounting Bracket separately if required. Other than the logging function, the Smart Monitor Basic sup- ports the same functions as the Smart Monitor. (Refer to Dimensions on page 14.) Cables with Connectors on Both Ends (for Appearance Model Remarks Extension) (Refer to Dimensions on page 15.)* ZX-XBE1 Attached to each Sensor Cable length Model Quantity Head 1 m ZX-XC1A 1 4 m ZX-XC4A ZX-XBE2 For DIN track 8 m ZX-XC8A mounting * Robot cable models are also available. The model numbers are ZX-XC R. Logging Tool for Personal Computers Bank Unit (Refer to Dimensions on page 15.) Appearance Model Appearance Name Model ZX-SB11 Communications Interface Unit ZX-SF11 (RS-232C) Smart Monitor (Logging Soft- ZX-SW11EV3 ware + Function Setting Soft- (See note 1.) ware) Specifications Sensor Heads Model ZX-EDR5T ZX-ED01T ZX-ED02T/ ZX-EM07MT ZX-EV04T ZX-EM02HT EM02T Measurement range 0 to 0.5 mm 0 to 1 mm 0 to 2 mm 0 to 7 mm 0 to 4 mm 0 to 2 mm Sensing object Magnetic metals (Measurement ranges and linearities are different for non-magnetic metals. Refer to En- gineering Data on page 4.) Standard reference object 18183 mm 30303 mm 60603 mm 45453 mm Material: ferrous (S50C) Resolution *1 1 m Linearity *2 0.5% F.S. 1.0% F.S. *5 Linear output range Same as measurement range. Temperature characteristic *3 0.15% F.S./C 0.07% F.S./C0.1% F.S./C (including Amplifier Unit) Operating *4 Ambient 0 to 50C (with no ic- 10 to 60C (with no icing or condensation) 10 to 200C temperature ing or condensation) Storage *4 20 to 70C (with no icing or condensation) (with no icing or condensation) Ambient humidity Operating and storage: 35% to 85% (with no condensation) Insulation resistance 50 M min. (at 500 DC) Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between charged parts and case Vibration resistance (destruction) 10 to 55 Hz with 1.5-mm double amplitude for 2 h each in X, Y, and Z directions 2 Shock resistance (destruction) 500 m/s , 3 times each in X, Y, and Z directions Degree of protection (Sensor Head) IEC60529, IP65 IEC60529, IP67 IEC60529, IP60 *6 Connection method Connector relay (standard cable length: 2 m) Weight (packed state) Approx. 120 g Approx. 140 g Approx. 160 g Approx. 130 g Approx. 160 g Sensor Case Materials Brass Stainless steel Brass Zinc (nickel-plated) Brass Head Sensing surface Heat-resistant ABS PEEK Tightening nut --- --- Brass (nickel-plated) (except ZX-ED02T) Brass (nickel-plated) Toothed washer --- --- Iron (zinc-plated) (except ZX-ED02T) Iron (zinc-plated) Preamplifier PES Accessories Amplifier Mounting Brackets (ZX-XBE1), Instruction Manual 2 ZX-E Series Smart Sensors (Inductive Displacement Type)