OAC5Q Opto 22

DATA SHEET Quad Pak AC Output Module Form 486-120120 Quad Pak AC Output Module Features Contains four, single channel I/O circuits. Each module can be divided into two pairs with each pair sharing a common connection. used for controlling or switching AC loads. Provides up to 4,000 Vrms of optical isolation between the field devices and the control logic. Features zero voltage turn-on and zero current turn-off OAC5Q Description Quad Pak modules contain the equivalent of four, single channel I/O circuits in a single high-density package. Each Quad Pak module can be divided into two pairs with each pair sharing a common connection. The Quad Pak modules are designed to plug into the Quad Pak high-density I/O mounting racks only and cannot be plugged into single channel racks. Quad Pak modules are designed to work with a 5 VDC logic voltage only and can be used with Optomux, Pamux, and Mistic protocol brain boards and mounting racks as well as racks using a direct cable connection to a computer. AC output modules are used for controlling or switching AC loads. Each module provides up to 4,000 Vrms of optical isolation between the field devices and the control logic. The Quad Pak AC output module features zero voltage turn-on and zero current turn-off. Typical uses and applications for AC output modules include switching the following loads: Relays Solenoids and Contactors Motor Starters Heaters Lamps or Indicators Part Numbers Part Description OAC5Q 4-Channel AC Output 12-280 VAC, 5 VDC Logic Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 1 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.Quad Pak AC Output Module Specifications Line VoltageNominal 120/240 VAC Operating Voltage Range 12280 VAC Current Rating 20 C Ambient 3 amps 2 amps 45 C Ambient One Cycle Surge 80 amps Logic VoltageNominal 5 VDC Logic Voltage Range (Vcc) 48 VDC Logic Pickup Voltage 4.0 VDC Logic Dropout Voltage 2.3 VDC Logic Input Current Nominal Logic Voltage 12 mA (lout in Schematic Diagram) Control Resistance (Rc in Sche- 220 ohms matic Diagram) Peak Repetitve Voltage 500 volts Operating Ambient Temperature -30 to 70 C Isolation Input-to-Output 4,000 Vrms Minimum Load Current 20 milliamps Operating Frequency 2565 Hz Turn-on Time 1/2 cycle maximum-zero voltage Turn-off Time 1/2 cycle maximum-zero current DV/DT-Off-state snubbed for rated 0.5 power factor load Output VOltage Drop Maximum 1.6 volts Peak Off-state Leakage 5 milliamps, ms Nominal Voltage-60Hz Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 2 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Quad Pak AC Output Module Form 486-120120