DATA SHEET Digital I/O for Raspberry Pi Starter Kit Form 2210-170111 Digital I/O for Raspberry Pi Starter Kit Features Perfect for prototyping, proofs of concept, and environments where an industrially hardened controller isnt required Provides a reliable way to sense and switch industrial- level electrical loads with your own Raspberry Pi Includes Digital I/O Carrier Board, mounting rack, OPTO-P1-40P and four popular G4 I/O modules Code samples available at developer.opto22.com Room to Expand Description The Starter Kit gives you plenty of room to expand. You can add up to 4 additional I/O modules on the mounting rack Use your Raspberry Pi in the real world (choose from the list of compatible G4 modules). Available only for a limited time, the Digital I/O for Raspberry Pi In addition, the Carrier Boards auxiliary 40-pin GPIO connector Starter Kit gets you started sensing and switching industrial lets other Pi-compatible peripherals access the Pis unused loads with your own Raspberry Pi. pins. The system includes the same field-tested, industrially hardened Opto 22 G4 input/output (I/O) modules used in Read and Write with Pi automation applications worldwide for nearly 40 years. Just bring your Pi and its power supply, and youre ready to begin. Its easy to read and write to Opto 22 I/O points using your favorite Pi-supported languagePython, Node-RED, Pi The kit includes all of the following: Terminal, Pi Filesystem GPIO, or others. OPTO-P1-40P Digital I/O Carrier Board, including interface Visit developer.opto22.com for code samples and tips for cable, Pi board mounting standoffs, and spare fuse for using your Pi to read and write to Opto 22 I/O modules. mounting rack G4PB8H 8-module mounting rack G4IAC5 90-140 VAC/VDC input module Heres What You Need G4IDC5MA 10-32 VDC input module with manual/auto Digital I/O for Raspberry Pi Starter Kit Switch Raspberry Pi (any model with a 40-pin GPIO header G4OAC5 12-140 VAC output module connector, including Raspberry Pi Models A+ and B+, Pi 2 G4ODC5 5-60 VDC output module Model B, Pi 3 Model B, and Pi Zero) Power supply With the Starter Kit, you can use your Pi to switch industrial- level electrical loads far beyond the Pi s built-in 3.3 VDC GPIO pins. You can monitor and control real-world devices like industrial motors, pumps, and sensors. And youll know that you can count on reliable Opto 22 Part Number industrial I/O, manufactured and supported in the U.S.A. Part De scripti on Product support is free, and most I/O modules are guaranteed for life. Digital I/O for Raspberry Pi OPTO-P1-STARTERKIT-1 Starter Kit, AC/DC Raspberry Pi is a trademark of the Raspberry Pi Foundation. Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 1 20162017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.Digital I/O for Raspberry Pi Starter Kit Getting Started The Starter Kit works with any model Pi with a 40-pin header connector. Heres whats in the box: Small parts G4 I/O modules 5. Remove an I/O module from its box and carefully install it in position 0 on the board. Secure it with its integral screw. Interface cable Carrier Board G4 mounting rack 1. Snap the Carrier Board onto the G4 mounting rack connector. 2. Carefully open the bag of small parts. Standoffs Fuse Screws 6. Install and secure the other 3 modules next to the first one. Terminal strip for wiring 3. Use the four screws to secure the Pi to the top of the Carrier Board, placing a standoff between the Pi and the Board for each screw. 4. Insert one end of the interface cable into your Pi s GPIO connector. Insert the other end into the Carrier Boards 7. Follow Field Wiring Diagrams on page 4 to wire real- gray connector, making sure it locks in place. world sensors and devices to the mounting rack. CAUTION: AC wiring is dangerous and should be done by a qualified electrician. For additional wiring information and complete specifications, see the Digital I/O for Raspberry Pi Selection Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 2 20162017 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Digital I/O for Raspberry Pi Starter Kit Form 2210-170111