DATA SHEET SNAP Digital Output Modules Form 1144-150109 SNAP Digital Output Modules Features Four channels per module Convenient pluggable wiring terminals accepts 22 to 14 AWG wire Powered by a single 5-volt supply Channel-specific LEDs Operating temperature: -20 to 70 C SNAP Digital Output Modules UL and CE approved (most modules) Factory Mutual approved (part numbers ending in FM) Description Opto 22 SNAP I/O digital output modules are part of the SNAP can quickly check field device wiring. These modules each PAC System. contain four isolated channels. Choose from AC or DC models. Optical isolation on all solid- The SNAP-OAC5-i, SNAP-ODC5-i, and SNAP-ODC5A-i modules state modules provides 4,000 volts of transient (4000 V for provide four isolated output channels. 1 ms) protection for sensitive control Part Numbers electronics from industrial field signals. See Part Description pages Most SNAP digital modules have SNAP-OAC5 SNAP 4-channel 12250 VAC output, 5 VDC logic 3, 5 removable top-mounted connectors to provide easy access for field wiring. SNAP 4-channel isolated 12250 VAC output, 5 VDC logic SNAP-OAC5MA 3, 6 with manual/auto switches All operate on 5 VDC control logic. Each digital module features integral SNAP-OAC5FM SNAP 4-channel 12250 VAC output, 5 VDC logic 4, 5 channel-specific LEDs for convenient SNAP-OAC5-i SNAP 4-channel isolated 12250 VAC output, 5 VDC logic 3, 7 troubleshooting and maintenance. SNAP-OAC5-iFM SNAP 4-channel isolated 12250 VAC output, 5 VDC logic 4, 7 Each module is factory tested twice SNAP-ODC5SRC SNAP 4-channel 560 VDC output, 5 VDC logic source 8, 12 before shipment, and most modules SNAP-ODC5SRCFM SNAP 4-channel 560 VDC output, 5 VDC logic source 10, 12 are UL and CE approved. In addition, SNAP-ODC5SNK SNAP 4-channel 560 VDC output, 5 VDC logic sink 8, 13 part numbers ending in FM are Factory Mutual approved. SNAP-ODC5SNKFM SNAP 4-channel 560 VDC output, 5 VDC logic sink 10, 13 SNAP-ODC5ASNK SNAP 4-channel 5200 VDC output, 5 VDC logic sink 9, 13 SNAP output modules are used to switch up to four separate AC or DC SNAP 4-channel isolated 560 VDC output, 5 VDC logic SNAP-ODC5MA 9, 14 loads. Output modules that are fused with manual/auto switches use a standard fuse with a convenient SNAP-ODC5-i SNAP 4-channel isolated 560 VDC output, 5 VDC logic 9, 15 handle for easy replacement. DC SNAP-ODC5-iFM SNAP 4-channel isolated 560 VDC output, 5 VDC logic 11, 15 outputs are available in either a source SNAP-ODC5A-i SNAP 4-channel isolated 5200 VDC output, 5 VDC logic 9, 15 or sink configuration. AC outputs are zero voltage turn on and zero current SNAP-ODC5A-iFM SNAP 4-channel isolated 5200 VDC output, 5 VDC logic 11, 15 turn off for transient-free switching. SNAP-RETN4 SNAP 4-module retention rail (OEM) -------- SNAP-OAC5MA and SNAP-ODC5MA SNAP-RETN4B SNAP 4-module retention rail, 25-pack (OEM) -------- are special modules featuring manual- SNAP-RETN6 SNAP 6-module retention rail (OEM) -------- on/manual-off/automatic switches, SNAP-RETN6B SNAP 6-module retention rail, 25-pack (OEM) -------- ideal for diagnostic testing of control SNAP-FUSE4AB SNAP 4-amp fuse, 25-pack -------- applications. The switches override output from the application, so you SNAP-MODFUSEH SNAP digital output module fuse holder, 10-pack -------- Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 1 19992015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.SNAP Digital Output Modules For Ethernet-based applications requiring higher density of Module Module connectors digital I/O points, see Opto 22 form 1556, the SNAP High- Processor connector position zero Retention bar Density Digital Module Data Sheet. I/O Processor Compatibility SNAP digital output modules are compatible with all SNAP PAC brains and rack-mounted controllers, including both standard wired models and Wired+Wireless models. Notes for legacy hardware: SNAP digital output modules are also compatible with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, as well as other SNAP brains such as the serial B3000 and the B3000HA. These modules can also be 1. Place the rack so that the module connector numbers used on B-series and M-series mounting racks. are right-side up, with zero on the left, as shown in the diagram above. (If your rack has screw connectors, the screw connectors will be at the bottom.) Installation 2. Position the module over the module connector, The following diagram shows part of a SNAP mounting rack. aligning the small slot at the base of the module with The rack is shown without screw connectors. the retention bar on the rack. When positioning modules next to each other, be sure to align the male and female Modules snap securely into place in the row of connectors on module keys at the tops of the modules before snapping the rack. Each module connector has a number. Digital output a module into position. modules and other types of SNAP I/O modules are mounted on the module connectors starting at module position zero. 3. With the module correctly aligned, push on the module to snap it into place. NOTE: Check the data sheet or users guide for the brain or on- 4. (Optional) Use standard 4-40 x 1/2 truss-head Phillips the-rack controller you are using to determine module hold-down screws to secure both sides of each module. features available and any restrictions on module placement. CAUTION: Do not over-tighten screws. 5. Follow the wiring diagrams beginning on page 5 to attach modules to the devices they monitor. Modules require a special tool (provided) for removal. Opto 22 43044 Business Park Drive Temecula, CA 92590-3614 www.opto22.com PAGE SALES 800-321-6786 951-695-3000 FAX 951-695-3095 sales opto22.com SUPPORT 800-835-6786 951-695-3080 FAX 951-695-3017 support opto22.com 2 19992015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET SNAP Digital Output Modules Form 1144-150109