FibreFab GB6198 Fibre Optic & Networking Products OM3 Fibre Patch Cords OM3 optical fibre systems are the pinnacle of multimode fibre design. To utilise the new 10Gbs Ethernet protocols in an optical fibre system requires either a full blown singlemode solution or OM3 50/125 multimode fibre. The OM3 system allows for new VCSEL based hardware and old legacy LED based hardware to co-exist over your system. For the hard pressed IT manager an OM3 optical fibre solution will give a simple migration path through 1Gbs to 10Gbs and have security knowing the system they are installing today will give many years of solid, secure service to their network. The FibreFab OM3 patch cord utilises the best cable available along with the market leading Optronics connectors. Manufactured in FibreFabs ISO 9001 approved manufacturing facility these cables can be relied upon, even with in the most mission critical systems. FibreFab has 15 years experience inmanufacturing fibre optic cable assemblies. If you have a fibre network, no matter what the technology, FibreFab can offer you a solution to your problem. Optical Fibre patch cords are a defining factor in ensuring your network performs to the highest level, with a FibreFab patch cord you can be confident you are using the very best in cable, connectors and manufacturing. Tyco AMP approved UK Multimode & Singlemode manufacturing facility applications ST/SC/FC/LC/E2000/ MU Connector types Fast turn around of non-standard requirements Ultra polish & Angle polish options available all terminations Full tracability & test certification are manufactured to exceed supplied with each assembly performance parameters set by industry standards FibreFab Fibre Optic & Networking Products Specifications Optical fibre and cable performance Patchcord Specification Attenuation (dB/km) Mechanical (850/1300) 2.8/0.8 Length: 1m to 10m 10mm Other lengths available to order Bandwidth (MHz.Km) (850/1300) 1500/500 Split Length (Duplex): 150mm 5mm Sheath colour Product Packaging Purple Each patch cord is packaged individually and individually identified for traceability, Strength Members test certification is supplied for each Aramid strength members Fire Performance LSZH for Internal/External Applications Flame Resistance IEC 60332-1 Connector Specification Optical Performance (Multimode) Insertion loss: Max. 0.3 dB Typical 0.2 dB Optical Performance (MT-RJ) Insertion loss: Max. 0.5 dB Operating Temperature -40C to +85C Intermateability Optically and mechanically compatible with all equivalent connectors. Compliant with IEC 874-14. For full information on the Optronics connectors used on the FibreFab patch cords, please contact the address below for a connector data sheet. Ordering Information Fibre Connectors Cable Connectors Cable Length (m) 1 1 2 3 Size Colour End 1 End 2 Configuration OR 50 FC FC/APC SC 1m SC/APC S = Simplex 2m ST D = Duplex 3m LC 5m MT-RJ 1 MU Other Connectors Available on Request 10m 2 E2000 Singlemode cable only available in Yellow 3 MT-RJ is only available in MiniZip FibreFab Limited Davy Avenue Tel: +44 (0) 870 127 3330 Knowlhill Fax: +44 (0) 870 127 3331 Milton Keynes Email: sales fibrefab.com MK5 8ND Internet: www.fibrefab.com FibreFab Ltd is registered in England no. 2734823. Copyright FibreFab 2005. All Rights Reserved.