P. 1 Technical Data Sheet Plastic Gear Analog Servo Part No. LS-3006 1. Apply Environmental Condition No. Item Specification 1-1 Storage Temperature Range -20C - 60C 1-2 Operating Temperature Range -10C - 50C 1-3 Operating Voltage Range 4.5V - 6.0V 2. Standard Test Environment No. Item Specification 2-1 Standard Test Environment Any test must be under normal temperature and humidity. Temperature:25 5C Humidity: 65 10%, according to the standard to judge. 3. Appearance Inspection No. Item Specification 3-1 Outline Drawing 40.8*20.1*38 4. Electrical Specification (Function of the Performance) No. Item 4.8V 6.0V 4-1 Operating speed (at no load) 0.14 sec / 60 0.12 sec / 60 4-2 Running current (at no load) 250 mA 300 mA 4-3 Stall torque (at locked) 5.5 kg - cm, 6 kg - cm 4-4 Stall current (at locked) 1.3 A 1.5 A 4-5 Idle current (at stopped) 4 mA 5 mA Leo Sales Ltd. Richmond, BC, Canada support leosales.comP. 2 5. Mechanical Specification No. Item Specification 5-1 Overall Dimensions 40.8*20.1*38 5-2 Limit angle 180 10 5-3 Weight 40 1 g 5-4 Connector wire gauge 28 PVC 5-5 Connector wire length 300 5 mm 5-6 Horn gear spline 25T/ 5.80 5-7 Horn type Cross, disc, HX HEX, Type aticle 5-8 Reduction ratio 240 1 6. Control Specification No. Item Specification 6-1 Control system Change pulse width 6-2 Amplifier type Analog control 6-3 Operating travel 360 (at 1000 2000 sec) 6-4 Neutral position 1500 sec 6-5 Dead band width 4 sec 6-6 Rotating direction anticlockwise (at 1500 2000 sec) 6-7 Pulse width range 800 2200 sec 6-8 Maximum travel About 165(at 800 2200 sec) 48.2 38 20.1 10 40.8 Leo Sales Ltd. Richmond, BC, Canada support leosales.com