ROCKER SWITCHES K1/K2 SNAP-IN SEALED, ILLUMINATED ROCKER SWITCHES ROCKERS LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. The K1 and K2 series are sealed to IP68S and IP69K and panel sealed with an optional panel gasket. The K1 series is offered in single pole configuration and the K2 series is available in both single and double pole configurations. K1 Series Both series offer illuminated models. Illumination can be Single Pole independent or dependent of the switch position or a combination of both. A choice of red, green, clear or amber colored lenses are offered in illuminated models. Illumination options include incandescent, LED or neon light sources. Mounting is simple and quick snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cutout size. A choice of models are offered to handle high power levels and logic level electronic switching applications. K2 Series Custom colors are available upon request. Value-added Single & Double Pole assemblies with wire leads are also available. Please contact our CUS factory for assistance. Standard Characteristics/Ratings: Features: ELECTRICAL RATINGS: Load Sea Level Sea Level Cycles Sealed to IP68S and IP69K 28VDC 125/250 VAC, Fits industry standard panel openings for drop-in 60/400Hz replacement of panel sealed & unsealed switches Resistive 16A 5A 25,000 Resistive 10A N/A 50,000 Snap-in feature accommodates a wide range of Inductive 7A 2A 25,000 panel cutouts DWV 1000Vrms except across light terminals UV & solvent resistant Logic Level 10mA 5VDC, max D.C. logic level ratings (void if logic level load(s) exceeded at any time) Withstands extreme shock & vibration Electrical Life: See Rating Chart Custom legends available LIGHTING: 2 & 3-position, momentary & maintained action Light Source Rating (see appendix for complete voltage/current Incandescent, LED & neon illumination with ratings table) independent & dependent light source options Incandescent (VDC) 6V, 12V, 24V UL recognized & CSA certified Neon (VAC) 125V, 250V LED (VDC) 2V, 6V, 12V, 24V Ignition protected Mechanical Life: 100,000 cycles Optional one-piece connector Seal: IP68S and IP69K Optional panel gasket available Operating Temp Range: -30C to +85C RoHS compliant MATERIALS: Case: Thermoplastic Button: Thermoplastic Base: Thermoplastic Terminals/Contact: Brass, silver alloy with silver plate, gold flash for logic level Terminal Hardware: Screws and lockwashers provided when applicable K1/K2 series recommended Quick Connect terminals: AMP 60253-2 for 12-16 AWG AMP 42100-2 for 14-18 AWG Mounting Hardware: None provided Specifications Subject To Change Without Notice www.ottoexcellence.com 193K1 SNAP-IN ROCKERS SEALED, ILLUMINATED ROCKER SWITCHES LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS K1 PART NUMBER CODE Part Number Code Continued Below K1 X X X X Terminal Style/ Actuator Color/Style Light Type* Switch Action/Circuit Switch Rating A. Red/Rocker A. No Light Position Position Position Circuit A. Q.C./Std. B. Black/Rocker B. 6V Incandescent A B C B. Screw/Std. C. White/Rocker C. 12V Incandescent A. 1-C NONE OFF SPST C. Solder/Std. D. Red/Paddle D. 24V Incandescent B. 1-C NONE 2-C SPDT D. Q.C./Logic Level E. Black/Paddle E. 125VAC Neon C. (1-C) NONE OFF SPST E. Screw/Logic Level F. White/Paddle D. F. 250VAC Neon (1-C) NONE 2-C SPDT F. Solder/Logic Level E. G. Red/Rocker Pinned (1-C) OFF (2-C) SPDT G. 2V Red LED F. G. PC Pin/Std. 1-C OFF 2-C SPDT H. Black/Rocker Pinned H. 2V Green LED G. (1-C) OFF 2-C SPDT H. PC Pin/Logic Level J. White/Rocker Pinned J. 2V Amber LED H. OFF NONE 2-C SPST K. Red/Short Paddle Pinned K. 6V Red LED L. Black/Short Paddle Pinned NOTE: ( ) denotes momentary action. L. 6V Green LED M. White/Short Paddle Pinned M. 6V Amber LED Position A Position B Position C N. Red/Standard Paddle Pinned N. 12V Red LED P. Black/Standard Paddle Pinned P. 12V Green LED R. White/Standard Paddle Pinned Q. 12V Amber LED T. Red/Short Paddle R. 24V Red LED U. Black/Short Paddle S. 24V Green LED V. White/Short Paddle T. 24V Amber LED *See appendix for complete voltage/ratings table K1 PART NUMBER CODE CONTINUED FROM ABOVE K1 Continued X X X X Lens Color Light/Circuit Location Legend & Orientation Position A Position C A. No Light A. None A. No Lens A. No Lens B. F. B. C. B. Red B. Red C. Green C. Green Dependent Light D. Amber D. Amber Dependent Light D. E. ON in position A ON in position A Wired to terms 1 & 3 E. Clear E. Clear Wired to terms 1 & 3 Dependent Light ON in position C C. Wired to terms 2 & 4 G. Dependent Light F. G. ON in position C Wired to terms 2 & 4 Dependent Light D. ON in position A Wired to terms 1 & 3 H. J. Independent Light ON in position C Wired to terms 3 & 4 Independent Light at position A Wired to terms 3 & 4 H. NOTES: E. No momentary switches with dependent lights. L. K. Neon lamps only to be coded with clear or amber Independent Light at position A lenses. Wired to terms 3 & 4 Independent Light LED lenses must be clear or same color as LED. Dependent Light at position C ON in position C Wired to terms 3 & 4 M. N. No dependent light in OFF position. Wired to terms 2 & 4 All legends printed on actuators without lens(es) D = Dependent Light will be white except actuator codes C, F, J, M & R. I = Independent Light All legends printed on lenses will be white except NOTES: on clear lens(es) will be black. LED anode (+) terminal number shown in bold. P. R. Light on OFF side must be independent. Contact factory for multiple light types in the K1 panel plugs available as shown in same switch. Panel Plugs (PP) section. 194 OTTO Full Line Catalog Specifications Subject To Change Without Notice