ROCKER SWITCHES K1/K2 SNAP-IN SEALED, ILLUMINATED ROCKER SWITCHES ROCKERS LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. The K1 and K2 series are sealed to IP68S and IP69K and panel sealed with an optional panel gasket. The K1 series is offered in single pole configuration and the K2 series is available in both single and double pole configurations. K1 Series Both series offer illuminated models. Illumination can be Single Pole independent or dependent of the switch position or a combination of both. A choice of red, green, clear or amber colored lenses are offered in illuminated models. Illumination options include incandescent, LED or neon light sources. Mounting is simple and quick snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cutout size. A choice of models are offered to handle high power levels and logic level electronic switching applications. K2 Series Custom colors are available upon request. Value-added Single & Double Pole assemblies with wire leads are also available. Please contact our CUS factory for assistance. Standard Characteristics/Ratings: Features: ELECTRICAL RATINGS: Load Sea Level Sea Level Cycles Sealed to IP68S and IP69K 28VDC 125/250 VAC, Fits industry standard panel openings for drop-in 60/400Hz replacement of panel sealed & unsealed switches Resistive 16A 5A 25,000 Resistive 10A N/A 50,000 Snap-in feature accommodates a wide range of Inductive 7A 2A 25,000 panel cutouts DWV 1000Vrms except across light terminals UV & solvent resistant Logic Level 10mA 5VDC, max D.C. logic level ratings (void if logic level load(s) exceeded at any time) Withstands extreme shock & vibration Electrical Life: See Rating Chart Custom legends available LIGHTING: 2 & 3-position, momentary & maintained action Light Source Rating (see appendix for complete voltage/current Incandescent, LED & neon illumination with ratings table) independent & dependent light source options Incandescent (VDC) 6V, 12V, 24V UL recognized & CSA certified Neon (VAC) 125V, 250V LED (VDC) 2V, 6V, 12V, 24V Ignition protected Mechanical Life: 100,000 cycles Optional one-piece connector Seal: IP68S and IP69K Optional panel gasket available Operating Temp Range: -30C to +85C RoHS compliant MATERIALS: Case: Thermoplastic Button: Thermoplastic Base: Thermoplastic Terminals/Contact: Brass, silver alloy with silver plate, gold flash for logic level Terminal Hardware: Screws and lockwashers provided when applicable K1/K2 series recommended Quick Connect terminals: AMP 60253-2 for 12-16 AWG AMP 42100-2 for 14-18 AWG Mounting Hardware: None provided Specifications Subject To Change Without Notice www.ottoexcellence.com 193ROCKER SWITCHES K2 SNAP-IN SEALED, ILLUMINATED ROCKER SWITCHES ROCKERS LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES K2 PART NUMBER CODE Part Number Code Continued Below K2 X X X Switch Action/Circuit Terminal Style/ Actuator Color/Style Position Position Position Circuit Switch Rating A. Red Standard POSITION A B C A. Quick Connect/ B. Black Standard A. 1-C1 NONE OFF SPST Standard C. White Standard B. 1-C1 NONE 2-C1 SPDT B. Screw/Standard D. Red Standard Paddle C. (1-C1) NONE OFF SPST C. Solder/Standard E. Black Standard Paddle D. (1-C1) NONE 2-C1 SPDT F. White Standard Paddle D. Quick Connect/ E. (1-C1) OFF (2-C1) SPDT 2,4 C 1,3 Logic Level G. Red Short Paddle Pinned F. 1-C1 OFF 2-C1 SPDT G. (1-C1) OFF 2-C1 SPDT E. Screw/Logic Level H. Black Short Paddle Pinned POSITION H. 1-C1/3-C2 NONE OFF DPST F. Solder/Logic Level J. White Short Paddle Pinned J. 1-C1/3-C2 NONE 2-C1/4-C2 DPDT G. PC Pin/Standard K. Red Standard Paddle Pinned K. (1-C1)/(3-C2) NONE OFF DPST H. PC Pin/Logic Level L. Black Standard Paddle Pinned L. (1-C1)/(3-C2) NONE 2-C1/4-C2 DPDT M. White Standard Paddle Pinned M. (1-C1)/(3-C2) OFF (2-C1)/(4-C2) DPDT N. Red Standard Pinned N. 1-C1/3-C2 OFF 2-C1/4-C2 DPDT 2,4 C 1,3 P. Black Standard Pinned P. (1-C1)/(3-C2) OFF 2-C1/4-C2 DPDT R. White Standard Pinned POSITION Q. 1-C1 NONE (2-C1) SPDT R. OFF NONE (2-C1) SPST NOTE: For custom colors, contact factory. S. 1-C1/3-C2 NONE (2-C1)/(4-C2) DPDT T. OFF NONE (2-C1)/(4-C2) DPST U. 1-C1 OFF (2-C1) SPDT V. 1-C1/3-C2 OFF (2-C1)/(4-C2) DPDT 2,4 C 1,3 NOTE: ( ) denotes momentary action. K2 PART NUMBER CODE - CONTINUED FROM ABOVE X X X X X Light Type* Light/Circuit Location Legend & Orientation Lens Color A. No Light Position A Position C A. None A. No Light B. 6V Incandescent A. No Lens A. No Lens B. F. B. C. C. 12V Incandescent B. Red B. Red D. 24V Incandescent C. Green C. Green E. 125 VAC Neon D. Amber D. Amber Dependent Light Dependent Light ON in position A ON in position A E. D. F. 250 VAC Neon E. Clear E. Clear Wired to terms 1 & 7 Wired to terms 1 & 7 Dependent Light G. 2V Red LED ON in position C C. Wired to terms 2 & 8 H. 2V Green LED G. J. 2V Amber LED K. 6V Red LED Dependent Light ON in position C F. G. L. 6V Green LED Wired to terms 2 & 8 Dependent Light M. 6V Amber LED ON in position A D. Wired to terms 1 & 7 N. 12V Red LED Independent Light at position C J. H. P. 12V Green LED Wired to terms 8 & 7 Q. 12V Amber LED Independent Light H. at position A R. 24V Red LED Wired to terms 8 & 7 *See appendix for complete S. 24V Green LED voltage/ratings table E. T. 24V Amber LED Independent Light L. K. NOTES: ON in position A Wired to terms 7 & 8 No momentary switches with dependent lights. Dependent Light ON in position C Independent Light Neon lamps only to be coded with clear or amber lenses. at position C Wired to terms 2 & 8 LED lenses must be clear or same color as LED. Wired to terms 8 & 7 N. M. J. K2 connector P/N C801765. D = Dependent Light Recommended Quick Connect Terminals: I = Independent Light AMP 60253-2 for 12-16 AWG wire with 0.160 -0.210 insulation OD NOTES: AMP 42100-2 for 14-18 AWG wire with 0.100 -0.170 insulation OD Independent Light LED anode (+) terminal ON in position A No dependent light in OFF position. Wired to terms 7 & 3 number shown in bold. P. R. Independent Light All legends printed on actuators without lens(es) will be white Light on OFF side must be ON in position C except actuator codes C, F, J, M & R. Wired to terms 8 & 4 independent. Not available in DP All legends printed on lenses will be white except on clear Contact factory for multiple lens(es) will be black. light types in the same K2 panel plugs available as shown in Panel Plugs (PP) section. switch. Specifications Subject To Change Without Notice www.ottoexcellence.com 197