P5-311311 OTTO

P5 ALTERNATE ACTION ALTERNATE ACTION PUSHBUTTONS SEALED AGAINST DUST & MOISTURE The P5 Alternate Action switches match the P1, P3 and P8 Momentary Action Pushbutton models for mixed function with common panel appearance. Now you can design panels Style P5-4 with both alternate and momentary action switches and have uniform panel appearance. The P5 features alternate action in the same pushbutton and housing configuration as the momentary P1 and P3 and as a bonus, the P5 requires less Style P5-6 behind the panel space than the P1 and P3 momentary versions. Style P5-3 Push and the P5 switch turns on. Push again and the P5 switch turns off. Positive tactile feedback is featured so the operator is clearly aware the switch mode has been executed. The button returns to the original position after each actuation. To guard against front panel splash and dirt, the P5 series is sealed at the button with OTTOs patented rolling Style P5-1 sleeveprinciple. The terminals are sealed with epoxy, providing a seal against flux during wiring and behind panel dirt and moisture. The combination of sealing provides smooth operation over a wide temperature range. Watertight sealing to IP68S is available. A vandal resistant style is available in the P5-V series. Custom housings, shrouded buttons, contact configurations and Standard Characteristics/Ratings: materials are available to suit your application requirements. We ELECTRICAL RATINGS: also provide custom button engraving with epoxy ink backfill, Load Sea Level 28VDC watertight versions and other special characteristics. or 115VAC, 60/400Hz Resistive 10A Inductive 5A Features: Lamp 1A Button sealed with patented rolling sleeve principle Motor 3A DWV 1050Vrms Contact area sealed at case & terminals Low Level 10mA 30mV Moistureproof & dusttight to IP64 & MIL-PRF-8805 Electrical Life: 25,000 cycles Design 2 or watertight to IP68S Mechanical Life: 1,000,000 cycles Less than 25m contact resistance Seal: IP64 & MIL-PRF-8805 Design 2 or IP68S Handles low level up to 10 amps Operating Temp Range: -55C to +85C Operating Force: 3.0 lbs. +1/-0.5 lb. Variety of mounting styles Total Travel: 0.180 inches max Engraved buttons available Overtravel: 0.012 inches min Choice of 9 button & 3 bezel colors MATERIALS: Panel appearance matches most other OTTO Case: Anodized aluminum alloy momentary pushbutton switches Button: Thermoplastic Unsealed construction also available Terminals: Brass, silver plate or gold plate for low level Terminal Hardware: Terminal lugs, lockwasher and screw for screw terminal option RoHS/WEEE/Reach compliant Mounting Hardware: Hex nut, lockwasher and panel seal on watertight switches 119 OTTO Full Line Catalog Specifications Subject To Change Without Notice Push On, Push Off actionPUSHBUTTONS P5 ALTERNATE ALTERNATE ACTION PUSHBUTTONS ACTION SEALED AGAINST DUST & MOISTURE P5-1 Series P5-3 Series Case Style 1 Case Style 3 Press Fit Mount Bezel/Threaded Bushing P5-4 Series P5-6 Series Case Style 4 Case Style 6 15/32 Threaded Bushing 5/8 Threaded Bushing 1.281 MAX375.015 .062 .062 .875 .156 MIN500 .250 FROM POTTING +.003 .563 3X .182 -.005 5/8-24 UNEF-2A TO WITHIN .062 OF FLANGE .375 P5 PART NUMBER CODE P5 X X X X X X Case Style Terminal Style Circuit Form/Contact Seal Level Bezel Color Button Color Material/Grade 1. Style 1 1. Solder 1. SPST/Silver/Commercial 1. Unsealed 1. Silver 1. Red 3. Style 3 2. SPST/Gold/Commercial 2. Dusttight 2. Black 2. Black 2. Screw 4. Style 4 3. SPDT/Silver/Commercial 3. Watertight 3. Orange 3. 0.250 Quick Connect 3. Red 6. Style 6 4. SPDT/Gold/Commercial 4. Yellow 5. SPST/Silver/Military Grade 5. Green 6. SPST/Gold/Military Grade 6. Blue 7. SPDT/Silver/Military Grade 7. Purple 8. SPDT/Gold/Military Grade 8. Gray 9. White Screw terminals available on SPST circuit forms only. Specifications Subject To Change Without Notice www.ottoexcellence.com 120