P5-V VANDAL RESISTANT VANDAL RESISTANT PUSHBUTTONS PUSHBUTTONS ALTERNATE ACTION, SEALED AGAINST DUST & MOISTURE The P5-V switch gives you all the functionality of the P5 Alternate Action switch with the added benefit of an aluminum security level case and button or a stainless steel vandal resistant case and button. Push and the P5-V switch turns on. Push again and the switch turns off. Positive tactile feedback is featured so the operator is clearly aware the switch has been actuated. The button returns to the original position after each actuation. To guard against front panel splash and dirt the P5-V is sealed at the button with OTTOs patented rolling sleeve design. The terminals are sealed with epoxy, providing a seal against flux during wiring and behind panel dirt and moisture. The High Profile Flat Button combination of sealing provides smooth operation over a wide High Profile temperature range. Watertight sealing to IP68S and IP69K is Curved Button also available. We are able to provide custom button engraving with epoxy ink backfill and other special characters, shrouded buttons, contact configurations and materials to suit your application requirements. Standard Characteristics/Ratings: ELECTRICAL RATINGS: Features: Load Sea Level Security (aluminum) or vandal resistant 28VDC or 115VAC (stainless steel) case & button Resistive 5A Inductive 3A Button sealed with patented rolling sleeve design Lamp 1A Contact area sealed at case & terminals Motor 3A Watertight to IP68S and IP69K or dusttight & DWV 1000Vrms moistureproof to IP64 Logic Level 10mA 5VDC Handles logic level up to 5 amps Electrical Life: 25,000 cycles (1,000,000 logic level) Mechanical Life: 1,000,000 cycles 1 million mechanical cycle life Seal: IP64 or IP68S and IP69K RoHS compliant Operating Temp Range: -40C to +85C Operating Force: 3.0 lbs. +1/-0.5 lb. Total Travel: 0.180 inches max Overtravel: 0.012 inches min MATERIALS: Case: Anodized aluminum alloy or stainless steel (303) Button: Anodized aluminum alloy or stainless steel (303) Terminals: Brass with gold over silver Terminal Hardware: Screw, lockwasher and terminal lug when applicable Mounting Hardware: Hex nut, lockwasher and panel seal when applicable 194 OTTO Full Line Catalog Specifications Subject To Change Without NoticePUSHBUTTON SWITCHES P5-V VANDAL RESISTANT VANDAL RESISTANT PUSHBUTTONS PUSHBUTTONS SEALED AGAINST DUST & MOISTURE High Profile, Flat Button Low Profile, Curved Button .16 .14 Bezel Profile/Button Style 1 Bezel Profile/Button Style 4 .88 .87 .44 .44 A 1.26 MAX. 1.35 MAX. 1 2 C .156 MIN. A FROM POTTING .57 High Profile, Curved Button Flush Mount, Flat Button .26 .05 Bezel Profile/Button Style 2 Bezel Profile/Button Style 5 A .44 .44 1.37 1.16 MAX. MAX88 A .57 .57 Low Profile, Flat Button .08 Bezel Profile/Button Style 3 .594 .718 TO FLAT TO FLAT IF APPLICABLE IF APPLICABLE A .44 .03 TYP. ALL TERM. 1.35 STYLES MAX625-24 UNEF-2A .750-20 UNEF-2A Case Style Dimension 1 - 4 5 - 8 .88 A (Button Dia.) .525 .590 B (Thread) 0.625-24 UNEF-2A 0.750-20 UNEF-2A .57 D-Flat .594 0.718 P5-V PART NUMBER CODE P5 X X X X X X Type Thread* Terminal Style/ Circuit / Seal Bezel Profile/ Case Color Contacts Button V. Stainless 1. 5/8-24 & Hex Nut 1. Solder Terminal/Silver 1. SPST/Silver 1. Dusttight 1. High Profile/Flat Button A. Aluminum 3. 5/8-24 W/DFlat & Hex Nut 2. Screw Terminal/Silver 2. SPST/Gold 2. Watertight 2. High Profile/Curved Button 5. 3/4-20 & Hex Nut 3. Solder Terminal/Black 3. SPDT/Silver 3. Low Profile/Flat Button 7. 3/4-20 W/DFlat & Hex Nut 4. Screw Terminal/Black 4. SPDT/Gold 4. Low Profile/Curved Button 5. Flush Profile * For Knurl Nut Thread options, contact factory. Only Available on P5-A Styles. Screw terminals available on SPST circuits only. Specifications Subject To Change Without Notice www.ottoexcellence.com 195