R2AB2122NNNN OTTO

R2 LIGHTED ROTARY ROTARY SWITCH UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X .83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch is an excellent replacement for rocker switches offering improved visual position indication, additional lighting options and different styling opportunities on front panels. The R2 series is a sealed, lighted rotary switch which snaps into a 1.45 x .83 industry standard rocker switch panel opening. The rotary knob snaps onto a shaft and can be installed by the panel builder for those desiring that flexibility. The R2 rotary switch provides up to 3 positions in all combinations of momentary and maintained action. It is capable of handling loads from logic level to 20 amps (resistive). Sealing is to IP68 (1 meter immersion) via a shaft o-ring seal in front and a potted base in the back. Termination options include .250 fast on, solder lug or a snap on modular connector. The R2 offers unique lighting options including up to three independent LED light positions which illuminate a lens on the rotary knob. This design provides more lighting options than traditional rocker switches, handles the full range of electrical loads and is robust enough to survive in the most demanding applications. Quality Features: Sealed watertight per IP68 Standard Characteristics/Ratings: Snap-in panel mounting into industry standard OPERATIONAL: 1.45 x .83 panel cutout Mechanical Life: 100,000 cycles Seal: Watertight to IP68 Unique lighting options up to three independent Temperature Range: -40C to +85C LED light positions Plastic or Soft Touch knob options available MATERIALS: 2 or 3 positions in all combinations of momentary Case/Base: Thermoplastic and maintained action Knob: Thermoplastic Terminals: Copper alloy silver plate gold plate for low level Termination options include .250 fast on, solder Contacts: Silver alloy Gold plate for low level lug or a snap on modular connector Panel Thickness: .025 min to .187 max Mounting: Snap in from front 1.45 x .83 panel cutout ELECTRICAL: LOAD Type Current Rating LIFE (Min.) 12 & 28 VDC 110 VAC Resistive 20 amps 16 amps 25,000 cycles Inductive 15 amps 15 amps 25,000 cycles Lamp 4 amps 4 amps 25,000 cycles Motor Load: 1/2 HP at 110 vac 78 OTTO CONTROLS 2005 Full Line Catalog Specifications Subject To Change Without NoticeROTARY SWITCHES R2 LIGHTED ROTARY ROTARY SWITCH UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X .83 PANEL CUTOUT Specifications Subject To Change Without Notice OTTO CONTROLS www.ottoeng.com 79