Conductive Polymer Tantalum Solid Capacitors Surface Mount Type TDC series Features Guaranteed at 125 1000 h High voltage (25 V max.) RoHS compliance, Halogen free Specifications Size code B2 D2 D3L Category temp. range 55 to +125 Rated volt. range 16 V to 25 V 16 V 16 V to 25 V Category volt. range 12.8 V to 20 V 12.8 V 12.8 V to 20 V Rated cap. range 15 F to 33 F 100 F 68 F to 150 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current Please see the attached characteristics list Dissipation factor(tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.15 +125 1000 h, category voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor(tan ) 2 times of the initial limit Leakage current 2 times of the initial limit +60 , 90 % to 95 % RH, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, 20 % of the initial value Dissipation factor(tan ) 1.5 times of the initial limit (Steady State) Leakage current 3 times of the initial limit Marking Dimensions (not to scale) L Rated capacitance code D size is capacitance. (F)) Polarity marking (+) Lot. No. Rated voltage code R. voltage code B size D size Unit V S S W1 C 16 E 25 C 16 1E 25 Unit D 20 D 20 Size code L W0.2 H S0.2 W10.1 B2 3.50.2 2.8 1.90.1 0.8 2.2 R. capacitance code (B size) D2 7.30.2 4.3 1.90.1 1.3 2.4 Unit F E7 15 J7 22 N7 33 D3L 7.30.3 4.3 2.80.2 1.3 2.4 * Externals of figure are the reference. Characteristics list Case size Floor life Cate- Specifications Standard level Rated Cate- Rated gory Rated temper- Size Min. gory capaci- *1 voltage temper- *4 Reflow Reflow Ripple *2 packaging ature LC voltage tance code *3 ESR temp temp L W H Part number (V) ature tan current q ty (m max.) () (V) (F) (A) 260 250 (mA rms) () (pcs) 105 12.8 125 33 3.5 2.8 1.9 B2 1000 90 0.10 158.4 16TDC33MYFB 2000 16 105 12.8 125 100 7.3 4.3 1.9 D2 1800 50 0.10 160.0 16TDC100MYF 3000 105 12.8 125 150 7.3 4.3 2.8 D3L 1800 50 0.10 240.0 16TDC150MYF 2500 105 16 125 22 3.5 2.8 1.9 B2 1000 90 0.10 132.0 20TDC22MYFB 2000 - 3 20 105 16 125 100 7.3 4.3 2.8 D3L 1700 55 0.10 200.0 20TDC100MYF 2500 105 20 125 15 3.5 2.8 1.9 B2 900 100 0.10 112.5 25TDC15MYFB 2000 25 105 20 125 68 7.3 4.3 2.8 D3L 1400 70 0.10 170.0 25TDC68MYF 2500 *1: Ripple current (100 kHz / +105 ) *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 5 minutes Please refer to each page in this catarog for Reflow conditions ,Taping specifications andFloor life leve . Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Aug-19 W HGuidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products typical operations and application circuits. We do not guarantee the non-infringement of third party s intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please selectSales Inquir in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 16-Apr-21