2R5SVPE390M Panasonic

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVPE series Features Low ESR (8 m max.) Large capacitance (1200 F max.) RoHS compliance, Halogen free Specifications Size code B6 C6 C10 F12 Category temp. range 55 to +105 Rated voltage range 2.5 V to 6.3 V 2.5 V to 10 V 2.0 V to 16 V 16 V Nominal cap.range 150 F to 390 F 220 F to 390 F 180 F to 1200 F 470 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +105 2000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) 0.2 max. Polarity marking () W Lot No. Series code* L R R. capacitance Unit R. voltage (F) Size +0.1 *1 D0.5 L W0.2 H0.2 C0.2 R P (V) -0.4 code 0.6 to 0.8 B6 5.0 5.9 5.3 5.3 6.0 1.4 C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 0.6 to 0.8 C10 6.3 9.9 6.6 6.6 7.3 2.1 * Depends on the case size. F12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 *1 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05-Mar-21 D H P CSVPE series Characteristics list Case size Specifications StandardReel size : 380 (mm) Rated Rated capacitance Size ESR (m max.) Min. voltage Ripple *3 (20 %) code Packaging LC *2 *1 (V) D L tan Part number current (F) 100 kHz 300 kHz / Q ty (A (mA rms) (pcs) / 20 20 2.0 1200 6.3 9.9 C10 5230 8 8 0.12 500 2SVPE1200M 500 270 5.0 5.9 3860 10 9 0.12 500 2R5SVPE270M 1500 5.0 5.9 3150 15 13 0.12 500 2R5SVPE330M 1500 330 B6 2.5 5.0 5.9 3860 10 9 0.12 500 2R5SVPE330MY 1500 5.0 5.9 3860 10 9 0.12 700 2R5SVPE390MX 1500 390 6.3 5.9 C6 3900 10 9 0.12 500 2R5SVPE390M 1000 150 5.0 5.9 3520 12 10 0.12 500 6SVPE150M 1500 180 5.0 5.9 3150 15 13 0.12 500 6SVPE180M 1500 B6 6.3 5.0 5.9 3150 15 13 0.12 500 6SVPE220MW 1500 220 6.3 5.9 3900 10 9 0.12 500 6SVPE220M 1000 C6 10 220 6.3 5.9 2700 20 18 0.12 500 10SVPE220M 1000 180 6.3 9.9 C10 4460 11 10 0.12 576 16SVPE180M 500 16 470 10.0 12.6 F12 6100 10 9 0.12 1504 16SVPE470M 400 *1: Ripple current (100 kHz / +105 ) *2: tan (120 Hz / +20 ) *3: After 2 minutes Please refer to each page in this catarog for Reflow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05-Mar-21