Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SEPC Features Super low ESR (5 m to 24 m) Large capacitance (2700 F max.) RoHS compliance, Halogen free Specifi cations Size code B9 C55 C6 C9 E7 E9 E12 E13 F13 Category temperature range 55 C to +105 C Rated voltage range (V.DC) 2.5 6.3 2.5 to 16 6.3 to 16 2.5 to 16 16 2.5 to 6.3 2.5 to 16 Rated capacitance range (F) 100 to 560 220 100 to 560 100 to 820 150 to 1000 180 to 1000 180 to 270 470 to 820 470 to 2700 Capacitance tolerance 20 % (120 Hz / + 20 C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 C, 5000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) E12, E13, F13 Size Unit : mm fd Size code fD0.5 L max. F0.5 fd0.05 + B9 5.0 9.0 2.0 0.6 Polarity marking () C55 6.3 5.5 2.5 0.45 15 min. 4 min. 1 Lot. No. C6 6.3 6.0 2.5 0.45 L 19 min. C9 6.3 9.0 2.5 0.6 Series 2 B9, C55, C6, C9, E7, E9 Size E7 8.0 7.0 3.5 0.6 fd E9 8.0 9.0 3.5 0.6 R. Capacitance + E12 8.0 12.0 3.5 0.6 R. Voltage E13 8.0 13.0 3.5 0.6 15 min. 4 min. F13 10.0 13.0 5.0 0.6 L 19 min. 1 2SEPC390M, 2SEPC560M : 0.50.05 B9, C55, C6, C9, E7, E9 size flat rubber is used. 2 16SEPC150MD, 10SEPC270M : 0.450.05 Externals of gure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 fD fD F FConductive Polymer Aluminum Solid Capacitors Characteristics list Case size (mm) Specifications Rated Rated 1 Size Ripple 2 4 Series voltage capacitance Part number ESR LC 3 L code current tan d fD (V.DC) (F) (m max.) (A) (mAr.m.s.) 100 5.0 9.0 4180 7 0.10 500 2SEPC100MZ B9 300 5.0 9.0 4180 7 0.10 500 2SEPC330MZ 390 6.3 6.0 C6 3900 10 0.12 500 2SEPC390M 470 5.0 9.0 4180 7 0.10 500 2SEPC470MZ B9 5.0 9.0 4180 7 0.10 500 2SEPC560MZ 6.3 6.0 C6 3900 10 0.12 500 2SEPC560M 560 6.3 9.0 C9 5600 7 0.10 500 2SEPC560MW 2.5 8.0 9.0 E9 4700 8 0.10 280 2SEPC560MX 6.3 9.0 C9 5600 7 0.10 500 2SEPC820MW 8.0 7.0 E7 5300 8 0.10 500 2SEPC820MD 820 8.0 9.0 6100 7 0.10 500 2SEPC820MX E9 8.0 9.0 7200 5 0.10 500 2SEPC820MY 8.0 13.0 E13 6100 7 0.10 500 2R5SEPC820M 1000 8.0 9.0 E9 6100 7 0.10 500 2SEPC1000MX 2700 10.0 13.0 F13 5560 10 0.10 1350 2SEPC2700M 6.3 9.0 C9 5600 7 0.10 500 4SEPC560MW 560 8.0 9.0 E9 6100 7 0.10 500 4SEPC560MX 4.0 8.0 13.0 6100 7 0.10 500 4SEPC560M E13 680 8.0 13.0 6100 7 0.10 544 4SEPC680M SEPC 820 10.0 13.0 F13 6640 7 0.10 656 4SEPC820M 220 6.3 5.5 C55 2980 18 0.12 280 6SEPC220M 6.3 9.0 C9 5600 7 0.10 592 6SEPC470MW 470 8.0 9.0 E9 5700 8 0.10 592 6SEPC470MX 8.0 13.0 E13 5700 8 0.10 592 6SEPC470M 6.3 6.3 9.0 C9 5600 7 0.10 705 6SEPC560MW 560 8.0 9.0 E9 6100 7 0.10 705 6SEPC560MX 680 10.0 13.0 E13 6640 7 0.10 857 6SEPC680M 1000 8.0 7.0 E7 3530 18 0.10 1260 6SEPC1000MD 1500 10.0 13.0 F13 5560 10 0.10 1890 6SEPC1500M 10 270 8.0 7.0 E7 3220 22 0.12 500 10SEPC270MD 6.3 6.0 C6 2490 24 0.10 320 16SEPC100M 100 6.3 9.0 C9 4680 10 0.10 500 16SEPC100MW 150 8.0 7.0 E7 3220 22 0.12 500 16SEPC150MD 8.0 9.0 E9 5000 10 0.10 576 16SEPC180MX 180 16 8.0 12.0 E12 4360 16 0.10 576 16SEPC180M 220 8.0 7.0 E7 4150 13 0.10 500 16SEPC220MD 8.0 9.0 E9 5000 10 0.10 864 16SEPC270MX 270 8.0 12.0 E12 5000 11 0.10 864 16SEPC270M 470 10.0 13.0 F13 6100 10 0.10 1504 16SEPC470M 1 Ripple current (100 kHz/ +105 C ), 2 ESR (100 kHz to 300 kHz/+20 C) 3 tan d (120 Hz/+20 C) 4 After 2 minutes Please refer to each page in this catarog for Flow conditions and Taping specifications. Frequency correction factor for ripple current Frequency 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz < < < < Coef cient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015