32SEPF22MTSS Panasonic

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type SEPF series Features High voltage (35 V max.) Large capacitance (1000 F max.) RoHS compliance, Halogen free Specifications Size code C55 C6 E7 E12 F13 Category temp. range 55 to +105 Rated voltage range 16 V to 35 V 16 V to 32 V Nominal cap.range 22 F to 150 F 22 F to 180 F 39 F to 270 F 82 F to 560 F 120 F to 1000 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +105 5000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) Polarity marking () d Lot No. Series code* 15 min. 4 min. L max. 19 min. R. capacitance Unit (F) R. voltage Size code D0.5 L max. F0.5 d0.05 (V) C55 6.3 5.5 2.5 0.45 C6 6.3 6.0 2.5 0.5 *1 E7 8.0 7.0 3.5 0.5 E12 8.0 12.0 3.5 0.6 * Depends on the case size. F13 10.0 13.0 5.0 0.6 *1: 32SEPF68M : 0.60.05 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15 D FSEPF series Characteristics list Case size Specifications (mm) Part number Rated Rated capacitance Size Ripple voltage *4 *2 Click here for part number (20 %) code LC ESR *3 *1 (V) D L tan current list of lead terminal cutting (F) (m max.) (A and lead terminal taping (mA rms) 150 6.3 5.5 C55 2590 30 0.12 480 16SEPF150M 180 6.3 6.0 C6 3300 22 0.12 576 16SEPF180M 16 270 8.0 7.0 E7 3300 22 0.12 864 16SEPF270M 560 8.0 12.0 E12 4950 14 0.12 1792 16SEPF560M 1000 10.0 13.0 F13 5400 12 0.12 3200 16SEPF1000M 120 6.3 6.0 C6 3200 25 0.12 480 20SEPF120M 180 8.0 7.0 E7 3200 25 0.12 720 20SEPF180M 20 390 8.0 12.0 E12 4950 14 0.12 1560 20SEPF390M 560 10.0 13.0 F13 5400 12 0.12 2240 20SEPF560M 56 6.3 6.0 C6 2800 30 0.12 280 25SEPF56M 82 8.0 7.0 E7 3000 28 0.12 410 25SEPF82M 25 180 8.0 12.0 E12 4650 16 0.12 900 25SEPF180M 330 10.0 13.0 F13 5000 14 0.12 1650 25SEPF330M 22 6.3 5.5 C55 2400 35 0.12 140 32SEPF22M 32 68 8.0 7.0 E7 3200 25 0.10 435 32SEPF68M 22 6.3 6.0 C6 2600 35 0.12 154 35SEPF22M 39 8.0 7.0 E7 2800 30 0.12 273 35SEPF39M 35 82 8.0 12.0 E12 4000 20 0.12 574 35SEPF82M 120 10.0 13.0 F13 4400 18 0.12 840 35SEPF120M *1: Ripple current (100 kHz / +105 ) *2: ESR (100 kHz to 300 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Flow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15