Conductive Polymer Tantalum UPGRADE Solid Capacitors Surface Mount Type TQC series B size Features High voltage35 V max. RoHS compliance, Halogen free Specifications Size code B2 Category temp. range 55 to +105 Rated volt. range 16 V to 35 V Category volt. range 16 V to 35 V Rated cap. range 3.9 F to 47 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current Please see the attached characteristics list Dissipation factor(tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.15 +105 2000 h (16TQC33MYFB : 1000 h), rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor(tan ) 1.5 times of the initial limit Leakage current Within the initial limit +60 , 90 % to 95 % RH, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, 20 % of the initial value Dissipation factor(tan ) 1.5 times of the initial limit (Steady State) Leakage current 3 times of the initial limit Marking Dimensions (not to scale) Polarity marking (+) Rated capacitance code L Lot. No. Rated voltage code UnitV R. voltage code C 16 E 25 D 20 V 35 S S W1 R. capacitance code UnitF Q6 3.9 A7 10 N7 33 Unit W10.1 U6 5.6 E7 15 S7 47 Size code L0.2 W0.2 H0.1 S0.2 Y6 8.2 J7 22 B2 3.5 2.8 1.9 0.8 2.2 * Externals of figure are the reference. Characteristics list Case size Floor life Cate- Specifications Standard Rated Cate- Rated level Rated gory Min. temper- gory capaci- Size *1 voltage temper- Ripple *4 Reflow Reflow *2 packaging LC ature voltage tance ESR *3 code temp temp L W H Part number tan (V) ature current q ty (m max.) (A) () (V) (F) 260 250 (mA rms) () (pcs) 105 16 105 10 3.5 2.8 1.9 800 100 0.10 48.0 16TQC10M 2000 105 16 105 15 3.5 2.8 1.9 1000 90 0.10 72.0 16TQC15M 2000 16 105 16 105 22 3.5 2.8 1.9 1000 90 0.10 35.2 16TQC22MYFB 2000 105 16 105 33 3.5 2.8 1.9 1000 90 0.10 158.4 16TQC33MYFB 2000 105 16 105 47 3.5 2.8 1.9 1000 90 0.15 225.6 16TQC47MYFB 2000 3 105 20 105 8.2 3.5 2.8 1.9 800 100 0.10 49.2 20TQC8R2M 2000 20 105 20 105 22 3.5 2.8 1.9 1100 90 0.10 132.0 20TQC22MYFB 2000 B2 3 105 25 105 5.6 3.5 2.8 1.9 800 100 0.10 42.0 25TQC5R6M 2000 NEW 105 25 105 10 3.5 2.8 1.9 900 100 0.10 25.0 25TQC10MEB 2000 25 105 25 105 15 3.5 2.8 1.9 900 100 0.10 112.5 25TQC15MYFB 2000 105 25 105 22 3.5 2.8 1.9 1100 100 0.10 165.0 25TQC22MYFB 2000 3 105 35 105 3.9 3.5 2.8 1.9 500 400 0.10 40.9 35TQC3R9MYF 2000 35 105 35 105 3.5 2.8 1.9 900 150 0.15 105.0 35TQC10MYFB 2000 3 10 NEW 105 35 105 3.5 2.8 1.9 750 200 0.15 105.5 35TQC10MXB 2000 3 *1: Ripple current100 kHz / +105 *2: ESR100 kHz / +20 *3: tan (120 Hz / +20 ) *4: After 5 minutes Please refer to each page in this catarog for Reflow conditions ,Taping specifications andFloor life leve . Small order quantity (500 pcs/reel) is available with TQC series. Please contact our sales representative if you prefer it. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09-Jul-21 W HConductive Polymer Tantalum UPGRADE Solid Capacitors Surface Mount Type TQC series D size Features High voltage35 V max. RoHS compliance, Halogen free Specifications Size code D12 D15 D2 D3L Category temp. range 55 to +105 Rated volt. range 16 V 16 V to 25 V 16 V to 35 V 16 V to 25 V Category volt. range 16 V 16 V to 25 V 16 V to 35 V 16 V to 25 V Rated cap. range 33 F 22 F to 47 F 10 F to 150 F 68 F to 220 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current Please see the attached characteristics list Dissipation factor(tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.15 +105 2000 h rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor(tan ) 1.5 times of the initial limit Leakage current Within the initial limit +60 , 90 % to 95 % RH, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, 20 % of the initial value Dissipation factor(tan ) 1.5 times of the initial limit (Steady State) Leakage current 3 times of the initial limit Marking Dimensions (not to scale) L Rated capacitance (F) Polarity marking (+) Rated voltage code Lot. No. S S W1 Unit Size code L W0.2 H S0.2 W10.1 D12 7.30.2 4.3 1.150.05 1.3 2.4 R. voltage code UnitV D15 7.30.2 4.3 1.40.1 1.3 2.4 C 16 1E 25 D2 7.30.2 4.3 1.90.1 1.3 2.4 D 20 V 35 D3L 7.30.3 4.3 2.80.2 1.3 2.4 * Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09-Jul-21 W H