4SEP100M+TSS Panasonic

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type SEP series Features Standard 105 3000 h RoHS compliance, Halogen free Specifications Size code C6 E7 E12 F8 F13 Category temp. range 55 to +105 Rated voltage range 4.0 V to 20 V 2.5 V to 20 V 4.0 V to 20 V 2.5 V to 20 V Nominal cap.range 22 F to 150 F 33 F to 330 F 100 F to 680 F 56 F to 680 F 150 F to 1500 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +105 3000 h, rated voltage applied (2.5 V products : 2000 h) Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) Polarity marking () d Lot No. Series code* 15 min. 4 min. 19 min. L R. capacitance Unit (F) R. voltage Size code D0.5 L max. F0.5 d0.05 (V) C6 6.3 6.0 2.5 0.45 E7 8.0 7.0 3.5 0.45 E12 8.0 12.0 3.5 0.6 F8 10.0 8.0 5.0 0.5 * Depends on the case size. F13 10.0 13.0 5.0 0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15 D FSEP series Characteristics list Case size Specifications (mm) Part number Rated Rated capacitance Size Ripple voltage Click here for part number *2 *4 code LC (20 %) ESR *1 *3 (V) D L current tan list of lead terminal cutting (F) (m max.) (A (mA rms) and lead terminal taping 680 8.0 12.0 E12 4520 13 0.15 340 2R5SEP680M 2.5 1500 10.0 13.0 F13 5440 12 0.18 750 2R5SEP1500M 100 6.3 6.0 1810 40 0.12 200 4SEP100M C6 150 6.3 6.0 1810 40 0.12 300 4SEP150M 220 8.0 7.0 2560 35 0.12 440 4SEP220M E7 330 8.0 7.0 2560 35 0.12 660 4SEP330M 4.0 470 10.0 8.0 F8 3700 25 0.12 376 4SEP470M 560 8.0 12.0 E12 4520 13 0.15 448 4SEP560M 680 10.0 8.0 F8 3700 25 0.12 544 4SEP680M 1200 10.0 13.0 F13 5440 12 0.18 960 4SEP1200M 82 6.3 6.0 C6 1700 45 0.12 258 6SEP82M 150 8.0 7.0 E7 2560 35 0.12 472 6SEP150M 6.3 330 10.0 8.0 F8 3700 25 0.12 416 6SEP330M 470 8.0 12.0 E12 4210 15 0.15 592 6SEP470M 820 10.0 13.0 F13 5440 12 0.15 775 6SEP820M 56 6.3 6.0 C6 1700 45 0.12 280 10SEP56M 120 8.0 7.0 E7 2560 35 0.12 600 10SEP120M 10 270 10.0 8.0 F8 3700 25 0.12 540 10SEP270M 330 8.0 12.0 E12 3950 17 0.15 660 10SEP330M 560 10.0 13.0 F13 5230 13 0.15 840 10SEP560M 39 6.3 6.0 C6 1620 50 0.10 312 16SEP39M 82 8.0 7.0 E7 2120 40 0.12 656 16SEP82M 16 150 10.0 8.0 F8 3020 30 0.12 480 16SEP150M 180 8.0 12.0 E12 3640 20 0.15 576 16SEP180M 330 10.0 13.0 F13 4720 16 0.15 792 16SEP330M 22 6.3 6.0 C6 1450 60 0.10 220 20SEP22M 33 8.0 7.0 1890 45 0.12 330 20SEP33M E7 47 8.0 7.0 1890 45 0.12 470 20SEP47M 56 10.0 8.0 2400 40 0.12 224 20SEP56M 20 68 10.0 8.0 F8 2400 40 0.12 272 20SEP68M 10.0 8.0 2570 35 0.12 400 20SEP100MX 100 8.0 12.0 E12 3320 24 0.15 400 20SEP100M 150 10.0 13.0 F13 4320 20 0.15 600 20SEP150M *1: Ripple current (100 kHz / +105 ) *2: ESR (100 kHz to 300 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Flow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Nov-15