Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series: SXE UPGRADE Features Super high voltage (100 V.DC max.) RoHS compliance, Halogen free Specifications Size code E7 F8 E12 F13 Category temp. range 55 to +125 Rated voltage range 63 V.DC to 100 V.DC Nominal cap.range 6.8 F to 18 F 15 F to 39 F 15 F to 56 F 18 F to 100 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +125 , 1000 h, rated voltage applied Capacitance change Within 20 % of the initial value Dissipation factor (tan) 200 % of the initial limit DC leakage current Within the initial limit Endurance +60 , 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) Polarity marking d0.05 Lot No. Series 15 min. 4 min. L max. 19 min. Unit R. capacitance +0.1 Size D0.5 L W0.2 H0.2 C0.2 R P0.2 -0.4 (F) code R. voltage E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 V.DC) 0.6 to 0.8 F8 10.0 7.9 10.3 10.3 11.0 4.6 E12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2 F13 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 25-Apr-19 D0.5 FConductive Polymer Aluminum Solid Capacitors Characteristics list Case size Specifications (mm) Rated Rated Allowable Size cap. Ripple *2 *4 Part number vol. ripple ESR LC (20 %) code *3 *1 D L tan (V.DC) current *1 current (m) A (F) (mA r.m.s.) (mA r.m.s.) 18 8.0 7.0 E7 340 1100 60 0.12 56 63SXE18M 33 8.0 12.0 E12 930 2950 25 0.12 104 63SXE33M 8.0 12.0 E12 930 2950 25 0.12 122 63SXE39M 39 63 10.0 8.0 F8 690 2190 50 0.12 122 63SXE39MX NEW 56 8.0 12.0 E12 930 2950 25 0.12 176 63SXE56M 68 10.0 13.0 F13 1030 3280 25 0.12 214 63SXE68M NEW 100 10.0 13.0 F13 1030 3280 25 0.12 315 63SXE100M 12 8.0 7.0 E7 340 1100 60 0.12 48 80SXE12M 8.0 12.0 E12 780 2490 35 0.12 108 80SXE27M 27 10.0 8.0 F8 660 2080 55 0.12 108 80SXE27MX 80 NEW 33 8.0 12.0 E12 780 2490 35 0.12 132 80SXE33M 47 10.0 13.0 F13 980 3100 28 0.12 980 80SXE47M NEW 56 10.0 13.0 F13 980 3100 28 0.12 224 80SXE56M 6.8 8.0 7.0 E7 340 1100 60 0.12 34 100SXE6R8M 10.0 8.0 F8 630 2000 60 0.12 75 100SXE15MX 15 8.0 12.0 E12 730 2350 40 0.12 75 100SXE15M 100 10.0 13.0 F13 940 3000 30 0.12 90 100SXE18M 18 8.0 12.0 E12 730 2350 40 0.12 90 100SXE18MX NEW 22 10.0 13.0 F13 940 3000 30 0.12 110 100SXE22M NEW 27 10.0 13.0 F13 940 3000 30 0.12 135 100SXE27M *1: Ripple current (100 kHz / +105 C < Tx +125 C) /Allowable ripple current (100 kHz / Tx +105 C) *2: ESR100 kHz to 300 kHz / +20 *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Reflow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f 1 kHz 1 kHz f 10 kHz 10 kHz f 100 kHz 100 kHz f 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 25-Apr-19