ABJ1,2,3,4,5
TURQUOISE SWITCHES
HIGH ENVIRONMENTAL
RESISTANCE
ABJ TYPE
FEATURES
6 Ultra-miniature size (12.86.56 mm)
12.8
6.5 Sealed construction for use in adverse environment-Sealed
construction by epoxy resin and rubber cap greatly reduces possible
miscontact due to contaminants such as dust. Conforming to IP67* of
IEC protective construction classication
Dust protected type (Mounting hole
Elastomer double molding technology, an industry rst and ultrasonic
2.3mm type)
swaging technology contribute to uniform sealing in high production
quantities
UL/CSA approved (Except the long stroke type of ABJ2 and the side
wire leads type.)
Long stroke type is available
Since the repeatability is excellent and the play distance (overtravel) from
the operating position is ample, the task of performing adjustments during
installation is easy.
Immersion protected type (Mounting hole
Operating position accuracy 0.4 mm
(wire leads bottom type) 2.3mm type)
Overtravel= Min. 2.0 mm
As wide range of high pressure is achieved, a stable reliability is ensured
Leaf lever side wire leads type added. We now offer two types.
M3 type installation hole
Fixed pin type
TYPICAL APPLICATIONS
Immersion protected Long stroke type
Industrial use video jack
(wire leads side type)
Automotive (ex. Device for opening and shutting of automobile doors)
* Based on the protective construction classication of IEC, items which
satisfy the test requirements are denoted with an IP designation.
Compliance with RoHS Directive
ORDERING INFORMATION
(If Agency standard required, please refer to the with Agency standard type. See next page.)
Ex. ABJ 1 4 1 0 4 0
Operating force
Type of Size of Contact
Terminal Actuator by pin plunger Contact
switch mounting hole arrangement
(max.)
ABJ: 1: 1.2 mm 4: Solder terminal 1: SPDT 0: Pin plunger 4: 1.23 N 0: AgNi alloy
Turquoise 2: 2.3 mm 5: PC board terminal 2: SPST-NC 2: Hinge lever 6: 1.96 N 1: AgNi alloy
switch 3: 3 mm 6: Wire leads (bottom type) (Wire leads 4: Simulated roller lever 7: 2.45 N + Au clad
J type 4: Fixed pin 7: Wire leads (right side type) type only) 6: Roller lever (Long stroke
(right side pin) type 8: Wire leads (left side type) 3: SPST-NO 8: Leaf lever type only)
5: Fixed pin (Wire leads (Mounting hole 3 mm
(left side pin) type type only) lead wire type only)
L: Long stroke type
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, PRODUCT TYPES.
All Rights Reserved COPYRIGHT Panasonic Electric Works Co., Ltd.ABJ1,2,3,4,5
With Agency standard type
Ex. ABJ 1 4 1 0 4 0 9
Type of Size of Contact Operating force by Agency
Terminal Actuator Contact
switch mounting hole arrangement pin plunger (max.) standard
ABJ: 1: 1.2 mm 4: Solder terminal 1: SPDT 0: Pin plunger 4: 1.23 N 0: AgNi alloy 9: UL/CSA
3
Turquoise 2: 2.3 mm 5: PC board terminal 2: SPST-NC 2: Hinge lever 6: 1.96 N 1: AgNi alloy 6 10
switch 3: 3 mm 6: Wire leads (Wire leads 4: Simulated roller lever + Au clad rated
J type (bottom type) type only) 6: Roller lever
3: SPST-NO 8: Leaf lever
(Wire leads (Mounting hole 3 mm
type only) lead wire type only)
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, PRODUCT TYPES.
CONTACT ARRANGEMENT
1. SPDT 2. SPST-NC (Wire leads type only) 3. SPST-NO (Wire leads type only)
COM NO NC COM NC COM NO
APPLICABLE CURRENT RANGE (reference)
2A
AgNi alloy
1A
OF1.23N OF1.96N
100mA
Au clad
1mA
0
DC 5V 15V 30V
AC 5V 15V 125V
Note) OF: Value of pin plunger
All Rights Reserved COPYRIGHT Panasonic Electric Works Co., Ltd.