AEQ1 AEQ (EQ) LOW LEVEL LOAD SWITCH (100 A at 3 VDC) SWITCHES FEATURES TYPICAL APPLICATIONS Handles low level load 100 A at 3 Household appliances VDC to 100 mA 30 VDC (Cover detection of air conditioners Minimum switching capacity and air puriers for safety purpose. (reference value) 10 A at 1 VDC Cover destruction detection of crime Ultra-long stroke. For pin plunger prevention devices.) type, it maintains an ultra-long stroke O.T. (Over Travel) with over 2.2 mm on the NO side and over 2.5 mm on the NC side. Since contact pressure does not depend on the operation stroke, the range of possible use over the entire RoHS compliant stroke is greatly increased. Silent operation ORDERING INFORMATION AEQ1 Size of mounting hole 0: 3 mm standard type 1: 3 mm without boss type Terminal 4: Solder terminal 5: PC board terminal Contact form 1: SPDT COM NO NC Actuator 0: Pin plunger 7: Leaf lever 8: Simulated leaf lever PRODUCT TYPES Terminal type (Mounting hole: 3mm standard type / 3mm without boss type) Mounting hole: 3mm standard type Mounting hole: 3mm without boss type Actuator Operating force Max. Solder terminal PC board terminal Pin plunger 1.2N AEQ10410 AEQ11510 Leaf lever 1.7N AEQ10417 AEQ11517 Simulated leaf lever 1.5N AEQ10418 AEQ11518 AECTB14E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/eAEQ1 RATING 1. Rating 100 A at 3 VDC to 100 mA 30 VDC. Min. switching capacity (Reference value*) 10 A at 1 VDC * This value is a rough indication of the lowest possible low level load at which switching is possible. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. 2. Operation environment and conditions Item Specications Ambient and storage temperature 25C to +85C (no freezing and condensing) Allowable operating speed 30 to 500 mm/sec. Max. operating cycle rate 120 cpm Note 1: When switching at low and high speeds or under vibration, or in high-temperature, high-humidity environments, life and performance may be reduced signicantly depending on the load capacity. Please consult us. Note 2: Humidity, %RH 95 Tolerance range 50 (Avoid (Avoid freezing condensation when used at when used at temperatures temperatures lower than 0C) higher than 0C) 5 25 0 85 Temperature, C 3. Electrical characteristics Between non-continuous terminals: 600 Vrms, Between each terminal and other exposed metal parts: 1,500 Vrms, Breakdown voltage (Initial) Between each terminal and ground: 1,500 Vrms (at detection current of 1 mA) Insulation resistance (Initial) Min. 100 M (at 500 V DC insulation resistance meter, Locations measured same as breakdown voltage.) Contact resistance (Initial) Max. 1 (by voltage drop 0.1 A, 6 to 8 V DC) 4. Characteristics Item Specications Switching frequency: 20 times/min. 5 3 V DC 0.1 mA (resistive load) Min. 2 10 Electrical Conduction ratio: 1:1 switching life Pushbutton operation speed: 100 mm/s 5 30 V DC 100 mA (resistive load) Min. 10 Pushbutton switching position: free position (F.P.) to total travel position (T.T.P.) Single amplitude: 0.75 mm Vibration resistance Amplitude of vibration: 10 to 55 Hz (4 minutes cycle) (malfunction vibration resistance) Direction and time: 2 hours each in X, Y and Z directions 2 Shock resistance Shock value: 294 m/s (malfunction shock resistance) Direction and time: 3 times each in X, Y and Z directions 2 Frequency of vibration: 33.3 Hz, Acceleration: 43.1 m/s Vibration resistance endurance Direction and time: 8 hours each in X, Y and Z directions Terminal strength Min. 6 N (to each direction, applied power at 1 minute) *Terminal deformation possible. Density of salt water: 5 % Salt spray resistance Temperature: 35C each 100 hours At free position (F.P.) and total travel position (T.T.P.) 45 to 40C 48 hours Heat and cold resistance 85 to 90C 48 hours Humidity resistance 40C 95% R.H. 96 hours Protection grade IP40 Notes: As long as there are no particular designations, the following conditions apply to the test environment. Ambient temperature: 5 to 35C Relative humidity: 25 to 85% R.H. Air pressure: 86 to 106 kPa AECTB14E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e