HIGH CONTACT
AM1 (NZ BASIC)
CAPACITY,
PRECISE OPERATION
SWITCHES
FEATURES TYPICAL APPLICATION
10 A High current switching capacity General industrial machinery
49.2 17.5
and high precision Medical equipment
Wide allowance of operating speed Measuring instruments
24.1
Versatile variety of actuators Transportation equipment
UL/C-UL approved Home electric appliances
Compliance with RoHS Directive
ORDERING INFORMATION
Ex. AM 1 5 0 1 F
Type of Basic
Upper body cover shape & terminal Actuators Contact
switch specifications
NZ basic 1: Flat, solder terminal Upper body cover shape 0: Standard type 0: Pin plunger F: Cadmium
(AM1) 3: Flat, screw terminal 1: Oil tight type 1: Hinge lever (leaf spring) free
Flat Grooved
switch 5: Grooved, solder terminal 3: Reversed 3: Hinge roller lever (roller, leaf, spring)
7: Grooved, screw terminal action type 4: Hinge short roller lever
4: One way type 5: Overtravel plunger
6: Compact overtravel plunger
7: Panel mount plunger
811: Panel mount roller plunger
812: Panel mount cross roller plunger
Remarks: Not every combination is available. Please refer to the following table, PRODUCT TYPES.
TERMINAL VARIATION
Standard types, reversed action types and oil tight types are available in two terminal designs, solder and screw terminals, as shown
in the above columns:
Differences in dimension between solder and screw terminals are as follows;
mm
Solder terminal Screw terminal
6.3
9.1
49.2
49.2
N.O.
CIRCUT CNONC
17.5
17.5
N.C.
CIRCUT
Terminal plate
19.8 20.2
M4 screw P0.7
04/2010AM1
PRODUCT TYPES
1. Standard type
Actuator Solder terminal Screw terminal
Pin plunger AM1100F AM1300F
Over travel plunger AM1105F AM1305F
Compact over travel plunger AM1106F AM1306F
Panel mount plunger AM1107F AM1307F
Panel mount roller plunger AM110811F AM130811F
Panel mount cross roller plunger AM110812F AM130812F
Flexible leaf lever AM1101F AM1301F
Flexible roller leaf lever AM1103F AM1303F
Rigid lever AM1501F AM1701F
Rigid short roller lever AM1504F AM1704F
Rigid roller lever AM1503F AM1703F
One way typeRigid short roller lever AM1544F AM1744F
One way typeRigid roller lever AM1543F AM1743F
Reversed action typeRigid lever AM1531F AM1731F
Reversed action type Rigid short roller lever AM1534F AM1734F
Reversed action typeRigid roller lever AM1533F AM1733F
2. Oil tight types
Actuator Solder terminal Screw terminal
Rigid lever AM1511F AM1711F
Rigid short roller lever AM1514F AM1714F
Rigid roller lever AM1513F AM1713F
Remarks: 1. Standard part number indicates UL/C-UL mark.
2. Standard packing for inner carton: 20cps.
SPECIFICATIONS
1. Contact Rating
Motor or lamp load
Resistive load Inductive load
Type Voltage
(cos = 1) (cos = 0.6 to 0.7)
N.C. N.O.
125 V AC 10 A 6 A 3 A 1.5 A
250 V AC 10 A 6 A 2 A 1 A
Standard types
One way types 480 V AC 1 A 0.5 A
Reversed action types
125 V DC 0.5 A 0.05 A
250 V DC 0.25 A 0.03 A
125 V AC 10 A 6 A 3 A 1.5 A
Oil tight types 250 V AC 10 A 6 A 2 A 1.0 A
125 V DC 0.5 A 0.05 A
2. Characteristics
Item Specications
7
Min. 2 10 (60 cpm) (at rated overtravel)
Pin plunger types (O.T.: specied value)
6
(Oil tight: Min. 1.5 10 )
Mechanical
6
Expected Min. 5 10 (60 cpm) (at rated overtravel)
Other types (O.T.: specied value)
6
life (Oil tight: Min. 1.5 10 )
5
Min. 5 10 (20 cpm) (at rated load)
Electrical (O.T.: Max.)
5
(Oil tight: Min. 1.5 10 )
Insulation resistance Min. 100 M(at 500 V DC)
Between open terminals 1,000 Vrms for 1 min.
Dielectric
Between each terminal and other exposed metal parts 2,000 Vrms for 1 min.
strength
Between each terminal and ground 2,000 Vrms for 1 min.
Contact resistance (initial) (by voltage drop, 1 A, 68 V DC) Max. 50 m
Vibration resistance (Pin plunger type) Single amplitude: 0.75 mm, 10 to 55 Hz (contact opening: max. 1 msec.)
2
Pin plunger types Min. 300 m/s (contact opening: max. 1 msec.)
Shock
2
resistance
Other types Min. 50 m/s (contact opening: max. 1 msec.)
Allowable operating speed (at no load) 0.1 to 1,000 mm/sec. (at pin plunger position)
Max. operating cycle rate (at no load) 240 cpm
Ambient temperature 25C to +80C (no freezing at low temperature)
Weight Approx. 20 to 55 g
04/2010