VDE High capacity up to 10 A AQ1 RELAYS PCB terminal type SSR FEATURES 1. 10 A high-capacity realized for PC 5. Reduced noise generation board terminal (when using heat sink) The load will operate at close to zero SSR for compact PC boards with 10 A voltage even when the input signal is capacity that is two times greater than applied during a cycle. Also, even if an our previous model. It is suitable for long- input signal is cancelled during a cycle, life, highly frequent control. the load is cut off at close to zero current. 2. VDE (EN60950-1) reinforced For this reason, hardly any noise is insulation compliant produced and radio frequency Fully satises demand for safety by interference (RFI) and electromagnetic guaranteeing compliance with interference (EMI) are kept to a minimum. EN60950-1 safety standard and featuring 6. Built-in snubber circuit prevents 3,000 V reinforced insulation (AQ3A2- malfunction. ZT4/32VDC, AQ3A2-J-ZT4/32VDC and AQ10A2-ZT4/32VDC). TYPICAL APPLICATIONS 3. Superior anti-vibration and anti- shock characteristics Printing machines The body is molded as a single unit with Packing machines ame resistant resin which makes it Automatic ticket punchers highly resistant against vibration and Terminal equipment of data processing shock, and gives it superior protection Computer peripherals from environment. The body can also be NC machines washed. RoHS compliant 4. Vertical types with SIL terminal arrangement and at types are available. 1) The vertical type is available in thicknesses of 10 mm (3 A types) and 12 mm (10 A type). Terminal arrangement is SIL in integral multiples of 2.54 mm (0.1 inch). 2) The height of the at type is 12 mm. The terminal arrangement is DIL in integral multiples of 2.54 mm. ORDERING INFORMATION AQ Load current 3 A, 10 A Load voltage 2: 75 to 250 Vrms Shape Nil: Vertical type J: Flat type Type ZT: Zero-cross AC output T: Random AC output* Control voltage 4/32 V DC: 4 to 32 V DC * Random types are available by custom order. ASCTB402E 201806-T 1AQ1 TYPES 1. AQ1 Solid State Relays Load Isolation Zero-cross function Type Load current Load voltage Control voltage Part No. Vertical 3 A 75 to 250 Vrms 4 to 32 V DC AQ3A2-ZT4/32VDC 1 AC Phototriac coupler Zero-cross* Flat 3 A 75 to 250 Vrms 4 to 32 V DC AQ3A2-J-ZT4/32VDC 2 Vertical 10 A* 75 to 250 Vrms 4 to 32 V DC AQ10A2-ZT4/32VDC Standard packing: Carton 20 pcs., Case 200 pcs. Notes: *1. Random type also available. Please contact our sales ofce. *2. 5 A without heat sink 2. Heat sink for AQ1 solid state relay Product name Part No. Heat sink for AQ10A2-ZT4/32VDC AQ-HS-5A Standard packing: Carton 20 pcs., Case 200 pcs. SPECIFICATIONS 1. Rating (Ambient temperature: 20C 68F, Ripple factor: less than 1%) Part No. AQ3A2-ZT4/32V DC AQ10A2-ZT4/32V DC Remarks Item AQ3A2-J-ZT4/32V DC Control voltage 4 to 32 V DC Input impedance 1 Input side * Input current, max. 20 mA Drop-out voltage, min. 1.0 V 2 5 Refer to REFERENCE DATA 1. Load Max. load current* 3 A 10 A* current vs. ambient temperature Load voltage 75 to 250 Vrms characteristics. Frequency 45 to 65 Hz 3 Non-repetitive surge current* 100 A AC: In one cycle at 60 Hz Load side Max. OFF-state leakage 5 mA AC: at 200 V, 60 Hz current Max. ON-state voltage drop 1.6 V At Max. carrying current 4 Min. load current* 50 mA Notes: *1. Refer to REFERENCE DATA 3. Input current vs. input voltage characteristics. *2. Refer to REFERENCE DATA 1. Load current vs. ambient temperature. *3. Refer to REFERENCE DATA 2. Non-repetitive surge current vs. carrying time. *4. When load current is below the rating, refer to Cautions for Use of Solid State Relays. *5. When heat sink (AQ-HS-5A) is installed. The max. load current is 5 A when heat sink is not installed. 2. Characteristics (Ambient temperature: 20C 68F, Ripple factor: less than 1%) Part No. AQ3A2-ZT4/32V DC AQ10A2-ZT4/32V DC Remarks Item AQ3A2-J-ZT4/32V DC Operate time, Max. 1/2 cycle of voltage sine wave +1 ms Release time, Max. 1/2 cycle of voltage sine wave +1 ms Insulation resistance, Min. 100 M for input, output and case at 500 V DC 4,000 Vrms between input and output Breakdown voltage For 1 minute 2,500 Vrms between input, output and case Destructive 10 to 55 Hz at double amplitude of 2 mm 1 hour for X, Y, Z axis Vibration resistance Functional 10 to 55 Hz at double amplitude of 2 mm 10 minutes for X, Y, Z axis 2 Destructive Min. 980 m/s 100 G 5 times each for X, Y, Z axis Shock resistance 2 Functional Min. 980 m/s 100 G 4 times each for X, Y, Z axis Ambient temperature 30 to +80C 22 to +176F Non-condensing at low temperatures Storage temperature 30 to +100C 22 to +212F Non-condensing at low temperatures Operational method Zero-cross (Turn-ON and Turn-OFF) ASCTB402E 201806-T 2