Standard type: Reinforced type: Normally closed DIP6-pin type HE 1 Form B Low on-resistance with 250V/400V load voltage (AQV45, AQV454H) FEATURES 8.8 6.4 1. 1 Form B (Normally-closed) type 3. High sensitivity and low on- .346 .252 with low on-resistance resistance 3.9 .154 This has been achieved thanks to the Can control max. 0.2 A load current with built-in MOSFET processed by our 5 mA input current. Low on-resistance of 6.4 8.8 .252 proprietary method, DSD (Double- typ. 5.5 (AQV453)346 3.6 diffused and Selective Doping) method. 4. Reinforced insulation 5,000 V type .142 Height includes also available. standoff Cross section of the normally-closed type of More than 0.4 mm .016 inch internal power MOS insulation distance between inputs and mm inch Passivation membrane Intermediate outputs. Conforms to IEC950 (reinforced Source electrode Gate electrode insulating membrane insulation). 1 6 Gate oxidation N+ N+ N+ N+ 2 5 P+ P+ membrane 3 4 N TYPICAL APPLICATIONS Drain electrode Security equipment N+ High-speed inspection machines Measuring instruments RoHS compliant 2. Controls low-level analog signals Telephone equipment PhotoMOS feature extremely low closed- Sensing equipment circuit offset voltage to enable control of low-level analog signals without distortion. TYPES Output rating* Part No. Packing quantity Through hole Surface-mount terminal terminal I/O isolation Package Load Load Tape and reel packing style voltage current Tube packing style Tube Tape and reel Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side 250 V 200 mA AQV453 AQV453A AQV453AX AQV453AZ 1 tube contains: 1,500 V AC AC/DC 50 pcs. DIP6-pin AQV454 AQV454A AQV454AX AQV454AZ 1,000 pcs. dual use 1 batch contains: 400 V 150 mA 500 pcs. Reinforced AQV454H AQV454HA AQV454HAX AQV454HAZ 5,000 V AC * Indicate the peak AC and DC values. Note: The surface mount terminal indicator A and the packing style indicator X or Z are not marked on the device. ASCTB146E 201404-T 1HE 1 Form B (AQV45, AQV454H) RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Type of Item Symbol AQV453(A) AQV454(A) AQV454H(A) Remarks connection LED forward current IF 50 mA LED reverse voltage VR 5 V Input Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 250 V 400 V A 0.2 A 0.15 A A connection: Peak AC, DC Continuous load current IL B 0.3 A 0.18 A B, C connection: DC Output C 0.4 A 0.25 A Peak load current IPEAK 0.6 A 0.5 A A connection: 100 ms (1 shot), VL = DC Power dissipation POUT 360 mW Total power dissipation PT 410 mW I/O isolation voltage Viso 1,500 V AC 5,000 V AC Operating Topr 40C to +85C 40F to +185F Non-condensing at low temperatures Temperature limits Storage Tstg 40C to +100C 40F to +212F 2. Electrical characteristics (Ambient temperature: 25C 77F) Type of Item Symbol AQV453(A) AQV454(A) AQV454H(A) Remarks connection Typical 1 mA 0.9 mA 1.4 mA LED operate (OFF) current IFoff IL = Max. Maximum 3 mA Minimum 0.4 mA Input LED reverse (ON) current IFon IL = Max. Typical 0.9 mA 0.8 mA 1.3 mA Typical 1.25 V (1.14 V at IF=5 mA) LED dropout voltage VF IF = 50 mA Maximum 1.5 V IF = 0 mA Typical 5.5 11 Ron A IL= Max. Maximum 8 16 Within 1 s on time IF = 0 mA Typical 2.7 6.3 On resistance Ron B IL= Max. Maximum 4 8 Within 1 s on time Output IF = 0 mA Typical 1.4 3.1 Ron C IL = Max. Maximum 2 4 Within 1 s on time IF= 5 mA Off state leakage current Maximum ILeak 1 A1 A 10 A VL= Max. Typical 1.52 ms 1.2 ms 1.8 ms IF = 0 mA 5 mA Operate (OFF) time* Toff IL = Max. Maximum 3 ms 2.0 ms 3.0 ms Typical 0.4 ms 0.36 ms 0.4 ms IF = 5 mA 0 mA Reverse (ON) time* Ton Transfer IL = Max. Maximum 1 ms characteristics Typical 1.3 pF f = 1 MHz I/O capacitance Ciso VB = 0 V Maximum 3 pF Initial I/O isolation resistance Minimum Riso 1,000 M 500 V DC *Operate/Reverse time Input Output 10% 90% Toff Ton RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper device operation and resetting. Item Symbol Recommended value Unit Standard type: 5 Input LED current IF mA Reinforced insulation type: 5 to 10 These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. ASCTB146E 201404-T 2