AQW210HLAZ Panasonic

GU 2 Form A Current Limiting (AQW210HL)TESTING Two output type with current limiting and GU 2 Form A reinforced insulation Current Limiting (AQW210HL) FEATURES 6.4 9.86 1. Current Limiting Function 6. High sensitivity and high speed .252 .388 To control an over current from owing, response. 3.2 .126 the current limit function has been Can control max. 0.12 A load current with realized. It keeps an output current at a 5 mA input current. This enables fast 6.4 9.86 constant value when the current reaches operation speed of typ. 0.5 ms .252 .388 2.9 a specied current limit value. 7. Low-level off state leakage current .114 2. Enhances the capability of surge resistance between output terminals The current limit function controls the ON mm inch TYPICAL APPLICATIONS time surge current to enhance the capability of surge resistance between Telephone equipment 1 8 output terminals. Modem 2 7 3. Reinforced insulation of 5,000 V More than 0.4 mm internal insulation 3 6 distance between inputs and outputs. 4 5 Con-forms to EN41003, EN60950 (reinforced insulation). 4. Applicable for 2 Form A use as well as two independent 1 Form A use. RoHS compliant 5. Controls low-level analog signals TYPES Part No. Output rating* Packing quantity Through hole Surface-mount terminal terminal I/O isolation Package voltage Tape and reel packing style Load Load Tube packing style Tube Tape and reel Picked from the Picked from the voltage current 1/2/3/4-pin side 5/6/7/8-pin side 1 tube contains: AC/DC Reinforced 50 pcs. 350 V 100 mA DIP8-pin AQW210HL AQW210HLA AQW210HLAX AQW210HLAZ 1,000 pcs. dual use 5,000 V AC 1 batch contains: 500 pcs. *Indicate the peak AC and DC values. Note: The surface mount terminal shape indicator A and the packing style indicator X or Z are not marked on the device. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item Symbol AQW210HL(A) Remarks LED forward current IF 50 mA LED reverse voltage VR 5 V Input Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 350 V Peak AC, DC Output Continuous load current IL 0.1 A (0.12 A) ( ): in case of using only 1 channel Power dissipation Pout 800 mW Total power dissipation PT 850 mW I/O isolation voltage Viso 5,000 V AC Operating Topr 40C to +85C 40F to +185F Non-condensing at low temperatures Temperature limits Storage Tstg 40C to +100C 40F to +212F ASCTB56E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/eGU 2 Form A Current Limiting (AQW210HL) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol AQW210HL(A) Condition Typical 1.2 mA LED operate current IFon IL = Max. Maximum 3.0 mA Minimum 0.4 mA Input LED turn off current IFoff IL = Max. Typical 1.1 mA Minimum 1.25 (1.14 V at IF = 5 mA) LED dropout voltage VF IF = 50 mA Typical 1.5 V IF = 5 mA Typical 20 On resistance Ron IL = Max. Maximum 25 Within 1 s on time Output IF = 0 mA Off state leakage current Maximum ILeak 1A VL = Max. Current limit Typical 0.18 A IF = 5 mA Typical 0.5 ms IF = 5 mA Turn on time* Ton IL = Max. Maximum 2.0 ms Typical 0.08 ms IF = 5 mA Turn off time* Toff Transfer IL = Max. Maximum 1.0 ms characteristics Typical 0.8 pF f = 1 MHz I/O capacitance Ciso VB = 0 V Maximum 1.5 pF Initial I/O isolation resistance Minimum Riso 1,000 M 500 V DC *Turn on/Turn off time Input 90% 10% Output Ton Toff RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper device operation and resetting. Item Symbol Recommended value Unit Input LED current IF 5 to 10 mA For Dimensions. For Schematic and Wiring Diagrams. For Cautions for Use. These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. For more information. REFERENCE DATA 1. Load current vs. ambient temperature 2. On resistance vs. ambient temperature 3. Turn on time vs. ambient temperature characteristics characteristics characteristics Allowable ambient temperature: 40C to +85C Measured portion: between terminals 5 and 6, 7 and 8 LED current: 5 mA Load voltage: Max.(DC) 40F to +185F LED current: 5 mA Load voltage: Max. (DC) Continuous load current: Max.(DC) Continuous load current: Max.(DC) 200 50 3 2.5 40 150 Using only 1 channel 2 30 Using 2 channels 100 1.5 20 1 50 10 0.5 0 0 0 40 20 020 40 60 80 85 100 40 20 020 40 60 80 85 40 20 020 40 60 80 85 Ambient temperature, C Ambient temperature, C Ambient temperature, C ASCTB56E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e Load current, mA On resistance, Turn on time, ms