RF 2 Form A Low on-resistance (AQW22N) DIP8-pin type featuring low on-resistance with RF 2 Form A 200V/400V load voltage Low on-resistance (AQW22N) AQW22N FEATURES TYPICAL APPLICATIONS 6.4 1. 2-channels (Form A) type with high Measuring instruments 9.78 .252 .385 response speed, low leakage current Scanner, IC checker, Board tester, etc. 3.90.2 .154.008 and low on-resistance. 2. Applicable for 2 Form A use as well as two independent 1 Form A use 6.4 9.78 .252 3. Low capacitance between output .385 3.60.2 Height includes .142.008 terminals ensures high response standoff speed: The capacitance between output terminals is small typ. 10 pF. CAD DataCAD Data This enables for a fast operation speed of mm inch typ. 0.2 ms. 4. High sensitivity and low on- 1 8 resistance: Max. 0.07 A of load current can be 2 7 controlled with input current of 5 mA. 3 6 The on-resistance is less than our 4 5 conventional models. 5. Low-level off state leakage current 6. Controls low-level analog signals: PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. TYPES Part No. Output rating* Packing quantity Through hole Surface-mount terminal terminal Package Tape and reel packing style Load Load Tube packing style Tube Tape and reel Picked from the Picked from the voltage current 1/2/3-pin side 4/5/6-pin side 1 tube contains: 200 V 50 mA AQW227N AQW227NA AQW227NAX AQW227NAZ AC/DC 50 pcs. DIP8-pin 1,000 pcs. dual use 1 batch contains: 400 V 40 mA AQW224N AQW224NA AQW224NAX AQW224NAZ 500 pcs. *Indicate the peak AC and DC values. Note: The surface mount terminal indicator A and the packing style indicator X or Z are not marked on the relay. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77 F) Item Symbol AQW227N(A) AQW224N(A) Remarks LED forward current IF 50 mA LED reverse voltage VR 5 V Input Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 200 V 400 V 0.05 A 0.04 A Peak AC, DC Continuous load current IL (0.07 A) (0.05 A) ( ): in case of using only 1 channel Output A connection: 100 ms (1 shot), Peak load current Ipeak 0.15 A 0.12 A VL = DC Power dissipation Pout 800 mW Total power dissipation PT 850 mW I/O isolation voltage Viso 1,500 V AC Non-condensing at low Operating Topr 40C to +85 C 40F to +185F Temperature temperatures limits Storage Tstg 40 C to +100C 40F to +212F ds x615 en aqw22n: 010611J 1RF 2 Form A Low on-resistance (AQW22N) 2. Electrical characteristics (Ambient temperature: 25 C 77 F) Item Symbol AQW227N(A) AQW224N(A) Remarks Typical 0.9 mA LED operate current IFon IL = Max. Maximum 3.0 mA Minimum 0.4 mA Input LED turn off current IFoff IL = Max. Typical 0.8 mA Typical 1.25 V (1.14 V at IF = 5 mA) LED dropout voltage VF IF = 50 mA Maximum 1.5 V IF = 5 mA Typical 30 70 On resistance Ron IL = Max. Maximum 50 100 Within 1 s on time IF = 0 Typical 10 pF Output Output capacitance Cout VB = 0 Maximum 15 pF f = 1 MHz IF = 0 Off state leakage current Maximum ILeak 10 nA (1 nA or less)* VL = Max. Typical 0.2 ms IF = 5 mA Turn on time* Ton IL = Max. Maximum 0.5 ms Typical 0.08 ms IF = 5 mA Turn off time* Toff Transfer IL = Max. Maximum 0.2 ms characteristics Typical 0.8 pF f = 1 MHz I/O capacitance Ciso VB = 0 Maximum 1.5 pF Initial I/O isolation resistance Minimum Riso 1,000 M 500 V DC * Available as custom orders (1 nA or less) **Turn on/Turn off time Input 90% Output 10% Ton Toff RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Symbol Recommended value Unit Input LED current IF 5mA Dimensions Schematic and Wiring Diagrams Cautions for Use These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic technical representative. Please refer to our information on PhotoMOS Relays for Automotive Applications. 2 ds x615 en aqw22n: 010611J