AQW414EAZ Panasonic

PhotoMOS 2 Form B GE Normally closed type with reinforced insulation FEATURES Reinforced insulation of 5,000 V Applicable for 2 Form B use as well as two 9.86 6.4 6.4 9.86 2.9 3 2 . independent 1 Form B use Controls low-level analog signals High sensitivity and high speed response (Height includes standoff) Low-level off state leakage current TYPICAL APPLICATIONS 1 8 Modem 2 7 Telephone equipment Electricity, plant equipment 3 6 Security equipment Sensing equipment 4 5 Note: Please contact our sales representative for automotive applications of PhotoMOS. (Unit: mm) TYPES 1 Output rating* Part No. Packing quantity Through hole I/O isolation Surface mount terminal Category terminal Load Load voltage Tube Tape and reel voltage current Tape and reel Tape and reel Tube packing style 2 2 packing style X* packing style Z* AC/DC 5,000 Vrms 1-tube: 50 pcs. 1-reel: 1,000 pcs. 400 V 100 mA AQW414EH AQW414EHA AQW414EHAX AQW414EHAZ dual use (Reinforced) Outer carton: 500 pcs. Outer carton: 1,000 pcs. Note: The surface mount terminal shape indicator A and the packing style indicator X or Z are not marked on the device. (Ex. the label for product number AQW414EHAX is AQW414EH.) *1.Indicate the peak AC and DC values. *2.Tape and reel packing style X: picked from the 1/2/3/4-pin side, tape and reel packing style Z: picked from the 5/6/7/8-pin side. Panasonic Corporation 2019 industrial.panasonic.com/ac/e/ ASCTB54E 201912 2019.12 1 PhotoMOS GE 2 Form B RATING Absolute maximum ratings (Ambient temperature: 25C) Item Symbol AQW414EH (A) Remarks LED forward current IF 50 mA LED reverse voltage VR 5 V f = 100 Hz, Peak forward current IFP 1 A Duty Ratio = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 400 V Peak AC, DC Continuous load current IL 0.1 A (0.13 A) ( ): in case of using only 1 channel 100 ms (1 shot), Peak load current Ipeak 0.3 A VL = DC Power dissipation Pout 800 mW Total power dissipation PT 850 mW I/O isolation voltage Viso 5,000 Vrms (Avoid icing and Ambient temperature (Operating) T -40 to +85C opr condensation) Ambient temperature (Storage) Tstg -40 to +100C Electrical characteristics (Ambient temperature: 25C) Item Symbol AQW414EH (A) Condition Typical 1.3 mA LED operate IFoff IL = Max. (OFF) current Maximum 3.0 mA Minimum 0.4 mA LED reverse (ON) IFon IL = Max. current Typical 1.2 mA Typical 1.25 V (1.14 V at IF = 5 mA) LED dropout VF IF = 50 mA voltage Maximum 1.5 V IF = 0 mA Typical 26 On resistance Ron IL = Max. Maximum 35 Within 1 s Off state leakage IF = 5 mA Maximum ILeak 10 A current VL = Max. Typical 0.8 ms Operate (OFF) IF = 0 mA5 mA T off time* IL = Max. Maximum 3.0 ms Typical 0.2 ms Reverse (ON) IF = 5 mA0 mA Ton time* IL = Max. Maximum 1.0 ms Typical 0.8 pF f = 1 MHz I/O capacitance Ciso VB = 0 V Maximum 1.5 pF Initial I/O isolation Minimum Riso 1,000 M 500 V DC resistance *Operate/Reverse time Input Output 10% 90% To Ton Recommended operating conditions (Ambient temperature: 25C) Please use under recommended operating conditions to obtain expected characteristics. Number of Item Symbol used Min. Max. Unit channels LED current IF - 5 30 mA Load voltage (Peak AC) VL - - 320 V AQW414EH (A) 1 ch 0.13 Continuous load current IL - A 2 ch 0.1 Panasonic Corporation Electromechanical Control Business Division Panasonic Corporation 2019 ASCTB54E 201912 2 industrial.panasonic.com/ac/e/ Transfer characteristics Output Input Output Input