CR type SSOP package 60 V, 80 V and 100 V RF SSOP 1 Form A CR load voltage (AQY22V) FEATURES 2.65 4.45 1. Miniature SSOP package .104 .175 (Compared to SOP 4-pin models, volume ratio can be reduced 1.80 .071 by approximately 53%.) mm inch 2. Load voltage: 60 V, 80 V and 100 V 3. Low CR 1 4 Low on resistance and low output capacitance available 60 V load voltage Output capacitance: Typ. 27 pF, On resistance: Typ. 0.8 80 V load voltage 2 3 Output capacitance: Typ. 4.5 pF, On resistance: Typ. 10.5 100 V load voltage Output capacitance: Typ. 5.8 pF, On resistance: Typ. 8.8 4. Turn on time RoHS compliant 80 V and 100 V load voltage type: Typ. 0.05 ms TYPICAL APPLICATIONS 1. Measuring and testing equipment Semiconductor testing equipment, Probe cards, Datalogger, Board tester and other testing equipment 2. Telecommunication and broadcasting equipment 3. Medical equipment Ultrasonic wave diagnostic machine 4. Multi-point recorder Data logger, Warping and Thermocouple, etc. *Does not support automotive applications. TYPES 1 2 Output rating* Part No. (Tape and reel packing style)* Packing quantity in the Type tape and reel Load voltage Load current Picked from the 1 and 4-pin side Picked from the 2 and 3-pin side 60 V 400 mA AQY222R2VY AQY222R2VW AC/DC dual use 80 V 120 mA AQY225R2VY AQY225R2VW 3,500 pcs. 100 V 120 mA AQY225R3VY AQY225R3VW Notes: *1. Indicate the peak AC and DC values. *2. Only tape and reel package is available. Packing quantity of 1,000 pieces is possible. Please consult us. For space reasons, the three initial letters of the part number AQY, the package (SSOP) indication V, and the packaging style Y or W are not marked on the device. ASCTB34E 201703-T 1RF SSOP 1 Form A CR (AQY22V) RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item Symbol AQY222R2V AQY225R2V AQY225R3V Remarks LED forward current IF 50 mA LED reverse voltage VR 5 V Input side Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1% Power dissipation Pin 75 mW Load voltage (peak AC) VL 60 V 80 V 100 V Continuous load current IL 0.4 A 0.12 A Peak AC, DC Output side Peak load current Ipeak 1.2 A 0.3 A 100 ms (1shot), VL = DC Power dissipation Pout 250 mW Total power dissipation PT 300 mW I/O isolation voltage Viso 1,500 Vrms Operating Topr 40 to +85C 40 to +185F (Non-icing at low temperatures) Ambient temperature Storage Tstg 40 to +100C 40 to +212F 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol AQY222R2V AQY225R2V AQY225R3V Condition Typical 0.5 mA LED operate IFon AQY222R2V: IL = 400 mA current Maximum 3.0 mA AQY225R2V: IL = 80 mA Minimum 0.1 mA LED turn off AQY225R3V: IL = 80 mA Input IFoff current Typical 0.45 mA Typical 1.32 V (1.14 V at IF = 5 mA) LED dropout VF IF = 50 mA voltage Maximum 1.5 V AQY222R2V: IF = 5 mA, IL = 400 mA Typical 0.8 10.5 8.8 AQY225R2V: IF = 5 mA, IL = 80 mA On resistance Ron AQY225R3V: IF = 5 mA, IL = 80 mA Maximum 1.25 15 14 Within 1 s Output Typical 27 pF 4.5 pF 5.8 pF Output Cout IF = 0 mA, VB = 0 V, f = 1 MHz capacitance Maximum 40 pF 6 pF 8 pF Typical 0.01 nA Off state ILeak IF = 0 mA, VL = Max. leakage current Maximum *10 nA Typical 0.15 ms 0.05 ms Turn on time** Ton AQY222R2V: IF = 5 mA, VL = 10 V, RL = 100 Maximum 0.5 ms AQY225R2V: IF = 5 mA, VL = 10 V, RL = 125 Typical 0.08 ms 0.05 ms AQY225R3V: IF = 5 mA, VL = 10 V, RL = 125 Turn off time** Toff Transfer Maximum 0.2 ms characteris- Typical 0.8 pF tics I/O capacitance Ciso f = 1 MHz, VB = 0 V Maximum 1.5 pF Initial I/O isolation Minimum Riso 1,000 M 500 V DC resistance Note: Variation possible through combinations of output capacitance and on resistance. For more information, please contact our sales ofce in your area. *Available as custom orders (1 nA or less) **Turn on/Turn off time Input 90% 10% Output Ton Toff 3. Recommended operating conditions (Ambient temperature: 25C 77F) Please use under recommended operating conditions to obtain expected characteristics. Item Symbol Min. Max. Unit LED current IF 530 mA Load voltage (Peak AC) VL 30 V AQY222R2V Continuous load current IL 0.4 A Load voltage (Peak AC) VL 40 V AQY225R2V Continuous load current IL 0.12 A Load voltage (Peak AC) VL 50 V AQY225R3V Continuous load current IL 0.12 A These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. ASCTB34E 201703-T 2
