AQZ204 Panasonic

PhotoMOS 1 Form A Power Slim type with high capacity up to 4A DC load type also available FEATURES Slim SIL4-pin package 3.5 Extremely low on-resistance 21 Control low-level signal 12.5 Low-level off state leakage current of max. 10 A High I/O isolation voltage of 2,500 V Eliminates the need for a counter electromotive (Height includes standoff) protection diode in the drive circuit on the input side Eliminates the need for a power supply to drive the power MOSFET No restriction on mounting direction Low thermoelectromotive force Neither noise nor arc at contact Sockets are also available + 1 2 3 4 1 2 3 4 DC type AC/DC type TYPICAL APPLICATIONS Traffic signals (Unit: mm) Measuring instruments Industrial machines Note: Please contact our sales representative for automotive applications of PhotoMOS. TYPES Output rating* Packing quantity Category Part No. Inner carton Load voltage Load current Outer carton (1-tube) 60 V 4.0 A AQZ102 100 V 2.6 A AQZ105 DC only 200 V 1.3 A AQZ107 400 V 0.7 A AQZ104 25 pcs. 500 pcs. 60 V 3.0 A AQZ202 100 V 2.0 A AQZ205 AC/DC dual use 200 V 1.0 A AQZ207 400 V 0.5 A AQZ204 Note: Please refer to the Cautions for use regarding the recommended operation load voltage. *Load voltage and current of AC/DC type: Peak AC/DC. Load voltage and current of DC type: DC. Panasonic Corporation 2019 industrial.panasonic.com/ac/e/ ASCTB150E 201912 2019.12 1 PhotoMOS Power 1 Form A RATING DC type Absolute maximum ratings (Ambient temperature: 25C) Item Symbol AQZ102 AQZ105 AQZ107 AQZ104 Remarks LED forward current IF 50 mA LED reverse voltage VR 5 V f = 100 Hz, Peak forward current IFP 1 A Duty Ratio = 0.1% Power dissipation Pin 75 mW Load voltage (DC) VL 60 V 100 V 200 V 400 V Continuous load current (DC) IL 4.0 A 2.6 A 1.3 A 0.7 A 100 ms (1 shot), Peak load current Ipeak 9.0 A 6.0 A 3.0 A 1.5 A V = DC L Power dissipation P 1.35 W out Total power dissipation P 1.35 W T I/O isolation voltage Viso 2,500 Vrms (Avoid icing and Ambient temperature (Operating) Topr -40 to +85C condensation) Ambient temperature (Storage) Tstg -40 to +100C Electrical characteristics (Ambient temperature: 25C) Item Symbol AQZ102 AQZ105 AQZ107 AQZ104 Condition Typical 1.0 mA LED operate IL = 100 mA IFon current VL = 10 V Maximum 3.0 mA Minimum 0.4 mA LED turn off IL = 100 mA IFoff current VL = 10 V Typical 0.9 mA Typical 1.25 V(1.16 V at I = 10 mA) F LED dropout V I = 50 mA F F voltage Maximum 1.5 V I = 10 mA F Typical 0.05 0.081 0.34 1.06 On resistance Ron IL = Max. Maximum 0.09 0.17 0.55 1.6 Within 1 s Off state leakage IF = 0 mA Maximum ILeak 10 A current VL = Max. IF = 10 mA Typical 1.66 ms 1.89 ms 0.83 ms 1.01 ms IL = 100 mA Maximum 5.0 ms VL = 10 V Turn on time* Ton IF = 5 mA Typical 3.79 ms 4.50 ms 1.75 ms 2.34 ms IL = 100 mA Maximum 10.0 ms VL = 10 V IF = 5 mA or 10 mA Typical 0.15 ms 0.19 ms 0.08 ms 0.08 ms Turn off time* Toff IL = 100 mA Maximum 3.0 ms VL = 10 V Typical 0.8 pF f = 1 MHz I/O capacitance Ciso VB = 0 V Maximum 1.5 pF Initial I/O isolation Minimum R 1,000 M 500 V DC iso resistance I = 10 mA F Max. operating duty = 50% Maximum - 0.5 cps frequency I = Max. L VL = Max. *Turn on/Turn off time Input 90% 10% Output Ton To Panasonic Corporation Electromechanical Control Business Division Panasonic Corporation 2019 ASCTB150E 201912 2 industrial.panasonic.com/ac/e/ Transfer characteristics Output Input Output Input