PM4H-A/S/M PM4H-A DIN48 SIZE MULTI-RANGE PM4H-S ANALOG TIMER PM4H-M UL File No.: E122222 CSA File No.: LR39291 Features 1. 100-240V AC free-voltage input, 48-125V DC type available 48 1.890 2. Short body 62.5mm 2.461 inch (screw terminal type) 3. Front panel of IP65 type is protected against water-splash and dust 4. Built-in Screw terminals 62.5 Screw terminal type is used for easy wiring and reducing additional cost for 2.461 48 1.890 accessories. mm inch 5. 0 setting instantaneous output operation 6. Multiple time ranges 1 s to 500 h (Max.) Screw 7. 8 different operation modes: (PM4H-A) Pin type terminal type 8. Compliant with UL/CSA, CE and LLOYD RoHS Directive compatibility information PM4H-A/S/M Time range PM4H-A/PM4H-S/PM4H-M Time unit sec min hrs 10h All types of PM4H timer have multi-time Scale range. 1 0.1s to 1s 0.1 min to 1 min 0.1h to 1h 1.0h to 10h 16 time ranges are selectable. 5 0.5s to 5s 0.5 min to 5 min 0.5h to 5h 5h to 50h Control 1s to 500h (Max. range) is controlled. time range 10 1.0s to 10s 1.0 min to 10 min 1.0h to 10h 10h to 100h 50 5s to 50s 5 min to 50 min 5h to 50h 50h to 500h Note: 0 setting is for instantaneous output operation. Specifications Type PM4H-A PM4H-S PM4H-M Item Rated operating voltage 100 to 240V AC, 48 to 125V DC, 12V DC, 24V AC/DC Rated frequency 50/60Hz common (AC operating type) Approx. 10VA (100 to 240V AC) Rated power consumption Approx. 2.5VA (24V AC) Approx. 1.5W (12V DC, 24V DC, 48 to 125V DC) Rated control capacity 5A 250V AC (resistive load) Pulse ON-delay Rating Power ON-delay Pulse Flicker Power Flicker Pulse ON-Flicker Power ON-flicker Operating mode Differential ON/OFF-delay (1) (2) Power ON-delay Power One-shot Signal OFF-delay Power One-cycle Pulse One-shot (with instantaneous contact) Pulse One-cycle Time range 1s to 500h (Max.) 16 time ranges switchable Operating time fluctuation 0.3% (power off time change at the range of 0.1s to 1h) Time Setting error 5% (Full-scale value) accuracy Voltage error 0.5% (at the operating voltage changes between 85 to 110%) Note:) Temperature error 2% (at 20C ambient temp. at the range of 10 to +50C +14 to +122F) Timed-out 1 Form C Contact arrangement Timed-out 2 Form C Instantaneous 1 Form C Contact Contact resistance (Initial value) Max. 100m (at 1A 6V DC) Contact material Silver alloy Au flash on Silver alloy 7 Mechanical (contact) 210 Life 5 Electrical (contact) 10 (at rated control capacity) Allowable operating voltage range 85 to 110% of rated operating voltage (at 20C coil temp.) Between live and dead metal parts Between input and output Insulation resistance (Initial value) Min. 100M (At 500V DC) Between contacts of different poles Between contacts of same pole Electrical 2,000Vrms for 1 min Between live and dead metal parts function 2,000Vrms for 1 min Between input and output Breakdown voltage (Initial value) 2,000Vrms for 1 min Between contacts of different poles 1,000Vrms for 1 min Between contacts of same pole Min. power off time 100ms Max. temperature rise 55C 131F 65C 149F Functional 10 to 55Hz: 1 cycle/min double amplitude of 0.25mm (10min on 3 axes) Vibration resistance Destructive 10 to 55Hz: 1 cycle/min double amplitude of 0.375mm (1h on 3 axes) Mechanical 2 function Functional Min. 98m/s (4 times on 3 axes) Shock resistance 2 Destructive Min. 980m/s (5 times on 3 axes) Ambient temperature 10 to +50C +14 to +122F Ambient humidity 30 to 85%RH (at 20C 68F, non-condensing) Operating condition Atmospheric pressure 860 to 1,060hPa Ripple factor (DC type) 20% Protective construction IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type> Others 100g 3.527 oz (Pin type) Weight 110g 3.880 oz (Screw terminal type) Note: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage (within 5% ripple factor for DC), 20C 68F ambient temperature, and 1s power off time. 2) For the 1s range, the tolerance for each specification becomes 10ms. All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd.