1.8mm 2.2mm 1.8 mm 2.2 mm For board-to-FPC Narrow Pitch Connectors A35US (0.35mm pitch) FEATURES Proprietary Fine Fitting 1. 0.6 mm Mated Height with 2.2 mm construction width. High unmating force is maintained 2. Proprietary Fine Fitting while soldering terminals on socket Construction and header are held in place. Soldering terminal Our proprietary design provides a on header comfortable and tact feel while providing a secure connection. Soldering terminalt Socket on socket Top view Soldering terminals Cross section showing mating Socket Header at each corner Fine Fitting structure with soldering terminals 3. A slim 2.2 mm (width) design RoHS compliant provides space-saving benets. The actual footprint is reduced by 20%, when compared to a 40 pin A4S. 4. structure provides a slim and low-prole design resistant to various environmental Header conditions. 5. Soldering terminals enhance Bottom view mounting strength. Soldering terminals at each corner APPLICATIONS Board-to-FPC connections in hand held devices that require compact Fine Fitting structure design and enhanced functionality. ORDERING INFORMATION AXG 0 4 7: Socket 8: Header Number of pins (2 digits) Mated height <Socket>/<Header> 0: 0.6 mm Functions 4: Without positioning bosses / Fine fitting construction Surface treatment (Contact portion / Terminal portion) <Socket> 7: Base: Ni plating, Surface: Au plating (for Ni barrier available) <Header> 4: Base: Ni plating, Surface: Au plating ACCTB65E 201608-T 1 6.00 mm (20 pin) 0.35 mm 5.30 mm (20 pin)Narrow pitch connectors A35US (0.35mm pitch) PRODUCT TYPES Part number Packing Mated height Number of pins Socket Header Inner carton (1-reel) Outer carton 10 AXG710047 AXG810044 12 AXG712047 AXG812044 16 AXG716047 AXG816044 20 AXG720047 AXG820044 24 AXG724047 AXG824044 0.6mm 30 AXG730047 AXG830044 10,000 pieces 20,000 pieces 34 AXG734047 AXG834044 40 AXG740047 AXG840044 44 AXG744047 AXG844044 50 AXG750047 AXG850044 60 AXG760047 AXG860044 Notes: 1. Order unit: For volume production: 1-inner carton (1-reel) units For samples, please contact our sales ofce. 2. Please contact us for connectors having a number of pins other than those listed above. SPECIFICATIONS 1. Characteristics Item Specications Conditions Rated current 0.30A/pin contact (Max. 5 A at total pin contacts) Rated voltage 60V AC/DC No short-circuiting or damage at a detection current of 1 mA Electrical Dielectric strength 150V AC for 1 min. when the specied voltage is applied for one minute. characteristics Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.) Based on the contact resistance measurement method Contact resistance Max. 90m specied by JIS C 5402. Composite insertion force Max. 1.300N/pin contact pin contacts (initial) Mechanical Composite removal force Min. 0.215N/pin contact pin contacts characteristics Contact holding force Measuring the maximum force. Min. 0.20N/pin contact (Socket contact) As the contact is axially pull out. Ambient temperature 55C to +85C No icing or condensation. Peak temperature: 260C or less (on the surface of Infrared reow soldering the PC board around the connector terminals) Soldering heat resistance 300C within 5 sec. 350C within 3 sec. Soldering iron 55C to +85C (product only) Storage temperature No icing or condensation. 40C to +50C (emboss packing) Conformed to MIL-STD-202F, method 107G Order Temperature (C) Time (minutes) 0 5 cycles, 1 553 30 Thermal shock resistance insulation resistance min. 100M, 2 Max. 5 (header and socket mated) Environmental +3 contact resistance max. 90m 3 85 0 30 characteristics 4 Max. 5 0 553 Conformed to IEC60068-2-78 Humidity resistance 120 hours, insulation resistance min. 100M, Bath temperature 40C2C, (header and socket mated) contact resistance max. 90m humidity 90% to 95% R.H. Conformed to IEC60068-2-11 Saltwater spray resistance 24 hours, insulation resistance min. 100M, Bath temperature 35C2C, (header and socket mated) contact resistance max. 90m saltwater concentration 5%1% Bath temperature 40C2C, H2S resistance 48 hours, contact resistance max. 90m gas concentration 3 ppm 1 ppm, (header and socket mated) humidity 75% to 80% R.H. Lifetime Repeated insertion and removal speed of max. 200 times/ Insertion and removal life 30 times characteristics hours Unit weight 60 pin contacts Socket: 0.02g Header: 0.01g 2. Material and surface treatment Part name Material Surface treatment Molded LCP resin portion (UL94V-0) Contact portion: Base: Ni plating, Surface: Au plating Terminal portion: Base: Ni plating, Surface: Au plating (except the terminal tips) Contact and Copper alloy The terminals close to the portion to be soldered have nickel barriers (exposed nickel portions). Post Soldering terminals: Sockets: Base: Ni plating, Surface: Pd+Au ash plating (except the terminal tips) Headers: Base: Ni plating, Surface: Au plating ACCTB65E 201608-T 2