17.35 (51 contacts)
AYF31
FPC CONNECTORS
FPC CONNECTORS
FOR FPC CONNECTION Y3FT (0.3 mm pitch) with FPC tabs
(Former Name: YF31)
FEATURES
1. Low-prole, space-saving design 3. Equipped with soldering terminals
(pitch: 0.3mm) for higher mounting strength
The 0.9mm height, 3.0mm depth 4. Easy-to-handle front lock structure
contributes to the miniaturization and 5. Wiring patterns can be located
thickness reduction of target products. underneath the connector.
* The total depth including the lever is 3.2mm.
6. Ni barrier with high resistance to
solder creep
APPLICATIONS
Compact mobile devices Cellular
phones, Digital cameras and DVC, etc
Unit: mm
2. Compatible with FPC with tabs,
reliability is increased through secure
connectibility
Thanks to a design in which the FPC tab
portion attaches to the protruding resin
part, depth is reduced which makes the
product more compact and makes it
possible to position during insertion,
prevent diagonal insertion, and hold
temporarily. This results in secure FPC
insertion. (Y3F is compatible with FPC
without tabs.)
FPC tabs to prevent diagonal
insertion and ensure reliable holding
Soldering terminals (Metal clips)
Compliance with RoHS Directive
resistant to twisting
ORDERING INFORMATION
AYF 3 1 1 5
31: FPC Connector 0.3 mm pitch
(Front lock, ZIF type with FPC tabs)
Number of contacts (2 digits)
Contact direction
1: Bottom contact
Surface treatment (Contact portion / Terminal portion)
5: Au plating/Au flash plating (Ni barrier)
panasonic-electric-works.net/ac
3.0
0.9AYF31
PRODUCT TYPES
Packing
Height Number of contacts Part number
Inner carton Outer carton
15 AYF311515
17 AYF311715
23 AYF312315
25 AYF312515
27 AYF312715
29 AYF312915
0.9 mm 31 AYF313115 5,000 pieces 10,000 pieces
33 AYF313315
35 AYF313515
39 AYF313915
41 AYF314115
45 AYF314515
51 AYF315115
Notes: 1. Order unit;
For mass production: in 1-inner carton (1-reel) units
Samples for mounting check: in 50-connector units. Please contact our sales ofce.
2. Please contact are sales ofce for connectors having a number of contacts other than those listed above.
SPECIFICATIONS
1. Characteristics
Item Specications Conditions
Rated current 0.2A/contact
Rated voltage 50V AC/DC
Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.)
Electrical
No short-circuiting or damage at a detection current of 1 mA
characteristics
Breakdown voltage 150V AC for 1 min.
when the specied voltage is applied for one minute.
Based on the contact resistance measurement method
Contact resistance Max. 80m
specied by JIS C 5402.
Measurement of the maximum force applied until the
FPC holding force Min. 0.23N/contacts contacts (initial) inserted compatible FPC is pulled out in the insertion axis
direction while the connector lever is closed
Mechanical
Measuring the maximum force.
characteristics Contact holding force Min. 0.2N/contacts
As the contact is axially pull out.
Soldering terminal holding Measuring the maximum force.
Min. 0.2N/contacts
force As the soldering terminal is axially pull out.
Ambient temperature 55C to +85C
No freezing at low temperatures. No dew condensation.
55C to +85C (product only)
Storage temperature
40C to +50C (emboss packing)
Sequence
0
5 cycles, 1. 55 C, 30 minutes
3
Thermal shock resistance
insulation resistance min. 100M , 2. ~ , Max. 5 minutes
(with FPC inserted)
+3
contact resistance max. 80m 3. 85 C, 30 minutes
0
4. ~ , Max. 5 minutes
120 hours,
Environmental
Humidity resistance Bath temperature 402C,
insulation resistance min. 100M ,
characteristics
(with FPC inserted) humidity 90 to 95% R.H.
contact resistance max. 80m
24 hours,
Saltwater spray resistance Bath temperature 352C,
insulation resistance min. 100M ,
(with FPC inserted) saltwater concentration 51%
contact resistance max. 80m
H2S resistance 48 hours, Bath temperature 402C, gas concentration 31 ppm,
(with FPC inserted) contact resistance max. 80m humidity 75 to 80% R.H.
Peak temperature: 260C or less Reow soldering
Soldering heat resistance
300C within 5 sec. 350C within 3 sec. Soldering iron
Lifetime
Insertion and removal life 30 times Repeated insertion and removal: min. 10 sec./time
characteristics
Unit weight 51-contact type: 0.09 g
2. Material and surface treatment
Part name Material Surface treatment
Housing: LCP resin (UL94V-0)
Molded portion
Lever: LCP resin (UL94V-0)
Contact portion; Base: Ni plating, Surface: Au plating
Contact Copper alloy
Terminal portion; Base: Ni plating, Surface: Au plating
Soldering terminal portion Copper alloy Base: Ni plating, Surface: Au plating
panasonic-electric-works.net/ac