For FPC
FPC/FFC connectors
(0.3mm pitch) Y3BL
Back lock
0.6 mm low prole, with soldering terminal type
FEATURES
1. Low prole (0.6 mm) and slim design
2. Compatible with FPC 0.2 mm thickness
3. High durability assured with proprietary soldering
terminal
4. Time and effort can be reduced by delivering with lever
open.
5. Wiring patterns can be placed under the connector.
6. Ni barrier with high resistance to solder creepage
APPLICATIONS
Smartphones, tablet PCs and other mobile devices
DETAILED FEATURES
Low prole and slim design Compatible with FPC 0.2 mm High durability assured with
(Contact pitch: 0.3 mm) thickness proprietary soldering terminal
Back lock type with a low prole height of The connector has a 0.6 mm low prole; construction
0.6 mm. Slim construction of 3.35 mm however, it is compatible with FPCs that Housing damage is prevented when FPC
depth (including lever) facilitates device are 0.2 mm thick, facilitating assembly is inserted incorrectly thanks to the two
thinness and miniaturization. work. walls on the FPC inlet side being metal
(soldering terminal).
ORDERING INFORMATION
ACCTB52E 201803-T
1FPC/FFC connectors Y3BL (0.3mm pitch)
PRODUCT TYPES
Packing
Height Number of pins Part number
Inner carton (1-reel) Outer carton
7 AYF350725
11 AYF351125
15 AYF351525
23 AYF352325
25 AYF352525
0.6 mm 5,000 pieces 10,000 pieces
27 AYF352725
31 AYF353125
39 AYF353925
45 AYF354525
51 AYF355125
Notes: 1. Order unit: For volume production: 1-inner carton (1-reel) units. For samples, please contact our sales ofce.
2. Please contact our sales ofce for connectors having a number of pins other than those listed above.
SPECIFICATIONS
1. Characteristics
The followings show specications, when using an applicable FPC (thickness 0.20 mm)
Item Specications Conditions
Rated current 0.2A/pin contact (Max. 5A at total contacts)
Rated voltage 50V AC/DC
Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.)
Electrical
No short-circuiting or damage at a detection current of 1 mA
characteristics
Dielectric strength 150V AC for 1 min.
when the specied voltage is applied for one minute.
Based on the contact resistance measurement method
Contact resistance Max. 160m
specied by JIS C 5402.
Measurement of the maximum force applied until the
Mechanical
FPC holding force Min. 0.10N/pin contact pin contacts (initial) inserted compatible FPC is pulled out in the insertion axis
characteristics
direction while the connector lever is closed
Ambient temperature 55 to +85C No icing. No condensation.
Reow soldering:
Peak temperature: 260C or less
The initial specication must be satised electrically
Soldering heat resistance (on the surface of the PC board around the connector
and mechanically.
terminals)
Soldering iron: 300C within 5 sec. 350C within 3 sec.
55 to +85C (product only)
Storage temperature No icing. No condensation.
40 to +50C (emboss packing)
Conformed to MIL-STD-202F, method 107G
Order Temperature (C) Time (minutes)
0
5 cycles, 1 553 30
Environmental Thermal shock resistance
insulation resistance min. 100M,
2 Max. 5
characteristics (with FPC mated)
+3
contact resistance max. 160m
3 85 0 30
4 Max. 5
0
553
120 hours,
Humidity resistance Conformed to IEC60068-2-78
insulation resistance min. 100M,
(with FPC mated) Temperature 402C, humidity 90 to 95% R.H.
contact resistance max. 160m
24 hours,
Saltwater spray resistance Conformed to IEC60068-2-11
insulation resistance min. 100M,
(with FPC mated) Temperature 352C, saltwater concentration 51%
contact resistance max. 160m
H2S resistance 48 hours, Temperature 402C, gas concentration 31 ppm,
(with FPC mated) contact resistance max. 160m humidity 75 to 80% R.H.
Lifetime
Insertion and removal life 20 times Repeated insertion and removal: min. 10 sec./time
characteristics
Unit weight 51 pins: 0.05 g
2. Material and surface treatment
Part name Material Surface treatment
Housing: LCP resin (UL94V-0)
Molded portion
Lever: LCP resin (UL94V-0)
Contact portion; Base: Ni plating, Surface: Au plating
Contact Copper alloy
Terminal portion; Base: Ni plating, Surface: Au plating
Soldering terminal Copper alloy Ni on base, Pd + Au ash plating
ACCTB52E 201803-T
2