AYF52
FPC CONNECTORS FPC CONNECTORS
FOR FPC/FFC
Y5F (0.5 mm pitch)
CONNECTION
(Former Name: YF52)
FEATURES APPLICATIONS
1. A wide variety of digital equipments Digital equipment, such as PCs, digital
The 0.5mm pitch, 2.0mm height, and TVs, HDDs, car navigation systems,
6.3mm depth are suitable for a variety of home-use game machines,
digital equipment. multifunction fax machines, and
security cameras
6.3 mm
2. Front lock structure with tactile
feedback
The front lock structure facilitates FPC
connection work.
3. Equipped with soldering terminals
Compliance with RoHS Directive
for higher mounting strength
ORDERING INFORMATION
AYF 5 2 1 5
52: FPC Connector 0.5 mm pitch
(Front lock)
Number of contacts (2 digits)
Contact direction
1: Bottom contact
Surface treatment (Contact portion / Terminal portion)
5: Au plating/Au flash plating
PRODUCT TYPES
Packing
Height Number of contacts Part number
Inner carton Outer carton
26 AYF522615
28 AYF522815
34 AYF523415
2.0 mm 40 AYF524015 2,000 pieces 4,000 pieces
45 AYF524515
50 AYF525015
54 AYF525415
Note: Order unit;
For mass production: in 1-inner carton (1-reel) units
Samples for mounting check: in 50-connector units.
Samples: Small lot orders are possible. Please contact our sales ofce.
panasonic-electric-works.net/ac
(110)
2.0 mmAYF52
SPECIFICATIONS
1. Characteristics
Item Specications Conditions
Rated current 0.5A/contact
Rated voltage 50V AC/DC
Insulation resistance Min. 1,000M (initial) Using 250V DC megger
Electrical
No short-circuiting or damage at a detection current of 1 mA
characteristics
Breakdown voltage 250V AC for 1 min.
when the specied voltage is applied for one minute.
Measurement using HP4338B based on the measurement
Contact resistance Max. 45m
method specied by JIS C 5402.
Measurement of the maximum force applied until the
FPC/FFC holding force Min. 0.2N/contacts contacts (initial) inserted compatible FPC is pulled out in the insertion axis
direction while the connector lever is closed
Mechanical
Measuring the maximum force.
characteristics Contact holding force Min. 1.0N/contacts
As the contact is axially pull out.
Soldering terminal holding Measuring the maximum force.
Min. 1.0N/contacts
force As the soldering terminal is axially pull out.
Ambient temperature 55C to +85C
No freezing at low temperatures. No dew condensation.
55C to +85C (product only)
Storage temperature
40C to +50C (emboss packing)
Sequence
1. 40C, 30 minutes
Thermal shock resistance 5 cycles,
2. Normal temperature (+20 to 35C), 5 to 15 minutes
(with FPC/FFC inserted) contact resistance max. 45m
3. +85C, 30 minutes
4. Normal temperature (+20 to 35C), 5 to 15 minutes
Environmental
120 hours,
Humidity resistance Bath temperature 402C,
characteristics
insulation resistance min. 500M ,
(with FPC/FFC inserted) humidity 90 to 95% R.H.
contact resistance max. 45m
Saltwater spray resistance 24 hours, Bath temperature 352C,
(with FPC/FFC inserted) contact resistance max. 45m saltwater concentration 51%
H2S resistance 48 hours, Bath temperature 402C, gas concentration 31 ppm,
(with FPC/FFC inserted) contact resistance max. 45m humidity 75% R.H.
Peak temperature: 260C or less Reow soldering
Soldering heat resistance
300C within 5 sec. 350C within 3 sec. Soldering iron
Lifetime
Insertion and removal life 30 times Repeated insertion and removal: min. 10 sec./time
characteristics
Unit weight 50-contact type: 0.51 g
2. Material and surface treatment
Part name Material Surface treatment
Housing: LCP resin
Molded portion
Lever: Polyamide resin
Contact portion; Base: Ni plating, Surface: Au plating
Contact Copper alloy
Terminal portion; Base: Ni plating, Surface: Au plating
Soldering terminal portion Copper alloy Base: Ni plating, Surface: Sn plating
DIMENSIONS (Unit: mm)
A0.10
0.500.10 (0.20)
When the lever is rotated (reference)
B0.20
5.500.30
C0.30
4.60
(3.25)
(FPC insertion depth)
Number of contacts/
A B C
dimension
26 12.5 16.3 17.1
28 13.5 17.3 18.1
34 16.5 20.3 21.1
40 19.5 23.3 24.1
45 22.0 25.8 26.6
50 24.5 28.3 29.1
54 26.5 30.3 31.1
panasonic-electric-works.net/ac
(110)
1.20 2.00 0.80
2.00
(4.23)