For FPC/FFC* FPC connectors (0.5mm pitch) Y5B/Y5BW Back lock 3. FPC insertion displacement Applicable FPC shape prevention Constructed to make positional displacement difcult With notches by surrounding the (1) The inserted FPC can be temporarily held until the lever is four sides on the FPC closed. inlet side with wall (2) When the lever is closed, the holding contacts lock the FPC by its notches, enhancing the FPC holding force. molding Y5B/Y5BW * (Y5BW is compatible with FPC only.) * 7. Supports V-by-One HS. 4. Wiring patterns can be placed underneath the connector. APPLICATIONS 5. Man-hours for assembly can be RoHS compliant reduced by delivering the connectors A wide range of digital equipment, with their levers opened. including mobile phones, 6. Y5BW features lock holding type, smartphones, PCs, digital still camera, FEATURES including a structure to temporarily and digital video camera. Ideal for 1. Low prole (height: 1.0 mm), space hold the FPC and a higher holding touch panels and LCD backlights, saving back lock type with improved force. which require connectors with a small lever operability. The FPC holding contacts located on number of pins. 2. Mechanical design freedom both ends of the connector facilitate *V-by-One HS: An interface for the next-generation achieved by top and bottom double positioning of FPC and further enhance high-speed signals developed by THine Electronics, contacts. the FPC holding force. Inc. V-by-One is a registered trademark of THine Structure to lock Electronics, Inc. notches on both ends of the FPC with holding contacts 1.00 Unit: mm 4 pin contacts (Y5B: minimum) ORDERING INFORMATION Y5B AYF 5 3 3 5 53: FPC Connector Y5B (0.5 mm pitch) Back lock Number of pins (2 digits) Function 3: Top and bottom double contacts Surface treatment (Contact portion / Terminal portion) 5: Au plating/Au plating (Ni barrier) Y5BW AYF 5 3 6 5 T 53: FPC Connector Y5BW (0.5 mm pitch) Back lock Number of pins (2 digits) Function 6: Top and bottom double contacts, lock holding type Surface treatment (Contact portion / Terminal portion) 5: Au plating/Au plating (Ni barrier) T: Suction area expansion type ACCTB1E 201602-T 1 3.20FPC connectors Y5B/Y5BW (0.5mm pitch) PRODUCT TYPES Y5B Y5BW Packing Height Number of pins Part number Number of pins Part number Inner carton (1-reel) Outer carton 4 AYF530435 2 AYF530265T 5 AYF530535 3 AYF530365T 6 AYF530635 4 AYF530465T 8 AYF530835 6 AYF530665T 10 AYF531035 8 AYF530865T 12 AYF531235 10 AYF531065T 14 AYF531435 12 AYF531265T 16 AYF531635 14 AYF531465T 1.0 mm 5,000 pieces 10,000 pieces 24 AYF532435 22 AYF532265T 28 AYF532835 26 AYF532665T 30 AYF533035 28 AYF532865T 32 AYF533235 30 AYF533065T 34 AYF533435 32 AYF533265T 40 AYF534035 38 AYF533865T 42 AYF534235 40 AYF534065T 50 AYF535035 48 AYF534865T Notes: 1. Order unit For volume production: 1-inner carton (1-reel) units For samples, please contact our sales ofce. 2. Please contact our sales ofce for connectors having a number of pins other than those listed above. SPECIFICATIONS 1. Characteristics The followings show specications, when using an applicable FPC (thickness 0.30 mm) Item Specications Conditions Rated current 0.5A/pin contact (Except for holding contact) Rated voltage 50V AC/DC Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.) Electrical No short-circuiting or damage at a detection current of 1 mA characteristics Dielectric strength 250V AC for 1 min. when the specied voltage is applied for one minute. Based on the contact resistance measurement method Contact resistance Max. 100m specied by JIS C 5402. Y5B: Min. 0.2N/pin contact pin contacts (initial) Measurement of the maximum force applied until the Mechanical FPC holding force Y5BW: Min. 0.2N/pin contact pin contacts + 2.0N inserted compatible FPC is pulled out in the insertion axis characteristics (initial) direction while the connector lever is closed Ambient temperature 55C to +85C No icing or condensation. 55C to +85C (product only) Storage temperature 40C to +50C (emboss packing) Conformed to MIL-STD-202F, method 107G Order Temperature (C) Time (minutes) 0 1 55 30 5 cycles, 3 Thermal shock resistance insulation resistance min. 100M, 2 Max. 5 (with FPC mated) +3 contact resistance max. 100m 3 85 30 0 4 Max. 5 0 55 3 Environmental characteristics 120 hours, Conformed to IEC60068-2-78 Humidity resistance insulation resistance min. 100M, Bath temperature 40C2C, (with FPC mated) contact resistance max. 100m humidity 90% to 95% R.H. 24 hours, Conformed to IEC60068-2-11 Saltwater spray resistance insulation resistance min. 100M, Bath temperature 35C2C, (with FPC mated) contact resistance max. 100m saltwater concentration 5%1% Bath temperature 40C2C, H2S resistance 48 hours, gas concentration 3 ppm 1 ppm, (with FPC mated) contact resistance max. 100m humidity 75% to 80% R.H. Peak temperature: 260C or less Reow soldering Soldering heat resistance 300C within 5 sec. 350C within 3 sec. Soldering iron Lifetime Insertion and removal life 20 times Repeated insertion and removal: min. 10 sec./time characteristics Unit weight Y5B 50 pin contacts: 0.16 g 2. Material and surface treatment Part name Material Surface treatment Housing: LCP resin (UL94V-0) Molded portion Lever: LCP resin (UL94V-0) Contact portion Base: Ni plating, Surface: Au plating Contact Copper alloy Terminal portion Base: Ni plating, Surface: Au plating Holding contact (Only Y5BW) Copper alloy Terminal portion Base: Ni plating, Surface: Au plating Soldering terminals Copper alloy Base: Ni plating, Surface: Au plating ACCTB1E 201602-T 2