Thick Film Chip Resistors Thick Film Chip Resistors 01005, 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512 Type: ERJ XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T Features Small size and lightweight High reliability Metal glaze thick lm resistive element and three layers of electrodes Compatible with placement machines Taping packaging available Suitable for both re ow and ow sol der ing Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B Explanation of Part Numbers ERJXGE, 1GE, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Series, 5 % type 1 2 3 4 5 6 7 8 9 10 11 12 E R J 3 G E Y J 1 0 2 V Packaging Methods Marking Resistance Tolerance Product Code Size, Power Rating Code Packaging Marking Thick Film Type : inches Power R. Code Code Tolerance Pressed Carrier Taping Chip Resistors XGE: 01005 0.031 W J 5% Value Marking on 2mm pitch, 20000 pcs. Y Y black side 1GE : 0201 0.05 W 0 Jumper (Only XGE type) No marking 2GE : 0402 0.063 W Nil Pressed Carrier Taping 3GE : 0603 0.1 W 2mm pitch, 15000 pcs. C (Only 1GE type) 6GE : 0805 0.125 W Resistance Value 8GE : 1206 0.25 W Punched Carrier Taping The first two digits are significant figures of resistance and X 2mm pitch, 10000 pcs. 14 : 1210 0.25 W the third one denotes number of zeros following. (Only 2GE type) Decimal Point is expressed by R as 4.7 = 4R7. 12 : 1812 0.5 W Punched Carrier Taping Jumper is expressed by R00. 12Z : 2010 0.5 W V (Only 3GE, 6GE, 8GE type) 1T : 2512 1W Embossed CarrierTaping U (Only 14, 12, 12Z, 1T type) When omitted, the rest of the P/N factors shall be moved up respectively. (Only XGE, 1GE, 2GE type) Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Mar. 2005Thick Film Chip Resistors Dimensions in mm (not to scale) Construction L a W Protective coating t Electrode (Inner) Alumina substrate b Dimensions (mm) Type Mass (Weight) (inches) (g/1000 pcs.) LWa b t ERJXG 0.02 0.02 0.03 0.03 0.02 0.40 0.20 0.10 0.10 0.13 0.04 (01005) ERJ1G 0.03 0.03 0.05 0.05 0.03 0.60 0.30 0.10 0.15 0.23 0.15 (0201) Electrode (Between) ERJ2G 0.05 0.05 0.10 0.05 0.05 1.00 0.50 0.20 0.25 0.35 0.8 (0402) ERJ3G 0.15 +0.15 0.20 0.15 0.10 1.60 0.80 0.30 0.30 0.45 2 0.05 (0603) ERJ6G 0.20 0.10 0.20 0.20 0.10 2.00 1.25 0.40 0.40 0.60 4 (0805) ERJ8G +0.05 +0.05 0.20 0.20 0.10 3.20 1.60 0.50 0.50 0.60 10 0.20 0.15 (1206) ERJ14 0.20 0.20 0.20 0.20 0.10 3.20 2.50 0.50 0.50 0.60 16 Thick film (1210) Electrode (Outer) resistive element ERJ12 0.20 0.20 0.20 0.20 0.10 4.50 3.20 0.50 0.50 0.60 27 (1812) ERJ12Z 0.20 0.20 0.20 0.20 0.10 5.00 2.50 0.60 0.60 0.60 27 (2010) ERJ1T 0.20 0.20 0.20 0.20 0.10 6.40 3.20 0.65 0.60 0.60 45 (2512) Ratings <For Resistor> Category Temperature Limiting Element Maximum Overload Resistance Resistance T.C.R. Type Power Rating (2) Range (Operating 6 Voltage (Maximum Voltage Tolerance Range 10 /C Temperature Range) (inches) at 70 C (W) (1) RCWV) (V) (V) (%) ( ) (ppm/C) (C) <100 :300 ERJXG 0.031 15 30 5 10 to 1 M (E24) 55 to +125 (01005) 100 <:200 ERJ1G 0.05 15 30 5 1 to 10 M (E24) 55 to +125 (0201) ERJ2G <10 : 0.063 50 100 5 1 to 10 M (E24) 55 to +155 (0402) 100 to +600 ERJ3G 0.1 50 100 5 1 to 10 M (E24) 55 to +155 (0603) ERJ6G 0.125 150 200 5 1 to 10 M (E24) 55 to +155 (0805) 10 to 1 M : ERJ8G 0.25 200 400 5 1 to 10 M (E24) 55 to +125 (1206) 200 ERJ14 0.25 200 400 5 1 to 10 M (E24) 55 to +125 (1210) ERJ12 0.5 200 400 5 1 to 10 M (E24) 55 to +125 (1812) 1 M <: ERJ12Z 0.5 200 400 5 1 to 10 M (E24) 55 to +125 400 to +150 (2010) ERJ1T 1200 400 5 1 to 1 M (E24) 55 to +125 (2512) (1) Rated Continuous Working Voltage (RCWV) shall be de termined from RCWV= Power Rating Re sis tance Values, or Limiting Element Voltage (max. RCWV) list ed above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be de termined from SOTV=2.5 Power Rating or max. Over load Volt age listed above which ev er less. <For Jumper> Power Derating Curve Type Rated Current Maximum Overloa d Current For resistors operated in ambient temperatures above (inches) (A) (A) 70 C, power rating shall be derated in accordance ERJ1G (0201) 0.5 1 with the gure below. ERJ2G (0402) 12 ERJ3G (0603) 55 C 70 C 100 ERJ6G (0805) 80 ERJ8G (1206) 60 3G, 6G, 8G ERJ14 (1210) 40 24 XG, 1G,2G,14,12,12Z,1T 155 C ERJ12 (1812) 20 125 C 0 ERJ12Z (2010) 60 40 20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) ERJ1T (2512) Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Mar. 2005 Rated Load (%)