DP-102-N-P Panasonic

For gas Digital Pressure Sensor DP-101(A) / 102(A) SERIES Ver. 2 Conforming to Certification Recognition EMC Directive DP-101(A)/102(A) only Pressure Sensor Evolutions To Come panasonic.net/id/pidsx/global 2013.11Achieved further efficiency with 4 upgrades, keeping the same operability Note: The upgrade will be implemented from production in October 2013, based on stock status. Upgrade 1 Superior visibility Improved visibility in Digital Display Improvements to the digital display deliver a wide viewing angle along with increased clarity. The display pressure range and set pressure range have also been increased. Old DP-100 series New DP-100 series Upgrade 2 Long-distance transmission of analog output Addition of analog current output capability to multifunctional models Users can now select either voltage output or current output as analog output according to their application. Upgrade 3 Reduced environmental impact % lower 14 after update 14% lower power consumption (during normal operation) Thanks to a redesign of its circuitry, power consumption of Old DP-100 series New DP-100 series the low-power-consumption DP-100 series during normal 840 mW (normal operation) 720 mW (normal operation) operation has been reduced by 14%. The display is shut Up to % lower 50 off entirely during ECO / FULL mode operation for power in ECO mode savings of up to 50% compared to normal operation, and display brightness is lowered during ECO / STD mode Normal operation ECO / FULL operation operation for power savings of up to 30% compared to 720 mW 360 mW normal operation. Upgrade 4 Enhanced power circuitry Addition of a reverse polarity protection circuit to the transistor output circuit To prevent from breakage due to miswiring. 1