TESTING HIGHLY SENSITIVE 1500 V FCC SURGE WITHSTANDING DS-RELAYS MINIATURE RELAY 9.9 FEATURES .390 35.24 1.387 High sensitivity: 200 mW pick-up power 9.8 .386 100 mW pick-up power types available Latching types available 9.9 20 .390 High switching capacity: 60 W, 125 V A .787 9.8 High breakdown voltage: 1,500 V FCC surge between open contacts .386 9.9 1,000 V AC between open contacts DS4E 15 .390 .590 DIP-1C type can be used with 14 pin IC socket 9.8 .386 2C type can be used with 16 pin IC socket, 4C type can be used with 2 sets of 14 pin IC sockets DS2E Gold-cap silver palladium types available for 2 Form C type DS1E mm inch FLOC Type: Low bounce time High contact forces Large load switching range 10 -10 -- 90W (250 VA) SPECIFICATIONS Contact Characteristics (at 20C 68F) Arrangement 1, 2 , 4 Form C Floc type 2 Form C 20 cpm at rated load Max. operating speed 50 cps at low level load Initial contact resistance, max. 50 m 1 (By voltage drop 6 V DC 1 A) Initial insuration resistance* Min. 100 M (at 500 V DC) Contact material Gold-clad sliver Type of relay (DS1-S type) (Other types) Initial Max. switching power 60 W, 125 VA Between open contacts 500 Vrms 1,000 Vrms break- Rating down volt- Max. switching voltage 220 V DC, 250 V AC Between contacts sets 1,000 Vrms 2 (resis- age* Max. switching current 2 A DC, AC 3 A DC, AC Between contacts and coil 1,000 Vrms 1,500 Vrms tive) Max. carrying current 3 A DC, AC 4 A DC, AC FCC surge voltage between contacts 1,500 V (Expect DS1-S type) and coil 8 Expected life (min. operations) 10 7 3 Mechanical (at 600 cpm) (1 Form C 2 coil latching type: 10 ) Operate time* (at nominal voltage) Approx. 3 ms 5 3 510 Release time (without diode)* (at Electrical 2 A 30 V DC resistive Approx. 2 ms nominal voltage) 1 A 30 VDC resistive 3 Set time* (at nominal voltage) Approx. 3 ms 7 * Gold capped silver-palladium contact also available for 2 Form C 10 operations at 3 0.1 A 50 V DC resistive Reset time* (at nominal voltage) Approx. 3 ms Coil (polarized) (at 20C 68F) Temperature rise Max. 65C (at nominal voltage, Contact current: 2A) Single Minimum operating power Approx. 200 mW 2 side 1C, 2C:Min. 490 m/s 50 G 4 Functional* Nominal operating power Approx. 400 mW 2 stable 4C:Min. 294 m/s 30 G Shock resistance M 5 2 Minimum set and reset power Approx. 90 mW 1 coil Destructive* Min. 980 m/s 100 G type latching Nominal set and reset power Approx. 180 mW 10 to 55 Hz 6 Functional* at double amplitude of 3.3 mm Minimum set and reset power Approx. 180 mW 2 coil Vibration resistance latching 10 to 55 Hz Nominal set and reset power Approx. 360 mW Destructive at double amplitude of 5 mm Single Minimum operating power Approx. 100 mW (128 mW)* Conditions for operation, Ambient 40C to +70C side 7 Nominal operating power Approx. 200 mW transport and storage* temp. 40F to +158F stable (Not freezing and condens- S Minimum set and reset power Approx. 45 mW (58 mW)* 1 coil Humidity 5 to 85% R.H. ing at low temperature) type latching Nominal set and reset power Approx. 90 mW 1 Form C Approx. 3.2g .11oz Minimum set and reset power Approx. 90 mW (115 mW)* 2 coil Unit weight 2 Form C Approx. 4g .14oz latching Nominal set and reset power Approx. 180 mW 4 Form C Approx. 7g .25oz * For 1 Form C high sensitive types. Remarks The FCC (Federal Communica- * Specications will vary with foreign standards certication ratings. tion Commission) requires the fol- 1 * Measurement at same location asInitial breakdown voltag section lowing standard as Breakdown 2 1500V * Detection current: 10 mA Voltage speciication. 3 * Excluding contact bounce time 750V 4 * Half-wave pulse of sine wave: 11ms detection time: 10 s 5 * Half-wave pulse of sine wave: 6ms 10 s 160 s 186DS Remarks, continued TYPICAL APPLICATIONS 6 * Detection time: 10 s 7 * Refer to 5. Conditions for operation, transport and storage mentioned Telecommunication equipment in AMBIENT ENVIRONMENT (Page 61) Ofce equipment Computer peripherals Security equipment Measuring instrumentation ORDERING INFORMATION Ex. DS 2 E M L2 DC 48 V R Contact arrangement Classification of type Sensitivity Operating function Coil voltage 1: 1 Form C E: Amber sealed type M: 400mW nominal operating power Nil: Single side stable DC 1.5, 3, 5, 6, 2: 2 Form C S: 200 mW nominal operating power L: 1 coil latching 9, 12, 24, 48 V 4: 4 Form C Nil: 200 mW DS2E with FLOC contact L2: 2 coil latching F: 140 mW DS2E with FLOC high sensitive (Notes) 1. *Reverse polarity types available (add suffix R). 2. For UL/CSA recognized types, add suffix UL/CSA. 3. Standard packing: Carton: 50 pcs. Case: 500 pcs. TYPES Single side stable Part No. Nominal Voltage, V DC 1 Form C 2 Form C 4 Form C 1.5 DS1E-M-DC1.5V DS2E-M-DC1.5V DS4E-M-DC1.5V 3 DS1E-M-DC3V DS2E-M-DC3V DS4E-M-DC3V 5 DS1E-M-DC5V DS2E-M-DC5V DS4E-M-DC5V M 6 DS1E-M-DC6V DS2E-M-DC6V DS4E-M-DC6V (400 mW) 9 DS1E-M-DC9V DS2E-M-DC9V DS4E-M-DC9V type 12 DS1E-M-DC12V DS2E-M-DC12V DS4E-M-DC12V 24 DS1E-M-DC24V DS2E-M-DC24V DS4E-M-DC24V 48 DS1E-M-DC48V DS2E-M-DC48V DS4E-M-DC48V 1.5 DS1E-S-DC1.5V DS2E-S-DC1.5V DS4E-S-DC1.5V 3 DS1E-S-DC3V DS2E-S-DC3V DS4E-S-DC3V 5 DS1E-S-DC5V DS2E-S-DC5V DS4E-S-DC5V S 6 DS1E-S-DC6V DS2E-S-DC6V DS4E-S-DC6V (200 mW) 9 DS1E-S-DC9V DS2E-S-DC9V DS4E-S-DC9V type 12 DS1E-S-DC12V DS2E-S-DC12V DS4E-S-DC12V 24 DS1E-S-DC24V DS2E-S-DC24V DS4E-S-DC24V 48 DS1E-S-DC48V DS2E-S-DC48V DS4E-S-DC48V 1 coil latching Part No. Nominal Voltage, V DC 1 Form C 2 Form C 4 Form C 1.5 DS1E-ML-DC1.5V DS2E-ML-DC1.5V DS4E-ML-DC1.5V 3 DS1E-ML-DC3V DS2E-ML-DC3V DS4E-ML-DC3V 5 DS1E-ML-DC5V DS2E-ML-DC5V DS4E-ML-DC5V M 6 DS1E-ML-DC6V DS2E-ML-DC6V DS4E-ML-DC6V (180 mW) 9 DS1E-ML-DC9V DS2E-ML-DC9V DS4E-ML-DC9V type 12 DS1E-ML-DC12V DS2E-ML-DC12V DS4E-ML-DC12V 24 DS1E-ML-DC24V DS2E-ML-DC24V DS4E-ML-DC24V 48 DS1E-ML-DC48V DS2E-ML-DC48V DS4E-ML-DC48V 1.5 DS1E-SL-DC1.5V DS2E-SL-DC1.5V DS4E-SL-DC1.5V 3 DS1E-SL-DC3V DS2E-SL-DC3V DS4E-SL-DC3V 5 DS1E-SL-DC5V DS2E-SL-DC5V DS4E-SL-DC5V S 6 DS1E-SL-DC6V DS2E-SL-DC6V DS4E-SL-DC6V (90 mW) 9 DS1E-SL-DC9V DS2E-SL-DC9V DS4E-SL-DC9V type 12 DS1E-SL-DC12V DS2E-SL-DC12V DS4E-SL-DC12V 24 DS1E-SL-DC24V DS2E-SL-DC24V DS4E-SL-DC24V 48 DS1E-SL-DC48V DS2E-SL-DC48V DS4E-SL-DC48V 187