ECH-U1683JC9 Panasonic

Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor ECHU(C) series Stacked metallized PPS film as dielectric with simple mold-less construction. Features Small in size Low loss and excellent frequency characteristics For reflow soldering RoHS compliant Recommended applications Time-constant Filtering Oscillation and resonance Resonance circuit for LCD backlight inverter unit Explanation of part number 1 2 3 4 5 6 7 8 9 10 11 E C H U 1 C Cap. Tol. Product code Dielectric & Rated voltage Capacitance Suffix1 Suffix2 construction Code R. voltage DC Code Cap. Tol. Code Tape width C 100 V G 2 9 12 mm J 5 V 16 mm Specifications Category temp. range 55 to +105 (Including temperature-rise on unit surface) Rated voltage DC 100 V Capacitance range 0.010 F 0.22 F (E12) Capacitance tolerance 2 %(G), 5 %(J) Dissipation factor (tan ) tan 0.6 % (20 , 1 kHz) Withstand voltage Between terminals Rated voltage (V) 150 % 60 s Insulation resistance (IR) IR 3000 M (20 , 10 V, 60 s) Reflow soldering260 max. and 95 sec max. at more than 220 Soldering conditions (Temp. at capacitor surface) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. Construction Dimensions Unit : mm Size code L W H *1 *1 0.4 0.4 E1 4.8 3.3 1.4 L0.2 W0.3 E2 4.8 3.3 2.0 E3a 4.8 3.3 2.4 E3 4.8 3.3 2.8 D1 6.0 4.1 1.8 D2 6.0 4.1 2.0 D3 6.0 4.1 2.4 Element D4 6.0 4.1 2.8 0.350.20 0.350.20 (Stacked) D5 6.0 4.1 3.2 Outer electrode *1: To be applied only for size code Z,Y Z 7.1 5.0 Y 7.1 6.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Dec-15 H0.2 *1 0.3Plastic Film Capacitors ECHU(C) series Taping specification for automatic mounting Refer to the page of taping specifications Rating Dimensions Quantity Capacitance tolerance2 (G), 5 (J) Rated voltage 100 V CapacitanceF Dimensions Q ty Part No. Size code PCS) L W H 0.010 ECHU1103C9 4.8 3.3 1.4 E1 0.012 ECHU1123C9 4.8 3.3 1.4 E1 3000 0.015 ECHU1153C9 4.8 3.3 2.0 E2 0.018 ECHU1183C9 4.8 3.3 2.0 E2 0.022 ECHU1223C9 4.8 3.3 2.4 E3a 2000 0.027 ECHU1273C9 4.8 3.3 2.8 E3 0.033 ECHU1333C9 6.0 4.1 1.8 D1 3000 0.039 ECHU1393C9 6.0 4.1 2.0 D2 0.047 ECHU1473C9 6.0 4.1 2.4 D3 0.056 ECHU1563C9 6.0 4.1 2.8 D4 2000 0.068 ECHU1683C9 6.0 4.1 3.2 D5 0.082 ECHU1823C9 7.1 5.0 2.8 Z 0.10 ECHU1104C9 7.1 5.0 3.0 Z 1500 0.12 ECHU1124C9 7.1 5.0 3.4 Z 0.15 ECHU1154CV 7.1 6.3 3.4 Y 0.18 ECHU1184CV 7.1 6.3 4.0 Y 1000 0.22 ECHU1224CV 7.1 6.3 4.8 Y Capacitance tolerance code Recommended for land dimensions Electrode Unit : mm Land dimensions Size code Reflow soldering A B C Land E1, E2, E3a, E3 2.6 6.6 3.0 D1, D2, D3, D4, D5 3.8 7.8 3.8 Z 4.5 9.0 4.6 Y 4.5 9.0 5.7 A B lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when Recommender for Land dimensions is adopted. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01-Dec-15 C